NAGAR ABHIVRUDDHI GRANT

Dismantling, clearing away and careful stacking materials for reuse - Stone masonry

Dismantling of existing Concrete structures like culverts, bridges, and other structure comprising of masonry, cement concrete, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH

Dismantling, clearing away and careful stacking materials for reuse - RCC slab over drain

Removal of Wet Silt and Sludge from Sullage Drain with the aid of baskets and vessels

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Carting away the surplus excavated earth from the work site with a lead of 5.0 km beyond initial lead including loading, unloading and conveyance but excluding stacking charges etc., complete for roads 1 cum

Bailing out water from the pipe line trenches with oil engine driven pumpsets, including hire charges, fuel charges and wages for Driver and Helper.

Supplying and packing of EC bags filled with sand including cost of sand, EC bags, filling charges, stiching charges wirh country thread, conveyance to the site placing on position etc., complete.,

Providing concrete for plain/reinforced concrete in open foundations using 40 mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

R.C.C. grade M 30 (Design Mix) using 20 mm Graded Metal (MORD & MORTH 12.8 G)

Supplying, fitting and placing HYSD - Fe-500 bar reinforcement in foundation complete including wastage, as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100, 1600 MORTH for Bars 36 mm dia and above, where welding required to be done compulsorily.

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH

Providing weep holes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 MORD / 2706 & 2200 MORTH.

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 MORD / Sections 1500, 1600 & 1700 MORTH

Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications, in sections 1500, 1600, 1700 & 2703 MORTH.

Supplying, fitting, and placing HYSD bar reinforcement(Fe-500 in superstructure complete including wastage, as per drawing and technical specifications Clauses 1002, 1010 and 1202 MORD / 1600 MORTH, for Bars 36 mm dia and above, where welding required to be done compulsorily.

Plastering with cement mortar (1:3) 15 mm thick on brickwork in parapet as per technical specifications Clauses 613.4 and 1208.4 MORD

Painting Two Coats on New Concrete Surfaces

Supply of high performance expansion joint filler board conforming to M.O.S.T "Silflex" Capcell HD-100 - 20 mm THICK