Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹9.9 L
Closing Date
16 Jan 2024, 8:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
krishna Reddy G T
Establishing 1x10MVA, 110/11 kV substation at Navadagi by constructing 110kV SC line on DC towers using Lynx Conductor from 110kV Talikoti Sub-Station to proposed 110/11kV Navadagi substation for a distance of 14.113Km along with construction of 1 No. of 110kV Terminal Bay at 110kV Talikoti substation in Talikoti taluk, Vijayapura district on Partial Turnkey basis including Supply of all matching Materials/ Equipments(excluding supply of 10MVA Transformer and 11KV Switchgear) and Erection (Including Civil Works) of all Materials/ Equipment, Testing and Commissioning.
KPTCL/2023-24/SS/WORK_INDENT385
KPTCL/2023-24/SS/WORK_INDENT385
Open
Sub-Station
Two Tender Document System(Two Cover)
KPTCL CEE Corporate Office Tendering and Procurement Bengaluru
4 documents required · 4 mandatory
Documentary proof for clause no.3.2 (b)(i) of ITT Tenderer such as P.O, LOI/LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive/ Divisional Engineer
Documentary proof for clause no.3.2 (b)(ii) of ITT Tenderer such as P.O, LOI/LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive/ Divisional Engineer
Audited Financial statements i.e Balance sheets, P&L statements, Turnover certificates and Auditors Reports of the last five years preceding the date of bid submission of the Bidder duly certified by chartered Accountant as in clause no.3.2 (a) of ITT
Bankers Certificate duly signed by authorized person in the prescribed format as at Annexure XVIII of Section-4 and as per the clause no.3.3 (b) of ITT (Liquid Assets and /or availability of credit facilities).
Documentary proof for clause no.3.6 of ITT : Assessed available tender capacity such as, Maximum value of works executed (KPTCL & Non-KPTCL) in any one year during the last five years,Value of existing commitments and on-going works as well as the stipulated period of completion, remaining for each of the works should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent OR be verified and certified by Chartered Accountant/ Cost Auditor and self declar. as in Note of the clause 3.6 of ITT in the presc.format as in clause No: 1.5 of QI.Value of existing commitments and on going works as well as the stipu. period of comp, remaining for each of the works signed by the Employer in charge i.self-declaration stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct as per the clause no.3.6 of ITT and at clause No.1.5 of Section-3-QI
Valid Super grade Electrical Contractors License issued by the Government of Karnataka as on the date of bid submission as per clause no.2.3 of ITT, failing which the offer is liable to be rejected.
Certificate of Incorporation of the Individual or any relevant document in respect of Partnership/Proprietorship firms as per the tender document as per clause no.3.10 (xi) of ITT.
Self-declarations in respect of Litigation, dis-qualification/Black listed due to non-performance & Risk & cost, Country which shares a land border with India as specified in Annexure XVI and Annexure XVII and as per clause no. 2.3 & 2.4 (b), (c), (d) & (e) of ITT.
The Qualification and experience of key Personnel proposed for carrying out the Work and Description of the Tools & Plant available with them for execution of the Work.
No Deviation Certificate as per Annexure-I of Section-4
Constitution or legal status, Place of Registration(upload copy) and Principal place of business of the Bidder written Power of Attorney to the Signatory of the Bid to commit the Bidder to the Contract along with the resolution passed in this regard by the Board of Directors / all the Partners of the Firm
Lproposed methodology and program of construction backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per approved Activity chart as per clause No.1.13 of Section-3-Qualification Information.
Certificate is to be uploaded by the Tenderer agreeing to source the equipment/material for the work from the Vendors who meet the eligibility clauses regarding restrictions on procurement from a country which shares a land border with India as per AnnexureXVI and XVII of Section-4.
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
All details as called for in the Technical specifications of all the equipments/ materials of the Tender.
Any other required documents as per the qualifying requirements, terms and conditions of the tender, NIT & Technical specifications.
Please note that the Filled in Techno commercial sheet shall be uploaded along with all other QR documents. Offers shall be quoted in the item-wise bid Financial offer, provisioned in the e-procurement portal. In case the Prices are uploaded in/along the Techno commercial Bid, then Bid will be summarily rejected. The Techno-commercial sheets shall be uploaded in KPTCL excel formats only.
Power of Attorney in favor of all the persons signing the documents as in Annexure-XI and Letter of Undertaking as per Annexure-V of Section-4.
GST registration, PAN etc., of the Tenderer as per clause no.3.10 (xii) of ITT .
The Tenderer shall upload declarations for Deviations, if any as per Schedule-5 and Schedule-6 of the Techno Commercial sheets.
Information on litigations in which the Tenderer is involved as per prescribed format as at 1.12 of Qualification Information.
undertaking to source the supply of equipment/material from KPTCL approved Vendors only as per the QR for Vendor registration, available in the KPTCL website i.e., https//kptcl.karnataka.gov.in, Link Tendering & Procurement application for Vendor registration etc as per Annexure -XIV of Section-4.
The Tenderer shall upload Type test reports as per tender documents/technical specifications
₹5,000
₹9.9 L
27 Dec 2023
27 Dec 2023
17 Jan 2024
27 Dec 2023
27 Dec 2023
Substation supply Template
Supply and fixing of 2 Nos. of 50 X 8 mm copper flats from Neutral Terminal to the Earthmat through NCT along with necessary Support Pin Insulators.
Supply, Erection & Commissioning of Nitrogen Injection Fire Extinguishing System for Power Transformer
Circuit Breaker :SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting arrangements, rigid bi-metallic terminal connector complete sui...
b) For 110kV Line without capacitive trip device
Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators:
A)110KV, 1250A, 40KA Class Dou...
b) Upright mounting type without earth switch with live point height 6350 mm. Terminal connector with 63 mm /75 mm AI pipe/ Drake ACSR Note:i)Flexible type terminal connector suitable for 63mm Alumini...
ii) 11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for Coyote ACSR for capacitor bank.
iii) 11KV isolators, Single break 400A, 25KA capacity with Roaster switch, with rigid bi-metallic terminal connectors suitable for Coyote ACSR.
Current Transformer : Current Transformer including Marshalling box, Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR.i) 110 KV Class, 31.5 KA,...
Current Transformer : Current Transformer including Marshalling box, Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR. ii)110 KV Class, 31.5 KA,...
iii) 11 KV Class, 25KA,NCT of ratio 1200-800/1-1A for REFR Protection. (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos. of 50x8mm Copper ...
Voltage Transformer: (a)Voltage Transformer 110kV, Single Phase, Oil filled outdoor type including marshalling box with rigid bimetallic terminal connectors suitable for drake ACSR as per technical s...
Lightning Arrestor:Surge arrestors (Porcelain housing) Metal Oxide Gap less type as per technical specification with suitable rigid bi-metallic terminal connectors suitable for Drake ACSR.i) 96 KV, ...
ii) 9 KV, 10KA with connector and clamps
Capacitor Bank : Design, Engineering , supply, erection, testing & commissioning of 2.9 MVAR,12.1KV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors, with suitable ...
Control Panels :Simplex Type Control and Relay Panel complete as per specifications (Control Voltage 110 V DC). NOTE :1) All the C&R panels and associated panels shall be of one and same make for unif...
b) 110 kV Line Panel
iii) Supplying of D.P. Structure with all accessories using 9.5mtrs long, 300Kg WL RCC poles for mounting 11kV 400A Roaster Isolators and 9KV, 10kA surge arrestor (3 No.) complete set.
BUS BAR FORMATION:
Rigid Bus with taps & clamps
Aluminium Tube Conforming to 6340 WP of IS-5082/1969 (BS1600 - Sch. 40) of 75 mm size-110kV side main Bus:
Aluminium Tube Conforming to 6340 WP of IS-5082/1969 (BS1600 - Sch. 40) of 63mm size for connecting equipment to equipment -110kV side
Straight taps made of 63 mm Aluminium Tube (BS-1600) of 1750 mm vertical height for vertical portion and cross bus on 110 kV side with rounded off end.
Post insulator Clamp suitable for 75 mm Aluminium pipe and post insulators Solid core type 110kV side
b) Expansion Type
c) Sliding Type
Corona Bell Suitable for Aluminium pipe of 75mm Size on 110kV side (BS 1600)
End Cap suitable for AI pipe of size 63mm on 110kV side
Post insulators solid core 110 KV Class, 1 Unit/stack
C Type Wedge Connector suitable for Drake - Drake (110kV Bus PI & 11kV Incomer)
C Type Wedge Connector suitable for Lynx - Drake (110kV line side)
Post insulator clamp suitable for Single Drake ACSR and 110kV Solid Core Insulator.
Auxiliary Transformer:
Station Auxiliary Transformer with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn11, off load tap changer (with 5 taps) with step voltage of 2.5%, as per specif...
Supply of Double pole structure with 9.5Mtrs RCC poles and with 11KV, 400A double break isolators, H-Frame and 9KV, 10KA surge arrestors (3 Nos), auxiliary transformer including materials such as DP...
LTAC panel (indoor): 415 V as per technical specification comprising of voltmeter and ammeter,1 I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU,+ 2 nos. 3 Phase 32A O/G SFU 100A + 14 O/G
SFU, 6 nos. 3 Phas...
B)AC Distribution Box Single front (Outdoor type) 6 Terminal, one I/C of 100A MCCB 20kA + 6 O/G MCB 16A + 1 O/G of 100A, HRC fuse, complete as per technical specification.
LT Power armoured UG cable as per specification.a) 1.1 KV, 4 X 95 Sqmm Aluminium, cable with glands/lugs/ferrules
b) 1.1 KV, 4 X 25 Sqmm Copper, cable with glands/lugs/ferrules
b) 1.1 KV, 4 X 10 Sqmm Copper, cable with glands/lugs/ferrules
Station Battery:
110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type) consists of 55 Nos. of cells with accessories as per specification.
Station Battery charger: Battery charger suitable for 110V, 200AH, Battery set (Plante/Grid/Nickel Cadmium Type) consisting of 55 No. cells with Float Cum Booster type battery charger as per specifica...
DC Distribution Panel (Indoor) as per technical
specification comprising of earth fault indicator,
indication circuit for AC mains failure, 1 no. 100A
SFU for I/C + 12 nos. 32A SFU for O/G, complete
Copper Control Cables :
1.1kV PVC insulated Copper Control Cable with Lugs/Ferrules as per technical specifications.
i) 19 C x 2.5 Sqmm
iii) 4 C x 6.0 Sqmm
iv) 4 C x 2.5 Sqmm
v) 2 C x 2.5 Sqmm
vi) 2 C x 6.0 Sqmm
11KV U.G. Cable with the required cable terminations at both ends. a) 11KV XLPE cable, 1000Sq. mm. (2 Runs of 1Cx1000 Sq.mm) Aluminium cable from 66/11KV transformers to 11KV Switchgear.
b) 11KV XLPE cable, 3x240Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV take off DP Structure.
c) One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch Gear to Auxiliary Transformer).
Cable Termination kits suitable for following sizes as per Technical Specification.
A) Heat shrinkable type Cable Termination Kits suitable for 1X1000 Sqmm XLPE Cable(Indoor type)
B) Heat shrinkable type Cable Termination Kits suitable for 1X1000 Sqmm XLPE Cable(Outdoor)
C)Heat shrinkable type Cable Termination Kits suitable for 3X240 Sqmm XLPE Cable(Indoor type)
D)Heat shrinkable type Cable Termination Kits suitable for 3X240 Sqmm XLPE Cable(Outdoor type)
E)Heat shrinkable type Cable Termination Kits suitable for 3X95 Sqmm XLPE Cable(Indoor type)
F)Heat shrinkable type Cable Termination Kits suitable for 3X95 Sqmm XLPE Cable(Outdoor type)
Equipment required for establishing SCADA Communication as per KPTCL specification
Note:1)Satellite communication required will be arranged by SLDC 2)The detailed BOM& specification of SCADA equipmen...
2) Data Concentrator Unit (DCU)
3) 2kVA online UPS (230V AC 1Phase 50Hz)
5)Cables -Supply & laying Note:Scope invoves supply & laying of following cables a. Current cables-Copper core with c/s 4.0sqmm multistrand 4 core
b. Voltage cables-Copper core with c/s 2.5sqmm multistrand 4 core
c. Signal cables- armoured Copper core with c/s 0.5sqmm multistrand 10 core
d. Control cables- Copper core with c/s 1.5sqmm multistrand 10 core
e.Supply Cables-Copper Core with c/s 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications.
f. Supply Cables-Copper Core with c/s 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications.
g. RJ-45 Cable for Energy meter Integrtaion to DCU (market Rate)
B) SCADA Integration of new bays in existing sub-station: Note: 1. Satellite communication required will be arranged by SLDC . 2. The detailed BOM & Specification of SCADA equipment shall be obtained ...
Opto Coupler (220 or 110V DC) including labour (market rate)
Contact Multiplier Relay(CMR)
Terminal blocks (Knife type)
Fire fighting equipment with necessary mounting stands. a) Foam type extinguisher (Mechnical type): i) 50.0 litres capacity
ii) 9.0 litres capacity
b) Water type (Gas pressure type) - 9.0 litres capacity
c) Carbondioxide type - 4.5 Kg capacity
d) Sand type i) G.I. Bucket 9 litres capacity
ii) Steel stands for the above to have 4 Buckets to each stand.
Maintenance Tools and Plants
Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons)
Telescopic ladder Aluminium 6 Mtr. Height
Ring spanner set
Tube spanner set
Pipe wrench 24 inch
Pipe wrench 18 inch.
Hydraulic crimping tools up to 1000 Sq.mm
Rubber hand gloves (15 kV tested)
Rechargeable 5W LED hand torch
Hand torch 3 Cells
Insulated cutting plier 12 inch size
Insulated cutting plier 8 inch size
Line live tester AC/DC 500 V
Screw driver 18 inch
Screw driver 12inch
Chain pulley block 5 ton capacity
Hydraulic jack 5T capacity
Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. Height
Transil oil di-electric break down (with 2.5 mm gap 0-60 kV) Tester.
Insulation megger 2.5 - 5 kV
Insulation megger 500 V
SF-6 gas leak Detector
Multimeter electromechanical
Multimeter Electronic
DC Voltmeter range -5V to + 5V
Hydrometer syring suitable for vent holes
Specific gravity correction chart
Thermometer with wall mounting holder
Protective goggle
Acid resisting jars (4 pint capacity)
Rubber shoes knee height
Grounding sticks extendable upto 18 ft
Wall mounting type holder for hydrometer
Furniture for Control Room Staff and Maintenance Staff : a) Steel Almirahs 6.5 feet
b) Steel Almirahs 6.5 feet with glass panel doors
c) Officers Tables
d) Steel Slotted Angle rack (big size)
e) Steel Slotted Angle rack (small size)
f) Steel Dust bins
g) Executive revolving chairs
h)S Type arm chairs
i) Steel folding chairs
Miscellaneous items: Miscellaneous items like rubber mats, first aid box, danger boards, shock treatment charts water filter door locks, fixograph, sub-station name board, and other sundry items (size...
Shock treatment charts, hard board, laminated with coloured pictures & literature both in Kannada & English.
Water filter/ Water purifier: Wall mounting type (Aqua - guard type)
Sub-station name board duly painted as per specification including erection & Civil Works.
Supply & erection of Fixograph of size 1.5m X 2.5m with English/ Kannada alphabets.
Door locks 7 levers (Navtal make)
Danger board ( prohibited ) with support structure including fixing in front of the gate
Equipments name plates and earthing name plates including fixing at outdoor yard
Station yard lighting (outdoor):Design of Station Yard illumination in Confirmity with the illumination levels mentioned in the Technical Specification, Supply and erection of Station Yard illuminatio...
Substation Erection Template
Power Transformer :
10 MVA, 110/11 KV, Delta/Star, Dyn11, 3-Phase, 50 Hz, Core type winding with OLTC, RTCC Panel, etc., complete filled with Transil Oil with 10% spare oil with Terminal connectors su...
Circuit Breaker :
SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting arrangements, rigid bi-metallic terminal connector complete su...
b) For 110kV Line without capacitive trip device
Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators:
A)110KV, 1250A, 40KA Class Dou...
b) Upright mounting type without earth switch with live point height 6350 mm. Terminal connector with 63 mm /75 mm AI pipe/ Drake ACSR Note:i)Flexible type terminal connector suitable for 63mm Alumini...
ii) 11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for Coyote ACSR for capacitor bank.
iii) 11KV isolators, Single break 400A, 25KA capacity with Roaster switch, with rigid bi-metallic terminal connectors suitable for Coyote ACSR.
Current Transformer : Current Transformer including Marshalling box, Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR.i) 110 KV Class, 31.5 KA,...
Current Transformer : Current Transformer including Marshalling box, Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR. ii)110 KV Class, 31.5 KA,...
iii) 11 KV Class, 25KA,NCT of ratio 1200-800/1-1A for REFR Protection. (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos. of 50x8mm Copper ...
Voltage Transformer: (a)Voltage Transformer 110kV, Single Phase, Oil filled outdoor type including marshalling box with rigid bimetallic terminal connectors suitable for drake ACSR as per technical s...
Lightning Arrestor:Surge arrestors (Porcelain housing) Metal Oxide Gap less type as per technical specification with suitable rigid bi-metallic terminal connectors suitable for Drake ACSR.i) 96 KV, ...
ii) 9 KV, 10KA with connector and clamps
Control Panels :Simplex Type Control and Relay Panel complete as per specifications (Control Voltage 110 V DC). NOTE :1) All the C&R panels and associated panels shall be of one and same make for unif...
b) 110 kV Line Panel
Total Station & Mounting Structure MS weight
Total Bolt-Nut Weight for Station & Mounting Structures
iii) Erection of D.P. Structure with all accessories using 9.5mtrs long, 300Kg WL RCC poles for mounting 11kV 400A Roaster Isolators and 9KV, 10kA surge arrestor (3 No.) complete set.
Formation of Main/Cross bus with Single Drake /Note: The scope also includes installing insulator strings complete with necessary hardwares and stringing of the conductor/earthwire etc.,
Insulators : Post insulators solid core 110 KV Class, 1 Unit/stack
Auxiliary Transformer: Station Auxiliary Transformer with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn11, off load tap changer (with 5 taps) with step voltage of 2.5%, as per specif...
Erection of Double pole structure with 9.5Mtrs RCC poles and with 11KV, 400A double break isolators, H-Frame and 9KV, 10KA surge arrestors (3 Nos), auxiliary transformer including materials such as ...
LTAC panel (indoor): 415 V as per technical specification comprising of voltmeter and ammeter,1 I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU,+ 2 nos. 3 Phase 32A O/G SFU 100A + 14 O/G
SFU, 6 nos. 3 Phas...
B)AC Distribution Box Single front (Outdoor type) 6 Terminal, one I/C of 100A MCCB 20kA + 6 O/G MCB 16A + 1 O/G of 100A, HRC fuse, complete as per technical specification.
LT Power armoured UG cable as per specification.a) 1.1 KV, 4 X 95 Sqmm Aluminium, cable with glands/lugs/ferrules
b) 1.1 KV, 4 X 25 Sqmm Copper, cable with glands/lugs/ferrules
b) 1.1 KV, 4 X 10 Sqmm Copper, cable with glands/lugs/ferrules
Station Battery:
110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type) consists of 55 Nos. of cells with accessories as per specification.
Station Battery charger: Battery charger suitable for 110V, 200AH, Battery set (Plante/Grid/Nickel Cadmium Type) consisting of 55 No. cells with Float Cum Booster type battery charger as per specifica...
DC Distribution Panel (Indoor) as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A
SFU for I/C + 12 nos. 32A SFU for O/G, complete a...
Copper Control Cables :1.1kV PVC insulated Copper Control Cable with Lugs/Ferrules as per technical specifications. i) 19 C x 2.5 Sqmm
iii) 4 C x 6.0 Sqmm
iv) 4 C x 2.5 Sqmm
v) 2 C x 2.5 Sqmm
vi) 2 C x 6.0 Sqmm
11KV Switchgear : 11kV, 500MVA Metal Clad VCB Switchgear (1600A for Incomer and 1250A for feeders), outdoor type, each comprising of 1IC+6F+1CB+1AP (Remote Announciation cum Control panel) with CTs...
11KV U.G. Cable with the required cable terminations at both ends. a) 11KV XLPE cable, 1000Sq. mm. (2 Runs of 1Cx1000 Sq.mm) Aluminium cable from 66/11KV transformers to 11KV Switchgear.
b) 11KV XLPE cable, 3x240Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV take off DP Structure.
c) One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch Gear to Auxiliary Transformer).
Cable Termination kits suitable for following sizes as per Technical Specification.
A) Heat shrinkable type Cable Termination Kits suitable for 1X1000 Sqmm XLPE Cable(Indoor type)
B) Heat shrinkable type Cable Termination Kits suitable for 1X1000 Sqmm XLPE Cable(Outdoor)
C)Heat shrinkable type Cable Termination Kits suitable for 3X240 Sqmm XLPE Cable(Indoor type)
D)Heat shrinkable type Cable Termination Kits suitable for 3X240 Sqmm XLPE Cable(Outdoor type)
E)Heat shrinkable type Cable Termination Kits suitable for 3X95 Sqmm XLPE Cable(Indoor type)
F)Heat shrinkable type Cable Termination Kits suitable for 3X95 Sqmm XLPE Cable(Outdoor type)
Equipment required for establishing SCADA Communication as per KPTCL specification Note:1)Satellite communication required will be arranged by SLDC 2)The detailed BOM& specification of SCADA equipmen...
2) Data Concentrator Unit (DCU)
3) 2kVA online UPS (230V AC 1Phase 50Hz)
4)Integration of RTU,DCU and UPS with field equipments Note:Bidder has to quote only for erection charges
5)Cables -Laying Note:Scope invoves laying of following cables a. Current cables-Copper core with c/s 4.0sqmm multistrand 4 core
b. Voltage cables-Copper core with c/s 2.5sqmm multistrand 4 core
c. Signal cables- armoured Copper core with c/s 0.5sqmm multistrand 10 core
d. Control cables- Copper core with c/s 1.5sqmm multistrand 10 core
e. Cables-Copper Core with c/s 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications.
f. Cables-Copper Core with c/s 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications.
g. RJ-45 Cable for Energy meter Integrtaion to DCU (market Rate)
Earth mat formation:Supplying, Laying and welding of M.S.Flats 50x6mm, applying ACB paint to welded portion as per approved drawing,/standard specification & consolidation and directions of engine...
b) Supplying and Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling o...
c) Supplying and Providing 25mm dia M.S.Rod 1.05m long earthmat spikes including heating, bending top 50mm overlap flattening and making spike edge at one end driving into the earth below the ground ...
d) Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of G.I.Flat 50x6mm continuously welded around the pipe using cast iron welding el...
e) Supplying & providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (nonpressure type) for earth pits including all lead and lifts etc.,
Line Supply Template
LINE SUPPLY PORTION
Total weight of the Towers - Mild Steel (excluding Bolts & nuts)
Total weight of the Towers - High Tensile Steel
(excluding Bolts & nuts)
Total weight of the Towers- Bolts, nuts & washers
Tower Accessories
a) Anti Climbing Devices (Set) as per specification - For 110kV DC Towers
b) Number Plates (1 No. per tower)
c) Caution Plates (1 No. per tower)
d) Circuit Plates
e) Phase Plates (Set of 3 Nos.)
f) Earth Bonds i) 300mm long
g) Grounding of Tower with GI Pipe including the cost of GI Pipe, Gi wire etc.,
ACSR Conductor and Ground wire
a) Lynx ACSR conductor(plain terrian)
b. Groundwire ACSR conductor
INSULATOR STRINGS :110kV lines:
NOTE: All the Insulator strings and hardware fittings quoted by the bidder shall be of the same type i.e. all the Insulator strings and hardware fittings shall be of Di...
B. Suspension insulator strings consisting of any one of the following: a. Insulator string consisting of 1X7nos. of 90kN Disc insulators Or b. Porcelain long rod insulator string equivalent to 1X7nos...
Insulator Hardwares suitable for LYNX ACSR Condyctor:
NOTE: All the Insulator strings and hardware fittings quoted by the bidder shall be of the same type i.e. all the Insulator strings and hardware f...
ii) 110kV Clamps, Arcing Horns and Hardwares (Set) suitable for Double Tension String fittings using 2x8Nos. 90KN EMS, Disc Insulators
iii) 110kV Clamps, Arcing Horns and Hardwares (Set) suitable for Single Suspension String fittings using 7Nos. of 90KN EMS, Disc Insulators
iv) 110kV Clamps, Arcing Horns and Hardwares (Set) suitable for Double Suspension String fittings using 2x7Nos. of 90KN EMS, Disc Insulators
Accessories for ACSR Lynx conductor:
a) Mid Span Compression Joint
b) Preformed armour rod
c) Repair sleeves
e) Vibration dampers
Hardware & Accessories for Ground Wire:
a) Mid Span Compression joint
b) Repair sleeves
d) Tension clamps(bolted type)
e) Suspension clamps(bolted type)
Mandatory spares template
Circuit Breaker (CB)
Closing coil with resistor (For one Complete Circuit Breaker)
a) for 123KV CB
Tripping coil with resistor (For one Complete Circuit Breaker)
a) for 123KV CB
Terminal Pad (For one Complete Circuit Breaker)
a) for 123KV CB
Terminal Connector (For one Complete Circuit Breaker)
a) for 123KV CB
SF6 Gas (40% of total gas Qty. for Sub-Station at Navadagi)
Copper Contract fingers male & female (For one Complete Isolator)
a) for 123KV Class
Terminal Connector (For one Complete Isolator)
a) for 123KV Class
Terminal Pad (For one Complete Isolator)
a) for 123KV Class
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ra...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mix...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fencing with G.I. barbed wire R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and en...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin ing, including cost of materials, labour, curing as per ...
Supplying lowering laying, jointing, testing and commissioning of following diameters glazed stone ware pipes, conforming to IS 651:1992, (with 5th revision) in all respects jointing with EPDM rubber ...
Supplying lowering laying, jointing, testing and commissioning of following diameters glazed stone ware pipes, conforming to IS 651:1992, (with 5th revision) in all respects jointing with EPDM rubber ...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape...
Providing and fixing PTMT pillar cock of approved quality and colour : 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
25 mm nominal bore
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions ...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...
Providing 20 mm cement plaster of mix :1:6 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing & fixing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement: 4 coarse sand) mixed with 2% inte...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming ...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of appr...
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in- charge: Polyester powder coated minimum thickness 50 micron aluminiu...
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Powder coated minimum thickness 50 micron aluminium including cos...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing and laying to required line and slope roofing with corrugated asbestos cement sheet 6mm. thick fixed with galvanised iron J or Lhooks, bolts and nuts 8mm. dia C.I plain and bitumen washers o...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.
Providing, supplying to work site Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, with testing of as per instructions of engi...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications...
SUBMERSIBLE CABLE:
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest ...
PRESSURE GAUGE :
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
NON - RETURN VALVE :
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No AnalogV...
POWER CAPACITOR :
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissionin...
MCB : Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/1...
Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof ...
Erection elctrification & Commissioning works of pumpsets :
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supp...
Ercerion of panel board & meter board Unit :
Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...
Main connections:
Supplying brand new PVC insulated steel/wire steel tape armoured UG cable with PVC outer sheting 1.1KV class confirming to IS-1554-1998 with amedenments with ISI Std. From KEB pole ...
Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal pro...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/ Telephone Socket
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 12" Sweep (300mm)
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...
Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary le...
Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
Stepped Fan Regulator Two Module
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...
Line Erection Template
SURVEY : Check survey & tower spotting. Note: As per UNI-SR 2023, Vol-VI and Tender Documents.a) Plain Terrain.
Installing insulator strings complete with necessary Hardwares, Installing and stringing of ACSR Lynx conductor including fixing of conductor accessories etc., Note :- The tenderers are required to qu...
b) Installing and stringing of 7/3.15 mm earthwire including fixing of earth wire accessories and hardwares. Note :- The tenderers are required to quote the rates taking in to consideration the charge...
Erection of Towers including tack welding, fixing of tower accessories , Anti Climbing Devices, earthing & technical specifications (The weight includes the wt. of std., tower & stubs, including bol...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Pre-Bid Proceedings.pdf
Tender Document • 0.67 MB
Revised Technocommercial sheets navadagi.xlsx
Tender Document • 1.00 MB
Navadagi Tender document-2.zip
Tender Document • 20.66 MB
Navadgi Tender Document-1.zip
Tender Document • 9.92 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .