CA NO GE/C-65/2020-21 REPAIRS TO COMPOUND WALL FENCING PATH DRAINAGE SYSTEMS AND CERTAIN CONNECTED WORKS TO CERTAIN BLDGS AT SIGNAL ENCLAVE APS COLONY UNDER GE (CENTRAL) DELHI CANTT-10

Amount

Demolition of brick work built in cement mortar in any description and position, complete all as specified and directed by Engineer-in-Chage.

Taking down cement Plaster of any thickness from brick or stone walls and concrete etc including raking out joints, jacking for key, scrubbing down with water etc including removal of rubbish outside Defence land, complete all as specified and directed by Engineer-in-Chage.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and directed by Engineer-in-Chage.

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:4, complete all as specified and directed by Engineer-in-Chage.

All as per item no 3 before but except bricks complete all as specified and directed by Engineer-in-Chage.

M & L for rendering 15mm thick in cement plaster 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge

Raking out joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels,, etc. complete all as specified and directed by Engineer-in-Chage.

All as above item No 7 to brick work or brick tiles, laid flat, in floors, surface channels, roofs, etc complete all as specified and directed by Engineer-in-Chage..

M & L for Flush pointing in CM 1:4 to brick on edge pavings/drains/roofs etc complete all as specified and directed by Engineer-in-Chage.

M & L for 100mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in hard standing finished, surface even and fair with out using extra cement, LAID IN ALTERNATE BAYS including demolition of existing flooring all as specified and disposing to debries etc.complete all as specified and directed by Engineer-in-Chage.

M&L cement concrete 1:2:4 type B1 using 20mm graded aggregate in surface channels and drains etc including demolition of existing all as specified and disposing to debries etc.complete all as specified and directed by Engineer-in-Chage.

M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified and directed by Engineer-in-Chage.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc complete all as specified and directed by Engineer-in-Chage.

Supply and fixed pre-cast concrete blocks for kerb stone with solid block exc 10 cm in width type C-1 , 1:3:6 ( using 20 mm graded stone aggregate) set in CM 1:6 of any shape and size as approved by Garrison Engineer, including necessary excavation and earth work including returning filling in the earth and removal of surplus earth from site if any, kerb stone shall be fixed in true line and level or in curves for edging of road side path including embedding PCC pre cast block in ground to any depths as required and tamping soil around PCC bloacks complete all as directed at site incl two coat of enamel paint over a coat of primer of kerb stone blocks complete all as specified and directed by Engineer-in-Chage.

S&Fin repairs Framed work as in Fencing Posts, Swan necks, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of fencing wire or other covering. etc. also fastening and fixing complete incl cleats, brackets, complete of Fe 410-W (Gde e-250) quality B complete all as specified and directed by Engineer-in-Chage.

S & F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts,including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed by Engineer-in-Chage.

M&L for Preparation of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Chage.

M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment including 25mm thick sand cushoining complete all as specified and directed by Engineer-in-Chage.

M & L for preparation of newly plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of white wash complete all as specified and directed by Engineer-in-Chage.

M& L for cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection 75 mm thick laid in bays and surfaces finished even and fair, including filling the joints with bitumen mastic including demolition of existing surface all as specified and disposing to debries etc all as directed by Engr-in-Charge.

M & L for preparation of old plastered or unplastered surfaces of wall and applying two coats of cement base paint including complete removal of old treatment complete all as specified and directed by Engineer-in-Chage.

M&L Cement concrete 1:4:8 type D2 using 40mm graded aggregate as in foundations, filling and mass-concrete all as specified and directed by Engr-in-Charge.

Excavation in trenches not exc 1.5m in depth and not exc 1.5m wide in soft/loose soil as in desilting of open drain and removing excavated soil and ,spreading in low laying area all as directed by Engr-in-charge.

Returning, filling in, including spreding, levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil complete all as specified and directed by Engineer-in-Chage..

Removing excavated meterial n exc 50m and depositing where directed at a level n exc 1.5m above the starting point in soil complete all as specified and directed by Engineer-in-Chage..

M&L for Preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide primer, complete all as specified and directed by Engineer-in-Chage.

S & F in repairs 100mm dia sand cast Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls/floors/trenches etc complete all as specified and directed by Engineer-in-Chage.

S & F in repairs 75mm dia sand cast Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls/floors/trenches etc complete all as specified and directed by Engineer-in-Chage.

S & F in repairs Cast iron Bends/Tees of 100mm dia (any radius), diminishing pieces or tapers (larger bore measured) etc complete all as specified and directed by Engineer-in-Chage.

S & F in repairs cast iron Bends/Tees of 75mm dia (any radius), diminishing pieces or tapers (larger bore measured) etc complete all as specified and directed by Engineer-in-Chage.

M&L for preparing of old decorated surfaces of wall (plastered or unplastered) by mechanical grinder, scrapping down smoke soot, moulds, moss, efflorescence and treating oily or greasy spots incl removal of nails, stickers etc and filling nails holes, crackes, uneven surfaces and applying two coats of weather coat over a coat of 2 to 3mm thick wall care putty complete on walls complete all as specified and directed by Engineer-in-Chage.

S&F in repair of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints with necessary bends/tees/sockets etc fixed complete to walls, ceilings or in floors with suitable clamps/bracket including taking down old PVC/CI pipes and necessary cutting through RCC roof and brick work etc (above six storey height) and making good complete all as specified and directed by Engineer-in-Chage..

M&L 75mm thick PCC (1:4:8) Type D2 (using 40mm graded crushed stone aggregate) as in sub floor complete all as specified and directed by Engineer-in-Chage.

M&L Granite of 18 to 20mm thick with uniform texture (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing with white cement (1:2) using marble dust with admixture of pigment to match with marble shade of makrana doogri green colour stone for Kitchen cooking platform laid over and including 15mm thick screed bed in cement mortar (1:6) polishing bevelled edges of corner etc complete all as specified and directed.

M & L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. tobe prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails andguides) and hanging; also fastening and fixing complete including dismentalling of old rusted gates and two coats of synthetic enamal paint over a coat of redoxide primer complete all as specified and directed by Engineer-in-Chage.

M & L for rendering 15mm thick in cement plaster 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge

Note :- Total amount of Sch of credit is Rs. 191750.00 as per Sch of credit. Net contract sum shall be total quoted amount of bidder (-) amount of Sch of credit.

GIAN ENGINEERS

R S ENTERPRISES

M/s Durga Traders

SHREE RAM BUILD TECH