Improments Manjari Devkatewadi Dhayati Shivane Bagalwadi to MDR 86 (ODR 92) CH. 13.00 To 14.00 Tal.Sangola.

Item 1 Labour charges for removing grass, thorney shrubs, Jungli shrub, Kubabul and alike grass along roadside making the ground clean by showel and phavaras etc. complete. SSR.153/21/33 Sp.NO .BDW

Item 2 Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. By Mechanical Means SSR 2022-23 P.No.22/2.18

Item 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading I (Using Screening Type B (11.2 mm) Aggregate)

Item 4 Providing and constructing 75mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40mm.stone meta layers 30% crusher broken metal+70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @2Kg/sqm, spreading 12mm.size chips compacting with three wheel static roller having weight 8to10MT.to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete.Including picking of existing WBM surface. SSR P.No.30/3.37

Item 5 Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kg/10 sqm.VG-30 bulk bitumen SSR 2022-23 PNO/INO 29/3.30

Item 6 Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction VG-30 Bitumen, including providing and laying seal coat sealing voids in a bituminious surface laid to the specified level and cross fall using Type A seal coat but excluding prime/tack coat. For Bitumen VG-30 bulk--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller SSR 2022-23 /PNO/INO 36/4.08

Item 7 Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) SSR 4.01 MORTH 513

Item 8 Supplying hard murum/ kankar at the road site, including conveying and stacking complete. SSR 2022-23 P.No. 23/2.29

Item 9 Spreading hard murum for side width complete Spec. No.: MORTH 408 SSR 2022-23 P.No. 23/2.30

Item 10 Providing and fixing Information Sign Board of Size 0.90 X 0.60m. Prepared on 16 gauge M.S. Sheet with Horizontal bracing of M.S. Flat on size 25 X 6 mm including Painting with One Coat Zinc Chrome primer and Two coats oil painting including two number of M.S. angle Iron Post of Size 50 X 50 X 6 mm of 2.70 m lomg including Conveying all taxes fixing in Ground with cement concrete 1:4:8 block of 45 X 45 X 45 cm size as directed by Engineer in charge etc. complete. R.A.