Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹8.3 L
Closing Date
28 Dec 2020, 1:00 pmClosed
Chief Executive Officer
Delhi Cantonment Board, Delhi Cantt.
Term contract for repair or improvements to path or pavements etc with Ready Mix Concrete in Delhi Cantonment.
2020_DGDE_600515_1
DCB/8/C-16/2020-21
Open Tender
Civil Works
365 days
Delhi Cantt.
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,000
Chief Executive Officer, Delhi Cantonment Board
₹8.3 L
18 Jan 2021
3 Dec 2020
29 Dec 2020
3 Dec 2020
28 Dec 2020
3 Dec 2020
3 Dec 2020 - 28 Dec 2020
Amount
Demolition of cement concrete of any description and in any position not otherwise specifically provided for
Dismantling of brick work or stone/boulder masonery, built in any cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facing, dressed stone work and precast concrete articles.
Excavation over areas, not exceeding 1.5 mt deep and getting out in any type of soil/ soft disintegrated rocks.
Demolition of chequered tiles, cement concrete tiles or like of any description laid in any position all as directed by Engineer-in-charge
Excavation in trenches, not exceeding 1.5 mt wide and not exceeding 1.5 mt in depth; for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqmt on plan and not exceeding 1.5 mt in depth and getting out in any type of soil/ soft disintegrated rocks
M/L surface dressing n.exc. 15 cm deep all as specified/ directed by the Engineer-in-charge
Returning, filling in earth, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick.
M&L Autoclaved Areated Cement blocks masonary with AAC blocks of any thickness in superstructure, above plinth level, in cement mortar 1:4 (1 cement : 4 coarse sand) including providing and placing in position 2 nos 8 mm dia M.S bars at every third course of masonry work. (MS bars shall be paid separately) complete all as directed by Engineer-in-charge
M&L, Granite stone pre-polished slab Machine cut(of any shade / colour/texture) 18 mm thick machine cut, in flooring, stair case, counters, dado/treads/ risers of steps & like laid over screed bed of minimum 20 mm thick in cement mortar 1:4 (1 grey cement : 4 coarse sand) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, nothing extra shall be applicable for narrow width of stone work.
Mild steel TMT bars( FE 500) 8 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips including stirrups, spacers and binders.
M/L, Rendering 15 mm thick cement plaster in 1 : 4 cement mortar(1 Cement : 4 Coarse sand) over external surfaces on brick wall and concrete surfaces and finishing surface even and smooth without using extra cement.
M/L, Rendering 15 mm thick cement plaster in 1:4 cement mortar(1 cement:4 coarse sand) on brick walls or concrete surfaces and render is to be finished even and smooth with floating coat of neat cement.
Supplying and stacking of good earth at site including royalty and carriage complete (earth measured in stacks will be reduced by 20% for payment) for filling and general horticulture purposes.
Earth filling and spreading by mixing water so as to have earth mixed with optimum quantity of water to achieve 95% compaction using plate vibrator machine complete all as directed by Engineer-in-charge.
Providing & laying in position Ready Mix Cement concrete M-10, grade, machine batched, machine mixed, Design Mix Concrete (excluding the cost of centering and shuttering,) placing in position, Mechanical vibrated using Needle Vibrator & finally finishing & Compacting the surface with Surface Vibrators and finished including addition of admixtures in recommended portions (as per IS-9103) to accelerate/retard setting of concrete to improve workability without tampering strength and durability laid to required slope and camber in panels as directed in accordance with IS 456-2000,transported to the site of work from approved RMC plant.
Providing & laying in position Ready Mix Cement concrete M-25, grade, machine batched, machine mixed, Design Mix Concrete (excluding the cost of centering and shuttering,) placing in position, Mechanical vibrated using Needle Vibrator & finally finishing & Compacting the surface with Surface Vibrators and finished including addition of admixtures in recommended portions (as per IS-9103) to accelerate/retard setting of concrete to improve workability without tampering strength and durability laid to required slope and camber in panels as directed in accordance with IS 456-2000,transported to the site of work from approved RMC plant.
Providing & laying in position Ready Mix Cement concrete M-35, grade, machine batched, machine mixed, Design Mix Concrete (excluding the cost of centering and shuttering,) placing in position, Mechanical vibrated using Needle Vibrator & finally finishing & Compacting the surface with Surface Vibrators and finished including addition of admixtures in recommended portions (as per IS-9103) to accelerate/retard setting of concrete to improve workability without tampering strength and durability laid to required slope and camber in panels as directed in accordance with IS 456-2000,transported to the site of work from approved RMC plant.
Providing and fixing at or near the ground level, Factory made Vibro compacted Pre cast Cement Concrete Kerb stone of Design Mix M-25 grade, size of kerb stone 200mm length, 200mm height, bottom width 130 mm and Top width 80mm as directed by Engineer-in-charge. Kerb stone should be manufactured in joint less moulds on vibration compaction table and finished smooth as per required shape size and pattern and setting in position, in cement mortar 1:4 ( 1 cement 4 coarse sand ) jointing and pointing with cement mortar 1:2 (1 cement :2 fine sand ) including making drainage opening where ever required complete as per direction of Engineer-in-Charge. APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Kreative Concrete Company, UP Concrete products.
Providing and fixing at or near the ground level, Factory made Pre cast Cement Concrete Kerb stone of Design Mix M-25 grade, size of kerb stone 900mm or 600 mm length, 300mm height, bottom width 125 mm and Top width 80mm as per typical design as directed by Engineer-in-charge. Kerb stone should be manufactured in joint less moulds on vibration compaction table and finished smooth as per required shape size and pattern and setting in position, in cement mortar 1:4 ( 1 cement 4 coarse sand ) jointing and pointing with cement mortar 1:2 (1 cement :2 fine sand ) including making drainage opening where ever required complete as per direction of Engineer-in-Charge. APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Kreative Concrete Company, UP Concrete products.
Dismantling existing interlocking paver blocks of 60 mm thickness complete as specified/directed by Engineer-in-charge.
Refixing of dismantled 60 mm thick interlocking paver blocks at indicated locations as per design/ pattern provided by Engineer-in-Charge, laid over a base of 30 mm (average) thick Jamuna sand and joints filled with fine sand and finally compaction of bedding sand and blocks laid over it, with vibratory plate compactors, till the top of each paving block is in level with its adjacent blocks complete as per directions of Engineer-in-Charge.
Providing and fixing 60mm thick, C&D waste recycled interlocking paver blocks of approved shape / pattern as directed by the Engineer-in-Charge, 60 mm thick, made out of C&D waste at C&D waste recycling plant established by East Delhi Municipal Corporation or other similar agencies/ Municipal Corporations as approved by the Engineer-in-Charge. Interlocking paver blocks shall be purchased by the contractor as applicable rates fixed by such units. Interlocking paver blocks be fixed and provided at site at indicated locations in a pattern approved / directed by Engineer-in-Charge, laid over a base of 30 mm (average) thick Jamuna sand and joints filled with fine sand and finally compaction of bedding sand and blocks laid over it, with vibratory plate compactors, till the top of each paving block is in level with its adjacent blocks complete as per directions of Engineer-in-Charge.
Material/ labour, extra charges for providing factory made 100 mm thick cement concrete prefab C&D waste recycled interlocking coloured paver blocks of any colour, shape and pattern made out of C&D waste at C&D waste recycling plant established by East Delhi Municipal Corporation or other similar agencies/ Municipal Corporations as approved by the Engineer-in-Charge, in lieu of 60 mm thick interlocking paver blocks, having average comprehensive strengthen of 4000 kg/cm2 with grey cement and pigment manufactured in jointless moulds on vibration table, laid over a base of 30 mm thick (average) Jamuna Sand and joints filled with fine sand and finally compaction of bedding sand and laid over it with vibratory plate compactors till the top of each paving blocks is in level will adjacent blocks laid in designs and patterns complete as per directions of Engineer-in-Charge. APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Unistone Products (I) Pvt. Ltd., Kreative Concrete Company, UP Concrete products.
Supplying of ISI marked Pre cast SFRC slab of any size, 70 mm thick using M-25 concrete and as per as per IS. APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Kreative Concrete Company, UP Concrete products.
Supplying of ISI marked Pre cast SFRC slab of any size, 100 mm thick (heavy duty) using M-35 concrete and as per as per IS. APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Unistone Products (I) Pvt. Ltd., Kreative Concrete Company, UP Concrete products.
Providing and fixing Precast Polymer Saucer drain of size and shape as indicated by Engineer-in-charge for surface drainage, fixed, laid over 20mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) and pointing with 1 : 2 cement mortar (1 cement : 2 find sand) laid to slopes complete as directed by Engineer-in-charge. Size of Precast drain 900 mm length , width 300 mm and thickness 100 mm, manufactured with Design Mix M-35 using Vibro technology complete. APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Kreative Concrete Company, UP Concrete products.
Supplying of SFRC Manhole covers & frames conforming to IS – 12592 (Part I) using M-35 concrete having clear opening of 560 mm dia as per details below:
(a) Heavy Duty: . Over all Total Size in height mm mm Frame Details 875 155 Cover Details 720 80 APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Kreative Concrete Company, UP Concrete products.
(b) Medium Duty: . Over all Total Size in height mm mm Frame Detials 770 110 Cover Details 670 60 APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Kreative Concrete Company, UP Concrete products.
Providing and placing, machine cutting grooves, 10mm wide and 60mm deep in concrete surfaces for construction/ contraction joints and longitudinal joints, providing joint sealant compound of cold polysulphide in the groove after widening the groove to required width, cleaning the groove with air compressor, insertion of debonding strip, as per MORTH specifications Clause 602
Material & Labour framed work such as grill, gratings etc. with ends of bars shouldered and/ or riveted, or forged into spikes ; framed guard bars ; barred iron doors ; ladders ; framed balusters ; walk ways ; railings and like confirming to Fe.290.Gde–E-165
Material & Labour brick work with good quality SEWER BRICKS CONFIRMING TO IS:4885-1988 having compressive strength not less than 16 N/mm2 built in cement mortar 1:4 (1 Cement :4 Coarse sand) complete as directed by Engineer-in-charge.
Material & Labour brick work with good quality BRICKS Class designation 100 straight or curved on plan not exc. 6 mtr mean radius built in cement mortar 1:4 (1 Cement :4 Coarse sand) complete as directed by Engineer-in-charge.
Providing cement concrete Type A-1 1:1½:3 (1 cement : 1½ Coarse Sand : 3, 20 mm gr. Coarse aggregate) in coping on walls, plinth courses, kneelers surface channel & drains as directed
Bidder Name
Amount
SBG Infracon Pvt. Ltd.(GSTN-07AAOCS8224P1ZJ)
sn malhotra and sons(GSTN-07AABFS6724N1ZT)
D B Infratech(GSTN-27AAHFD4153G1ZK)
PUJA CONSTRUCTION COMPANY(GSTN-07AARFP6755C1ZW)
AMIT ASSOCIATES(GSTN-07ACUPG0847K1Z7)
M/s. Kansal Construction Co.(GSTN-07AAQFK7850A1Z8)
omparkash(GSTN-NA)
PUJA CONSTRUCTION COMPANY
omparkash
sn malhotra and sons
AMIT ASSOCIATES
SBG Infracon Pvt. Ltd.
D B Infratech
PUJA CONSTRUCTION COMPANY
AMIT ASSOCIATES
sn malhotra and sons
omparkash
SBG Infracon Pvt. Ltd.
D B Infratech
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid