REPLACEMENT OF FURNITURE AGAINST BER FURNITURE AT INS SHIVAJI LONAVLA

Amount

Almirah large steel :- Overall size shall be all as shown on drawing. It shall be made of 20 gauge thick mild steel sheet. The almirah shall have four shelves equally spaced five compartments. The almirah shall have one normal handle 120 mm long having three way locking system with proper workmanship. All joints and welding, fixing shall be done according standard workmanship.Rest all as per drg No FD-1031 . Make of Lock :- Link/Godrej/Harrison. Finish & Paint :- All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab.

Bath Stool PVC : -Overall size shall be all as shown on drg No 'FD/E6/ MAP/07 . Make- Amko or equivalent

Bed hard :- Overall size shall be all as shown on drg. All steel shall be rectangular MS pipe of 18 gauge thick. The head board shall be 800 mm high and foot board shall be 500 mm high. The head and foot board shall be provided with 18 mm thick pre laminated particle board exterior grade (Colour and shade as approved by GE). 2 mm thick PVC half round edge beading without joints shall be provided all around . The top of bed hard shall be 12 mm thick BWR plywood ISI mark 303 grade provided as shown on drg. All joints and welding, fixing shall be done according standard workmanship. Rest all as per drg No FD/E6/MAP/08 (R). Make of Plywood : Archidply/Century/Green Ply/Kitply Finish & Paint :- All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab.

Bin linen multipurpose-:The sides, partitions, shelves, drawers of the bin linen shall be made of 18 mm thick pre laminated particle board exterior grade (Colour and shade as approved by GE). 4 mm thick half round teak wood beading without joints shall be provided as per drg.The back of the bin linen shall be of 12mm thick commercial plywood BWR grade. Shutters shall be provided with magnetic catchers. In addition wooden base frame to be provided with 925 mm long rail of size 25x40 mm both sides, 300 mm short rail of size 25x40 mm both side and 45x45 mm legs to each corners at 75 mm height as directed by Engr-in-charge. Rest all as per drg No 'FD/E6/MAP/09. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish.

Chair writing :-The frame of the chair shall be of MS tubular frame powder coated ,cantilever type of size 25mmx10mm in section. Back form shall be designed with contoured lumber support for extra comfort.12mm thick hot pressed plywood upholstered with superior quality fabric as approved by GE and moulded polyurethane foam of approved make with PVC lipping alround shall be provided at seat and back.PU arms shall be of superior quality and reinforced with MS insert.All joints and welding, fixing shall be done according standard workmanship. Rest all as per drg no 'FD/E6/MAP/12. Make of cushion:- Sleepwell/Kurlon/Godrej interio Finish & Paint :-All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab.

Chair executive revolving high back :- High back chair in black colour with leather padded wooden arms and mechanism. Size of chair 660 mm (L) x 500 mm m(D)x 1265 mm (H) TP. Item Code : HOPE/HB Make : Durain or equivalent

Chair dining :-Overall size shall be all as shown on drg.All wood shall be first class teak wood.The size of the legs shall be 40x50mm .Front and side rails shall be of size 25x65mm.Stiffners of size 20mmx25mm three in nos shall be fixed as specified in drg.75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.Side frame of back of the chair shall be of section 40x50mm.Four teak wood vertical stiffners of section 20x30mm shall be fixed in back of chair. 25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.Rest all as per drg No 'FD/MAP-II/04. Make of cushion:- Sleepwell/Kurlon/Godrej interio Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish.

Hat stand with mirror: - Overall size shall be all as shown on drawing. All wood shall be of Ist class well seasoned teak wood. The Frame of Hat Stand shall be provided with 4mm thick teak ply in front (one side teak face). The back of Hat Stand shall provided with 4mm thick commercial plywood. A mirror of 440mm high and 300mm wide, free from all distorition and defects shall be provided on right hand side of Hat Stand. four brass pegs of 75mm wide and 120mm high of shape as approved by GE shall be fixed on left side of mirror. Rest all as per drg No FD-233. Make of mirror : Modigaurd/ Swastik/Saint gobin Polish & Finish: All wood surface shall be Melamine polished with high gloss finish.

Table peg :- Overall size shall be all as shown on drg.All wood shall be first class MP teak.The top shall be of 18 mm thick pre laminated particle board exterior grade (Colour and shade as approved by GE). 4 mm thick half round teak wood beading without joints shall be provided all round the top of table.280 mm long of two Nos short rails of size 20x40 mm to be provided at top and centre rail of size 20x50 mm shall also be provided lengthwise at centre in between the side bottom rails as directed by Engr-in-charge. Hard rubber/PVC shoe shall be fixed to the bottom of all legs as per drg No FD-384. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish.

Receptacle PVC :- Overall size shall be all as shown on drawing. The receptacle shall be of capacity 20 ltrs. The body of receptacle PVC shall be made up of thick polymer plastic of thickness not less than 2.5mm, provided with swivel lid and handles on both sides as shown in drg No 'FD/E6/MAP/13 . Make -Cello, Tupperware, Amko or equivalent as shown in drg.

Rack shoe steel :- Overall size shall be all as shown on drg.The frame shall be 25 mm dia MS pipe with 18 gauge wall thickness.MS rod shall be welded to 20 mm dia MS pipe of 18 gauge thick.Rest all as per drg No 'FD/E6/ MAP/02 ® and as directed by Engr-in-charge. Finish & Paint: All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven tank process.The test certificate for powder coating is to be submitted through NABL accredited Lab.

Side board :-Overall size shall be all as shown on drg. 18 mm thick pre laminated particle board exterior grade (Colour and shade as approved by GE) shall be provided at top and sides (Colour and shade as approved by GE). Four drawers shall be provided equally in this space and telescopic channel to be provided to each drawer as directed by Engr-in-charge. The shutters shall be of 18 mm thick pre laminated particle board exterior grade with 4 mm thick half round TW beading without joint shall be provided alround the front shutters and front of shelves. All drawers and shutters shall be provided with one handle each of powder coated mild steel and 100mm long. In addition wooden base frame to be provided with 925 mm long rail of size 25x40 mm both sides, 300 mm short rail of size 25x40 mm both side and 45x45 mm legs to each corners at 75 mm height as directed by Engr-in-charge. Rest all as per drg No 'FD-1112. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish.

Sofa set 05 seater with cushion :- Overall size shall be all as shown on drawing. All wood shall be of first class well seasoned teak wood (MP). The cushion shall be of size 4" and of 40 density as approved by GE. Cushion shall be covered with best quality tapestry cloth not less then Rs. 250/Mtr and as apporoved by GE. PVC hard rubber shoes of 25 mm dia shall also be provided to bottom of all legs with 20 mm long screws.Rest all as per drg No 'FD-281. Make of cushion: Sleepwell/Kurlon/Featherlite/Godrej interio Polish & Finish:-All wood surface shall be Melamine polished with high gloss finish.

Sofa set 04 seater with cushion :- Overall size shall be all as shown on drawing. All wood shall be of first class well seasoned teak wood (MP). The cushion shall be of size 4" and of 40 density as approved by GE. Cushion shall be covered with best quality tapestry cloth not less then Rs. 250/Mtr and as apporoved by GE. PVC hard rubber shoes of 25 mm dia shall also be provided to bottom of all legs with 20 mm long screws.Rest all as per drg 'FD-281. Make of cushion: Sleepwell/Kurlon/Featherlite/Godrej interio Polish & Finish:-All wood surface shall be Melamine polished with high gloss finish.

Teapoy :- Overall size shall be all as shown on drg.All wood shall be first class MP teak.Top shall be of 18 mm thick pre laminated particle board exterior grade (Colour and shade as approved by GE) and 4 mm thick half round teak wood beading without joints shall be provided all around of top.390 mm long of two Nos short rails of size 30x50 mm to be provided at top and centre rail of size 30x50 mm shall also be provided lengthwise at centre in between the side bottom rails.Hard rubber/PVC shoe shall be fixed to the bottom of all legs. Rest all as per drg 'FD-382. Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish.

SHUBH ASHISH ENTERPRISES (BID ID -3378593)

KASTURILAL HARICHAND OHRI AND SONS (BID ID -3377035)

swastik industries (BID ID -3383072)

shekhar & company (BID ID -3389159)

M/s Raghav Traders (BID ID -3391231)

M/s S.D Construction Co (BID ID -3390984)