Karnataka

Active

Works

Roads

Improvement of road in Dumminasara Mukambika subba poojari house near 500 mtr CC road at Adnalli Grama Bisalkoppa GP Sirsi TQ (Others Category)

Rural Development and Panchayat Raj Department

RDPR Division Office Sirsi | Uttara Kannada, Karnataka

Amount: ₹25.1 LCloses: 17 Jul 2026

Tender Value

₹25.1 L

EMD Value

₹50,170

Closing Date

17 Jul 2026, 9:30 pm

Tender Inviting Organisation

Name

Rural Development and Panchayat Raj Department

Work Description

Improvement of road in Dumminasara Mukambika subba poojari house near 500 mtr CC road at Adnalli Grama Bisalkoppa GP Sirsi TQ (Others Category)

Tender Information

Tender ID

RDPR/2026-27/RD/WORK_INDENT27541

Reference Number

RDPR/2026-27/RD/WORK_INDENT27541

Tender Type

Open

Product Category

Roads

Location

RDPR Division Office Sirsi

Source Website

Subscribe to view

Documents Required

11 documents required · 11 mandatory

Technical Bid

RequiredThe Executive Engineer, P.R.E. SIRSI Division, SIRSI invites tenders from eligible tenderers, who have been registered in KPWD and with e procurement portal for the construction of works

RequiredFinancial Turnover Certificate Should be Enclosed For the last previous 5 years From Charted Accountent in a single page Rs. 25.08 Lakhs

RequiredTenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity should be not less than Rs. 25.08 lakhs

RequiredNationalized BANK LOC Certificate with 30 Percentage Rs. 7.53 Lakhs and name of work or indent number should be add.

RequiredVAT/ GST Certificate

Requirednature of work Satisfactorily completed as a prime contractor at least one similar work such as CC ROAD work of value not less than 50 Percentage of the cost of work i.e., Rs. 12.54 lakhs during last five years.

RequiredKW-2 format 1.4 A & 1.4 B compulsary Submitted with details

RequiredThe Contractor should scan the KPWD Registration Copy

RequiredThe Contractor should scan the PAN Card

RequiredContractors Postal Address and Mobile No.

RequiredTender Bidder should compulsarily upload bid capacity calculation in Prescribed Formula A x V x N-B as mentioned in KW-2 Tender Document and bidder should compulsarily upload ongoing works Works in Hand details

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KPPP on or before the last date and time of bid submission.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

The bid is to be submitted through GOK KPPP platform www.kppp.karnataka.gov.in only.

Tenderers who have not registered in the GOK KPPP portal should be registered through web site www.kppp.karnataka.gov.in

The Tenderer should obtain tender documents through KPPP web site www.kppp.karnataka.gov.in . in at free of cost. Additional conditions and informations also can be obtained through the above mentioned website.

Bidders / Contractors submit the bid on the website itself (for help on KPPP / e-payment, please contact helpdesk No. 08025501216 and 080 25501227 from Monday to Saturday during 9.00 AM to 9.00 PM.)

Any damage during the progress of work, the damage cost should be beard by the contractor.

Tender application cost will not be refundable or exchangeable in case of cancellation of tender.

All materials should be in good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost.

The work should be carried out in accordance with the standard specifications specified by the department. Maintenance period from the contractor for the above works is 1 year from the date of completion of work.

Corrigendums / modifications / correction, if any, will be published in the website only.

More details should be collected from the office at working hours

The Executive Engineer rights accept and reject the tender without intimation or information

The Executive Engineer PRE SIRSI Division SIRSI invites tenders from eligible tenderers who have been registered in KPWD with kppp portal for the construction of works

Contractor should made an agreement within 20 days of tender acceptance date and work should be carried out immediately after Signing agreement. If not tender will be cancelled at the contractors own risk and cost

GST Shall be paid to the tendered amount separately

The Contractor should scan the KPWD Registration Copy.

The Contractor should scan the PAN Card and GST No.

Contractors Postal Address and Mobile No.

Bidder can access tender documents on the website, fill them and submit the completed tender document into electronic tender on the website https://www.kppp.karnataka.gov.in/ after submitting the EMD and tender processing fee in the form of e-payment. EMD will be refunded only after acceptance of successful bidder.

If the rates quoted by the Contractor is lesser than the amount put to tender the difference cost (Additional Security Deposit) should be paid by the contractor through FDR in the favor of Executive Engineer at the time of Agreement

Contractor should obey with the above conditions in addition to the KW-2

Turn over Certificate should be enclosed for the last previous 5 years from charted accountent in singal page and achieved in at least two financial year a minimum financial turnover is equal or above of Rs: 25.08 lakhs

Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity should be not less than Rs: 25.08 lakhs

Line of credit : Liquid assets and or availabilty of credit facilties of not less than 30% of the amount of contract ie, Rs: 7.53 lakhs (Certificates from Nationalized banks)

nature of work : Satisfactorily completed as a prime contractor at least one similar work such as CC ROAD work of value not less than 50% of the cost of work i.e., Rs. 12.54 lakhs during last five years.

Tender Bidder should compulsarily upload bid capacity calculation in Prescribed Formula (A x V x N-B ) as mentioned in KW-2 Tender Document and bidder should compulsarily upload ongoing works (Works in Hand) details

Fee & Financial Details

Tender Fee Amount

₹630

EMD Fee Amount

₹50,170

Important Dates

Last Activity

2 Jul 2026

Published

2 Jul 2026

Download Ends

17 Jul 2026

BOQ Preview

•

Improvement of road in Dumminasara Mukambika subba poojari house near 500 mtr CC road at Adnalli Grama Bisalkoppa GP Sirsi TQ (Others Category)

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and...

•

Surface Drains in Soil Construction of unlined surface drains of average cross sectional area 0.40 m2 in soil to specified lines, grades,levels and dimensions. Excavated material to be used in embankm...

•

Water Bound Macadam

•

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling ...

•

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...

•

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine withdiamond studded saw within 4-8 hours of casting of bay / slabetc. complete inclu...

•

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope andcompacted to meet...

•

Providing and fixing RCC name board of size 1.35x0.60x0.04 m fixed in reinforced cement concrete poles of size 0.10x0.10x2.60m in cement concrete M 20 proportion using 20mm and down size graded met...

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

•

Providing and laying Reinforced Cement Concrete pipe light duty NP2 for culverts, roadway utilities& crossingsas per IS 458:2003 in Single row including pointing ends and fixing collars with cement mo...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

•

including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

notification.pdf

Others - NOTIFICATION • 1.49 MB

KW 2.pdf

Others - KW-2 Details • 0.34 MB

Below 50 lakhs Govt Order.pdf

Others - govt order copy • 0.91 MB

Ready to Participate?

Download all tender documents and submit your bid