Const. of Jen office App.Road unloading Platform,Yard Dev. Fencing,Parking and Other Dev.works at 33 kv s s Bonli.

Amount

Providing and fixing of precast concrete blocks of M 30 grade manufactured from fully computerized automatic stationery hydraulic vibropressed machine and fully computerized automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm thick bed of coarse sand and the joints is to be filled with fine sand laying procedure on compacted sub-base as defined complete job is to be executed as per the instruction of Engineer in charge. And top surface of tite should be Design tile as per engineer in charge the rate to inclusive of all leads lift & taxes, General specifications of blocks as under: (1) Shape as defined by Engineer in charge (2) Tensile splitting strength and braking load as per BS:6717:2001 (3) Colour as approved by E/I (4) variation in dimension: must be less than 1.6mm (5)Variationin thickness : must be less than 3.2mm (6)Abrasion : As per BS; 6717:2001 (D)100 mm Plain cement concrete

Earthwork in filling of excavated earth exept ordinary soil with watering and compaction of spreaded earth in 15-30 cm layers levelled and neatly dressed as per requirement of site and direction of engineer in charge, work includes cost of earth with taxes, loading, unloading transportaion. labour, water and T&P etc. complete with all lead and lift

Supply, stacking & spreading & consolidation of quarry rubbish in layer of 15cm including all lead & lift transportation, loading, unloading with watering and ramming consolidation with labour, T & P, machinery, water etc. complete in all respect finishing in line, level & camber as per direction of Engineer incharges.

Poviding and fixing steel almirah shutters for almirah & wardrobes etc. in different sizes as per site requirement made with 20 gauge CNC sheet and having three way locking devices with six. Brass levers lock and godrej type handles and 10 mm dia locking rod, painted with three coats of superior quality danedar synthetic enamel paint over approved quality in all respect including fixing at site or with help of suitable hold fasts or nuts & bolts. etc. ( measurment shall made for front elevatio /size of shutters including width of frame

Providing & fixing sign board as per approved drawing and specification made of M/S sheet 1.6 mm thick of size 1200 x 900 mm stiffened by flat 20x3 mm on both side all around the plate and duly framed with 32 mm dia medium MS black pipefixed on frame of 50 mm dia medium pipe ( vertical post 3600 mm , 3000 mm above ground level with angle iron hold fast 35x35x5 mm wih horizontal member 1500 mm to be jointed with flat 40x6 mm and psot embedded in cement concrete blocks M-15 grade of 450x450x750 mm size below ground level as directed by engineer all MS will be stove enameled and both side lettering figuring and border on sheet with ready mix synthetic enamel paint of superior quality in required shed and colour etc. complete in all respect all support framed post and steel tubes will be painted with primer and two coats of enameled paint as per specifications and direction of engineer in charge . over all size 1500x1200 mm .

Supply of different varities of treeplants at site including loading unloading transportation etc. digging of pits in ordinary soil of size 60 cm x 60 cm deep & refiling the same with the excavated earth mixed with anure in the ratio of 2:1 by volume ( 2 parts of stacked volume of earth after reduction by 20 % parts of stacked volume of earth after reduction by 8% flooding with water & dressing including removal of surplus earth including cost of manure & maintenace of plants ( only live plants afters the expiry of six month/workperiod from the date plantation are to be measured for payment .

P&F pre- painted Alu-Zinc sheets (gal volume base) of 0.5mm thick in trapezoidal profile & made of 55% aluminium, 43% zinc, 1.6% silicones. The sheet duly coated by AZ 150 coating (Reqular modified polyester painting) of 18 to 20mm micron on top surface & 5 to 7 micron on bottom surface . tensile strenth of sheets should be 550 mpa. The sheets should be fixed with self tapping self drilling screws. the shade of sheets decided by site engineer. The job includes all labour, T&P, loading unloading, transportion etc. complete in all respect.

M/s M. K. Constructions

Raj Kumar Solanki

Raj Kumar Solanki

MS BHUMIKA CONSTURCTION