Development of parks in Sector 18, Kaithal.(Providing and fixing of open Air Gym,Children Playing equipments,Garden benches,dustbins etc in park near H. No 814-P and 1339-P in Sector-18 kaithal with three year mtc and defect liability period free of

[26.58.1]Supply and installation of garden bench 1. Chair type garden bench with L-shaped sides made of reinforced concrete (M30), thickness 100 mm, overall height 1000 mm, base width 620 mm. Back and seat shall consist of 5 Nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation. All materials required to be as per BIS specifications. [Through Rate]

[26.76]Providing and fixing pair of Plastic dustbins 100 litre volume each, of two different colours, for dry and wet waste, made of virgin plastic to be mounted on MS rectangular hollow section 50 x 25 x 3 mm frames pivoted on 3 MS square hollow section verticals, 1 m above ground, one 35 cm RHS welded to each vertical member at base and grouted in 180 x 40 x 30 cm 1:2:4 cement concrete. [Through Rate]

Providing desiging and fixing of Double Air Cross Walker of size 1600 x 600x 1600 mm fabricated with main post of 140mm dia and 300 mm thick and other pipes of 40mm dia 300mm thick made up of MS and fully painted with drawing 18/0 Asian paint complete in all respect upto satisfaction of Engineer in charge.

Providing desiging and fixing of Elliptical exerciser (Double) of size 2200 x 500 x 2000 mm fabricated with post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3. 00mm thick made up of MS and fully painted with drawing Asian paint complete in all respect upto satisfaction of Engineer in charge.

Providing desiging and fixing of Arm Wheel of size 850 x 800 x 1800 mm fabricated with main post of 140mm dia and 3.00 mm thickness and other pipes of 40mm dia 3.00 mm thick made up of MS and fully painted with fast drawing Asian paint and complete in all respect upto satisfaction of Engineer in charge.

Providing desiging and fixing of Tripal Twister of size 1700 x 1300 x 1300 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick made up of MS and fully painted with fast drying Asian paint complete in all respect upto satisfaction of Engineer in charge.

Providing desiging and fixing of Chinup and Dipping Bar is a unique combination hanging, chinning, dipping, stretching and muscular exerciser. It`s useful for teenage and young children`s. Main vertical pipe 140mm dia and 3.00 mm thick and other pipes of 40mm dia and 3.00 mm thick etc complete in all respect upto satisfaction of Engineer in charge.

Providing desiging and fixing of Pull chair of size 1900 x 1450 x 1600 mm fabricated with main post of 140mm dia etc complete in all respect upto satisfaction of Engineer in charge.

Providing desiging and fixing of Leg Press open air gym machine complete in all respect upto satisfaction of Engineer in charge.

Providing desiging and fixing of Chest Press open air gym machine complete in all respect upto satisfaction of Engineer in charge.

Providing desiging and fixing of Horse Rider Station open air gym machine complete in all respect upto satisfaction of Engineer in charge.

Providing desiging and fixing of Air Swinger open air gym machine complete in all respect upto satisfaction of Engineer in charge.

P and F chain swing of size 10` long x 9` high above ground frame is made of M.S. Pipe 2` B class which stay with M.S. pipe 1`B class frame is connected with M.S. rod 25mm dia shaft having fabricated ball bearing no. 3204 shaft, further having 2 Nos. seating belt type seat selded with 8mm thick M.S. complete with painting and fixed in cement concrete block of size 12`x12`x15` into 4 legs in mixing of ratio 1:2:4 complete in all respect of entire satisfaction of engineer-in-charge.

P and F of slide 12` long x 16` wide x 5` high above ground slide is made of S.S. sheet 18 SWG mounted on M.S. angle 40 x 40 x 4 mm slide 2 nos. vertical support of M.S. pipe 1` B class ladder having climbing steps of pipe 1/2 B class complete with painting and to be fixed in CC blocks 12` x 12` x 15` in to 4 legs of mix in ratio 1:2:4.

P and F of setter sea-saw frame made of 2` Dia MS Pipe 5` long and 1`6` height of ground level with 4 nos. of sea saw plunks with 1½” MS Pipe 8` long sheet made with 16 guage painted with 1st quality paint and fixing with concrete block 1:2:4 ratio.

P and F of Bridge Ladder high frame is of MS Pipe 2` x 12 gage. Top hanging side pipe of MS Pipe 2` x 12 gage and its climbing and center handles is of MS Pipe 3/4` x 12 gage with priming and enamel spray painting in multicolour.

P and F of Merry GO round in position MGR platform made of 1.5` MS pipe with floor of 16 gage MS sheet. Handrail 30` height made of MS pipe 1` with priming and enamel spray painting in multicolour.