CERTAIN MISC REPAIRS TO BSO YARD and OFFICE, PUMP HOUSE AND AGE B/R-III AT KHOJATOLI MIL STN UNDER GE RANCHI

Amount

Dismantling of corrugated or semi corrugated asbestos cement sheets in roof coverings complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping complete all as specified and directed

Dismantlingtimber scantlings 40 Sq.cm and over in section unframed work in any position complete all as specified and directed.

Dismantling timber scantling under 40 Sq.cm in fillets, rails, posts, rafters, purlins etc complete all as specified and directed.

Dismantling of timber boarding any description, fixed in any position with nails complete all as specified and directed

S&F for structural steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Supply and fix 2nd class hard wood boarding fixed with nails in eaves board planned one side with butt joint, 20mm thick complete all as specified and directed.

Dismantling wall and ceiling boards(fibre, pulp, insulation etc or insulation boards/slabs/blankets of any description including cover fillets complete all as specified and directed.

Material and labour for 4mm thick non asbestos cement plain building boards, fixed or laid / inserted to timber/GI/Aluminium frame work with screws as in ceiling, flat or sloping complete all as specified and directed.

S & F powder coated (minimum thickness of powder coating 50 micron) aluminium snap grid of size 605 X 605 mm framework for false ceiling with and including provision of 4 mm dia GI wire of suitable length as required at site up to roof members complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.

M & L for providing plain cement concrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

Material and labour for 75mm thick plain cement concrete 1:3:6 type C-2 ( using 40mm graded stone crushed aggregate) finished even and smooth using extra cement as in plinth protection complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block 60mm thick with grey cement and pigment any shape and size confirming to IS 15658-2006 of M-35 grade complete all as specified and directed

M&L Sand filling under floors or in foundations including watering and consolidation

PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in roof kerbs, benches and water troughs etc. including necessary moulding complete all as specified & directed.

M&L PCC 1:4:8 type D-2 (40 mm graded crushed stone aggr ) as in foundation, filling and mass concrete.

Material and labour for preparation of wood or wood based material new or old of any description and girth not otherwise described and treating with two coats of creosote oil complete all as specified and direced.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and removing rubbish off the premises complete all as specified and directed.

M & L for 20-25 mm thick machine cut Kota stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M & L for 20-25 mm thick machine cut Kota stone slab as in risers of steps, skirting, dado and pillar over cement screed bed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

S&F Dark shade/ Double charged/ ultracharged Vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 but not exceeding 1.00 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:4)

Material and labour for non skid joints free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed with white or coloured cement to match over 15mm thick screed in CM(1:4) complete all as specified and directed.

Material and labour for glazed ceramic joints free coloured tiles 350 x 250 x 7 mm 450 x 350 x 7mm thick on vertical surfaces such as skirting, dados, etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match,over 10mm thick in cement mortar (1:4), complete all as specified and directed.

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per item No. 27 above but except bricks.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) n.exc 1.50 Sqm each including iron mongeries complete all as specified and directed.

All as per item No. 29 above but exc. 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and directed.

S & F of 1.25 mm thick pressed steel frame of size 165 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed.

Supply and fix 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads, for securing glass/gauze etc size of member of shutter as specified in SSR Part I, section 8, clause No 8.24(a), complete all as specified and directed.

Material and labour for 35 mm thick plain, 2nd class hard wood, framed, panelled shutter (any no. of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed

Supply and fix MS flat iron 25 x 3mm as in hold fast complete conforming Fe-290 Gde-165 complete all as specified and directed

Supply and fix MS butt hinges medium weight, cold rolled 100mm size, complete all as specified and directed.

S&F Powder Coating Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed

S&F Powder Coating Anodised aluminium shutters two/three track for windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed

S & F of mild steel work in chimney bars (straight or camber) bearing bars tongues or water bars for window frames, window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc and similar articles conforming to Fe – 290 Grade – E 165 complete all as specified and directed.

Supply and fix galvanised MS wire mesh, 0.63mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Supply & fix sheet glass 3mm thick ordinary quality and glazing with oil putty in squares exc 0.50 Sqm in each pane, complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-1 (using 20mm graded stone crushed aggregate) as in surface channel and drain including necessary form work including demolition of existing old channels, complete all as specified and directed.

Extra for forming fair finished drain or channel not exc 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed (Inner girth only to be measured)

Taking down cement plaster on brick or stone walls, etc., including racking out joints, hacking for key scrubbing down with water etc, complete all as specified and directed

Material and labour for 15mm thick rendering in cement mortar (1:4) on fair face of brick work or on concrete surfaces and finishing the surface fair and even by mixing WPC in the outer coat as per manufacturers instruction, complete all as specified and directed. (Note: WPC shall be measured and paid for under separate items)

Supply only liquie water proofing compound as per manufacture instruction.

Material and labour for 10mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered wall and applying 3 mm thick one or more coat of "Birla White wall care putty"or" JK Wall Care Putty "to make the entire surface smooth and applying two coats of acrylic distemper of any shade on walls surfaces over a coat of alkali resistant primer free from undulations, complete all as specified and directed.

M&L complete removal of existing treatment of old plastered surface of wall and applying 3 mm thick one or more coat of "Birla White wall care putty"or" JK Wall Care Putty "to make the entire surface smooth and applying two coats of acrylic distemper of any shade on walls surfaces over a coat of alkali resistant primer free from undulations, complete all as specified and directed

M&L for preparation of new plastered of external surface of walls and applying two coats of weather proof paint(exterior grade) over a coat of wall putty 2 mm thick on cement surface over a coat of primer including preparation of surface,complete all as specified and directed.

Material and labour for complete removal of existing treatment from external surface of walls and applying two coats of weather proof paint(exterior grade) over a coat of wall putty 2 mm thick on cement surface over a coat of primer including preparation of surface,complete all as specified and directed.

S & F in repairs coloured Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed. CAT NO :- 4018 of Prayag and equivalent of approved make.

Supply and fix in repairs coloured vitreous china wash hand basin with pedestal, of size 565 x 430x845 mm excluding tap but including waste coupling, wash pipe, PVC connection pipe, CI brackets, complete all as specified and directed. Make :- CAT NO :- 4603 of Prayag and equivalent of approved.

S & F in repairs coloured vitreous China half stall type coloured urinal size 345x320x560 mm (excluding flushing cistern, flush pipe and waste pipe) but including connections to flushing pipe and out going pipes etc including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including fixing brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed. CAT NO :- 4998 of Prayag and equivalent of approved make.

Supply and fixed in repair CP health faucet 1.00 mtr tube and hook 15mm bore with complete accessories. CAT NO :- BEA-81 of Prayag and equivalent of approved make.

Supply and fixed in repair CP jet speay(butterfly) with 1.5 mtr tube with complete accessories. CAT NO :- BEA-17 of Prayag and equivalent of approved make.

Supply and fixed in repair whilte/colour PVC Cabinet mirror 350x450 mm size, complete all as specified and directed. CAT NO :- 557 of Prayag and equivalent of approved make.

Supply and fix in repairs glass shelf 500 mm size, complete all as specified and directed. CAT NO :- BEA-51 of Prayag and equivalent of approved make.

Supply and fix in repairs full corner glass shelf, complete all as specified and directed. CAT NO :- BEA-51 of Prayag and equivalent of approved make.

Supply and fix in repairs CP towel rail 600 mm long, complete all as specified and directed. CAT NO :- BEA-20 of Prayag and equivalent of approved make.

Supply and fix in repairs CP soap dish with glass, complete all as specified and directed. CAT NO :- BA-15G of Prayag and equivalent of approved make.

S & F of PVC low level white flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle etc and S & F of 32 mm dia PVC flush pipe of suitable length and making all connection and making good disturbed surface, complete all as specified and directed. Make : Hindware,Prayag and equivalent of approved make.

Supply and fix PVC connections fancy type 15mm size with PTMT nuts of length of 600mm, complete all as specified and directed Make : INDIA PRAYAG/POLYTUF

S&F Brass CP toilet paper holder fixed to wall with plugs and brass chromium plated screws. Make :- Cat No. BA-88 Prayag or equivelent as approved.

S & F Chromium plated Pillar tap swan Nack for wash hand basin of copper alloy with long shank inlets suitable for 15mm bore connections, complete all as specified and directed. Make - Cat No. 8414(PICASSO) Prayag or equivalent as approved.

Supply and fix CP stop cock/ angular stop cock 15mm bore with wall flange, complete all as specified and directed.

S & F of 15 mm bore fancy type bib tap long body with flange, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make - BA-15G of prayag or equivalent as approved.

M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

Taking up or steel tubing & connections including cleaning for refixing bore of pipe 15mm etc, complete all as specified and directed

S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 15mm bore etc, complete all as specified and directed

Refixing old galvanised steel tubes & connections on wall 15 mm bore, complete all as specified and directed .

Taking up or steel tubing & connections including cleaning for refixing bore of pipe 20mm etc, complete all as specified and directed

S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 20mm bore etc complete all as specified and directed

Refixing old galvanised steel tubes & connections on wall 20 mm bore, complete all as specified and directed .

S & F of 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and directed.

Supply and fix 110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring jointsfixed to wall or floors including clamps for screwing pipe,complete all as specified and directed .

All as per item No. 76 above but 75mm bore

Supply and fix 110mm bore PVC (SWR) bends any radius with access door, complete all as specified and directed.

S & F of 150 mm long extruded anodized aluminium alloy handle, fabricated type, complete all as specified and directed.

S & F of 150 mm long aluminium anodized barrel tower bolt of extruded section, complete all as specified and directed.

S & F of 300 mm long mild steel sliding door bolt, bolt type, stove coustic black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, complete all as specified and directed.

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified & directed.

M & L for providing pre-cast cement concrete landing, cover slabs, chullah hoods, chajjas, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:6, complete all as specified and directed.

Mild steel TMT bars 10 mm dia and over as in reinforcement, cut to length, bent to shape required, incl cranking bending spirally for hooping for columns and binding with MS wire (annealed) not less than 0.9 mm dia or securing with clips.

M&L for mild steel 6 - 8mm dia TMT bars bent to shape required, including cranking, bending and binding with mild steel annealed wire not less than 0.9mm dia, complete all as specified and directed.

M/S JAI MATA DEE CONTRUCTION CO.

M/S ABDHESH CONSTRUCTION

M/s Dwarika Nath Singh

Raj Construction

M/S Sahib N Sahiba Enterprises

jai maavindwashni sales & supply

india trading company