C/O PHC building (level-III) at Kakira in Tehsil Bhatiyat, Distt. Chamba, HP (SH- Providing Tube fixture, Ceiling/Exhaust fan etc.).

Amount

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Make: Usha, Bajaj, Crompton

Exhaust Fan, Heavy duty, (Domestic) 300 mm sweep

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Providing, Installation, testing and commissioning of ceiling fan with modular step type electronic fan regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-

1200mm sweep. Make:- Ushal (Technix Plus 3 Star)/ Bajaj (Ultima)

1400mm sweep. Make:- Ushal (Technix Plus)/ Bajaj (Ultima)

Providing and installation of cabin fan of folowing size in the existing opening including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required.

400mm sweep, Swing Gyro Cabin fan, Makes:- Havells(Model No.Swing Gyro Cabin fan)/Usha/Bajaj

Providing and fixing decorative extruded T-8: Tara-M LED CRCA Batten with decorative end cap complete with retrofit T8 polycarbonate/glass tube LED driver, snap-on-installers, having surge protection circuit of 3KW and aluminium heat sink, suitable for LED up to 20 watt complete with all accessories, connections, testing and commissioning etc. as required.Make: C&S, Philips, Havells, Panasonic or any other approved by Engineer-in-Charge.

LED 20 watt.

Supplying and fixing surface mounting following size LED solution suitable for surface application with the use of the latest technology 6/12/18 Watt (600/1200/1800 lumen) 6500K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc. as required.

Make:C&S./Panasonic/ Philips/Jaquar.

LED fitting Round type 6 Watt.

Cat. No. LTCRSUR6HP LEDRND/W

LED fitting Round type 12 Watt.

Cat. No. LTCRSUR 12 HP LEDRND/W

Supplying and fixing surface mounting following size LED solution suitable for surface application with the use of the latest technology 36 Watt (3600 lumen) 6000K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc. as required.

Make:Jaquar./Panasonic/ Wipro

Sauver (Surface)-36 Watt.(2' x2')

Cat. No. LSVR01S036SC

Sauver (Surface)-42 Watt.(1' x4')

Cat. No. LSVR03S042XN

Supplying and fixing recess mounting following size LED solution suitable for surface application with the use of the latest technology 36 Watt (3600 lumen) 6000K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc. as required.

Make:Jaquar./Panasonic/ Wipro

Sauver (Surface)-36 Watt.(2' x2')

Cat. No. LSVR01S036SC

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required.

Mirror light 460 mm, single lamp.(Category-A)

Supplying and fixing of Bulk head fitting, CFL type of all sizes and shapes, containing one No. thread type CFL lamp holder (s), complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. (Category-A)

Supplying and fixing LED retrofit lamp suitable for B-22 holder base fittings with polycarbonate diffuser and aluminium heat sink as required complete in all respects.

7 Watt LED, B-22

Makes:- C&S (Cat.No.LTHPLEDLAMP7W/ B22) / Panasonic / Osram.

Supplying and fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:-

25 Liter capacity water heater (Cat-A)

Providing and errection of LED 45 watt Street light luminaries powder coated pressure die-cast aluminium SMDLED Street light with heat resistant toughened glass including connections, testing and commisioning etc; as required complete in all respects.

LED Street Light, 45 Watt

Makes:- Jaquar (Cat No: LSRT01S045XC), 5700K) /Panasonic/Wipro

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-

25 mm. dia

50 mm. dia

Supplying and drawing LAN cable CAT 6, solid copper conductor protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.

Make:-Polycab/D-Link/Havells or its equivalent.

Supplying and fixing RJ 45 Jack with cat 6 in the existing switch box / cover plate including connections etc. as required.

RJ 45 Jack with cat 6 (1 moudule)

Makes:- Legrand Mylinc (Cat. No.: AHLKJWW451)/ Anchor/L&T Schneider.

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-

2 modules (78mmx78mmx50mm)

Supplying and fixing 4 Port Computer Hub 1000 (MBPS) million bits or 1000 Kilo bits of data per second complete with all accessories, connections, testing and commissioning etc. as required. Make: D-Link or any other approved by Engineer-in-Charge.

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, unarmoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Unarmoured cable 50 sq. mm (3.5 core) Make: KEI/ SSCI/Havells

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:-

Armoured cable 50 sq. mm (3.5 core) Make: KEI/ SSCI/Havells

Vishal Suri

M/s Jamwal nxt gen energy solutions