CONSTRUCTION OF NEW POSTMARTAM COMPLEX ( UNDER UPGRADATION) AT INDRA GANDHI GOVT. MEDICAL COLLEGE AND HOSPITAL TAH. AND DIST. NAGPUR.(Second Call)

Amount

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc.

Dismantling Stone masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc.

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.

Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary including shoring and strutting etc. complete. (Lift upto 1.5 m.)By Manual Means

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m)By Manual Means

Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m)By Manual Means

Providing soling using 80 mm size granite / quartzite / gneiss / trap metal in 15 cm. layer including hand packing filling voids with sand / grit, ramming, watering complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc.complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing outwater, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc.complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand

First floor

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

First floor

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Providing and Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm. to 20cm. including watering and compaction etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping,compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand

First floor

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

First floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

First floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

First floor

Providing and laying in situ M-20 Cement concrete or trap / granite / quartzite / gneiss metal for RCC work of walls including scaffolding, compaction, finishing, plywood/steel formwork, steel centering. The C.M. 1:3 plaster is considered for rendering uneven and honey combed surface only. (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering / formwork will not be allowed).

First floor

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations,slabs, beams columns, canopies, staircase, newels, chajjas,lintels pardis, copings, fins, arches etc. as per detailed designs,drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

First floor

Providing and constructing masonry in Autoclaved Areaclaved ( Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of size ( 625x240x225)mm in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in superstucture including,striking joints,racking out joints watering and scaffolding etc.complete

First floor

Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)

First floor

Providing and laying water proofing treatment to terrace with B.B coba in all position with average thickness of 150 mm consisting specliesd material as per the manufacture specification and covering 10 years guarantee on court fee Stamp Papers including all lid lift etc. complete.

First floor

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

First floor

Providing and applying Texture plaster with finishing with Purlina/ Rustic texture material (with texture material of Asian/ Renava/ Nitco/ Temtex or equivalant company make) in 3 to 4 milimeter thickness on previously finished plastered surface including plaster Groove 6mm thick or Tape Grooves 35 to 45 mm thickness or as required in all postion including preparing the surface scaffolding etc. complete. ( Excluding texture Paint and Texture Paint Finishing) (Prior permission of S.E. is required before inclusion of this item in the estimate)

First floor

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete

First floor

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

First floor

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.

First floor

Providing patti/ band 75mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete.

First floor

Providing patti/ band 100mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete.

First floor

Providing and applying Nerolac excel antipeel or equivalent approved brand exterior emulsion paint of approved quality, colour and shed to old and new surface in two coats,including exterior Acrylicprime coat , ,scaffolding Preparing the surface etc complete.(Heat reflective Paint)

First floor

Providing and applying Nerolac impression 24 carrat Luxurt or equvalent approved brand Emulsion paint to interior wall and ceiling of approved quality and colour and shade to new surface in two coats including subsurface prepration by acrylic putty and acrylic primer coats inc. scaffolding prepare the surface etc complete (Low VOC)

First floor

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing and laying vitrified stone effect tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) Flooring

First floor

Providing and laying vitrified stone effect tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) Skirting 33.47

First floor

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.

First floor

Providing and laying ceramic tiles of RAK/ Kajaria / Nitco /Asian or equivalent make having size 30 cm. x 60 cm. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

First floor

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

First floor

Providing, laying & fixing exterior grade fibrilling fibre reinforcement heavy duty designer cement concrete tiles for Flooring of approved colour and design 22 +/ -2 mm thick bayer colour pigmented as per IS ..1237 - 1980 having compressive strength more than 500 kg/sq.cm reaffirmed in 2006 ,having wert transvrse strenghth of 3.5 / mm 2, water absorption less than 10 % abrasion / wear resistance less than 2 mm ,skid resistance more than 25.0 (ASTM:E303) and no fading as per DIN - 51094 like ultra tiles 300 x 300 or equivalent ,in plan / designed pattern on a bed of 1:4 cement mortar including cement float ,filling joints with neat cement slurry ,curing, polishing and cleaning etc. complete. For flooring.

Providing, laying and fixing exterior grade fibrilling fibre reinforcement heavy duty designer cement concrete tiles for steps and dado of approved colour and design 22 +/ -2 mm thick bayer colour pigmented as per IS 1237 - 1980 reaffirmed in 2006 ,having wert transverse strength of 3.5 / mm 2, water absorption less than 10 % abrasion / wear resistance less than 2 mm ,skid resistance more than 25.0 (ASTM:E303) and no fading as per DIN - 51094 in plan / designed pattern on a bed of 1:4 cement mortar including cement float ,filling joints with neat cement slurry ,curing,polished and cleaning etc. complete. For steps, and dado

First floor

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.

First floor

Providing Half-round Moulding ( Full Moulding ) to 18 mm to 20 mm thick granite stone including fine polishing and cleaning etc. completeProviding Half-round Moulding ( Full Moulding ) to 18 mm to 20 mm thick granite stone including fine polishing and cleaning etc. complete

First floor

Providing and fixing black kadappa stone shelves 25mm. thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete.

First floor

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Flooring

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.

First floor

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete

First floor

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

First floor

Providing and fixing cold rolled steel hollow door frame 105mm x 60mm for anysizes including hold fast hinges, tie members with red oxide and gray paint etc. complete as per I.S.I. specifications and code of practice prescribed including anticorrosive treatment as directed by the engineer.

First floor

Providing and fixing single or double leaf panelled door shutter excluding frame with glazed openable fanlight shutter 35 mm thick as per detailed drawing consistingpanelled vertical styles 100 mm x 35 mm and lock and bottom rail 200 mm x 35 mm and panels 12 mm thick both side commercial ply faced particle board including stainless steel fixtures and fastening and T.W. beading at junctions of panel inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete.

First floor

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete.

First floor

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary

First floor

Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating with box

First floor

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.

First floor

providing and fixingJaquar or equvalent make series oval type under counter wash hand basin of 420 x 590 mm x 195 mm size mdel No.CNSWHT705 with approved make piller cock ,code No DRC-37001 /37001 GA /37001 GB /37001 Gd angular stop cock long thread jaquar or equvalant make continental Cat No Cn -059) including S.S bottle - Trap of jaquar or equvalant make having code No.ALd 769L and necessary pipe conection upto theoutside face of wall as per detailed drawing or as directed by engg incharge etc complete.

First floor

Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall.

First floor

Providing and fixing 10 cm PVC nahani trap with grating etc. complete.

First floor

Providing & fixing on walls/ ceiling/ floors, 15 mm dia. CPVC pipes with necessary fittings. remaking good the demolished portion complete.

First floor

Providing & fixing on walls/ ceiling/ floors, 25 mm dia. CPVC iron pipes with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats complete.

First floor

Providing & fixing on walls/ ceiling/ floors, 32 mm dia. CPVC iron pipes with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats etc. complete.

First floor

Providing & fixing on walls/ ceiling/ floors, 40 mm dia. CPVC pipes with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats etc. complete.

First floor

Providing and laying in trenches 15 mm dia. CPVC pipes of with necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete.

Providing and laying in trenches 25 mm dia. CPVC pipes of with necessary excavation fitting remaking good the demolished portion with filling trenches complete.

Providing and laying in trenches 32 mm dia.CPVC necessary excavation fitting remaking good the demolished portion with filling trenches etc complete.

Providing and laying in trenches 40 mm dia. CPVC pipes? with necessary excavation fitting remaking good the demolished portion with filling trenches etc complete.

Providing and laying in trenches 50 mm dia. CPVC pipes? with necessary fitting remaking good the demolished portion with filling trenches etc complete.

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres First Floor

Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.

First floor

Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

First floor

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

First floor

Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

First floor

Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

First floor

Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets & necessary fittings and tested as per municipal requirements etc. complete.

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

First floor

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

First floor

Providing and Fixing 110 mm diameter PVC Rain Water pipe with necessary fittings such as bends, tees, single junctions, slotted vent, clamps etc complete.

First floor

Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete First Floor

Providing and constructing Brick Masonry inspection Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, with C.I. lead cover with frame fixed in cement concrete.

Providing & constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete etc. complete with R.C.C. Cover.

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

First floor

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete.

First floor

Providing and fixing Glass self 125 mm wide and 600 mm long with necessary chromium plated brackets providingT.W.gutties etc. complete

First floor

Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 0.5 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper. ( AS per Item no. 22.42 of schedule of rates of NBO )

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 0.5 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. ( AS per Item no. 22.43 of schedule of rates of NBO )

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible & to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling & covering 10 years guarantee on bond paper. ( AS per Item no. 22.44 of schedule of rates of NBO )

Providing and fixing during laying in RCC Slab rectangular 2 mm thick M.S. sheet fan hook box of size 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface

Providing and fixing mat finish stainless steel lettering of various heights as directed by enginner incharge including material, labour, cleaning etc. complete. a. for single letter like A, B, C etc in English and +,¤É,Eò <iªÉÉnùÒ ¨É®úÉ`öÒiÉÖxÉ1) Upto height of 30 cm

Providing and fixing mat finish stainless steel lettering of various heights as directed by enginner incharge including material, labour, cleaning etc. complete. a. for single letter like A, B, C etc in English and +,¤É,Eò <iªÉÉnùÒ ¨É®úÉ`öÒiÉÖxÉ2) Upto height of 45 cm

Providing and fixing mat finish stainless steel lettering of various heights as directed by enginner incharge including material, labour, cleaning etc. complete. a. for single letter like A, B, C etc in English and +,¤É,Eò <iªÉÉnùÒ ¨É®úÉ`öÒiÉÖxÉ b) For half letters ¨É®úÉ`öÒiÉÒ±É EòÉx½þÉ, ¨ÉÉjÉÉ, =EòÉ®ú,®ú¡É®ú +ÉÊhÉ Ê´É±ÉÉx]õÒ <iªÉÉnùÒUpto height of 30 cm

Providing and fixing mat finish stainless steel lettering of various heights as directed by enginner incharge including material, labour, cleaning etc. complete. a. for single letter like A, B, C etc in English and +,¤É,Eò <iªÉÉnùÒ ¨É®úÉ`öÒiÉÖxÉ b) For half letters ¨É®úÉ`öÒiÉÒ±É EòÉx½þÉ, ¨ÉÉjÉÉ, =EòÉ®ú,®ú¡É®ú +ÉÊhÉ Ê´É±ÉÉx]õÒ <iªÉÉnùÒ Upto height of 45 cm

Providing and fixing 90 cm. x 60 cm. Marble plate engraving 10cm. height letter, figures including painting the lefters/figures with approved colour and shade complete.

Conveying of material obtained from debris of various sorts necessary including loading, unloading and conveying and disposing as directed. Lead of 5.00-8.00 Km

ProvidingandfixingM.S.grilldoor24kg/sqmofvarioussizeas perdetailed drawings withouthot dipcoating ,ironfixtures and fastenings and 3 coats of oil painting etc

First floor

First floor

Providing and fixing in position,Single shuttered aluminium extruded powder coated openable door of over all size 0.90mx 2.40m with aluminium door frame of powder coated section 101.60 x44.75mm, 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x44.5mmx3.00mm thick top rails 47.62x 44.45mm x3.00 mm thick,vertical style 47.62x44.45mm,3.00mm thick and for shutter plain glass panes 5mm thick for top panels and 12mm thick both side laminated phenolbonded particle board panels for bottom panels etc.,I.S.I.mark, with bijagiri having heavy duty concealed lock,necessary beading, glazing clips, PVCgaskets,250mm length tower bolts,150 mm diam.pad handle,etc.asper detailed design and drawing or as directed by engineer in charge including all materials,labours,and equipment etc. complete

First floor

Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use)

First floor

Poviding and fixing C.P bib cock with wall flange of approved make series code No FLr-5047N Ge r equvalent inc. necessary socket,union nut etc complete as per directed by engineer In charge

First floor

Providing and fixing approved make shower head OHS-CHR 35497/35497 GD/35497 GA/ 35497 GB with equvalant arm code No.SHA 49483, equvalant make shower code No.SHA-549 D12 equvalent make hand shower No.HSH-1937/1937GD /1937 GA /1937 GB with equvalant make divertor of code No ALD-079 and FLR 5079k with equvalent make spout code No.SPJ-5463 / 5463 G / 5463 GA/ 5462 GB/ 5463 GD 5463 GE including all necessary pipe fittings and connections etc. complete.as directed by engineer in charge.

First floor

Poviding and fixing white approved make series or equvalent europian type wall hug code No ARS WHT-3991 of size 360 mmx360 mm x575 mm with jaquar or equvalent make flush valve having code No.FLV-1089 SQG inc. soil pipe , vent pipe upto outside face of wall 100 mm dia C.i plug bentd inlet pipe all fitting ,cutting making good wall t etc complete as per directed by engineer In charge

First floor

Providing and fixing white approved make series or equivalent Orissa Pan size 580 mmx 445 mm x 260 mm code No CNS WHT-451 of with jaquar or equivalent make flush valve having code No.FLV-1089 SQG inc. soil pipe , vent pipe upto outside face of wall 100 mm dia C.i plug bentd inlet pipe all fitting ,cutting making good wall etc complete as per directed by engineer In charge

First floor

Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 kg. to 20 kg. Per Sq.m.)

Providing and Fixing of Mineral Fibre Acoustical Suspended Ceiling System with ultima (Bevelled Tegular) Edge Tiles of size 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 20mm , suitable for Green Building application, with Recycled content of 32%. The tile shall be laid on precoated G.I.channel on XL2 Clip having a web height of 32 mm with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7.7 Kgs/M2 and minimum pull out strength of 100 Kgs.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete.

First floor

Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame).

First floor

Providing and filling in the foundation with sand of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer)

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks,laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete.

Providing water proofing in W/C in bath including BB coba on all position consisting of specialized approved water proofing compound and materials as per manufacturers specification and covering 7 years guarantee on court fee stamp paper of Rs 100 including all lead lift and ponding test etc. complete

First floor

Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete.

First floor

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.

First floor

Providing groove to required size at specified location as directed by Engineer, at junction of brick masonry wall and R.C.C beams or Column, at junction of composite masonry, including scaffolding, finishing, curing etc. complete.

First floor

Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally /square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Natural Sand

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.

First floor

Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary.

First floor

Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983).

Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineer incharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. a) Without powder coating. Note While arriving at the rate of item of item weight at 6.90 kg/Sqm is considered.

Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete

Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150 kg capacity , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length aluminium tower bolts, 150mm dia. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc.complete

Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint)

Providing and fixing white glazed Jaquar or equivalent make urinal of series URS-WHT-13257 with Press matic auto closing valve of Jaquar or equivalent make having code PRS-077G. 32 mm diameter P.V.C. flush pipe with fitting and flushing arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall Etc.complete as directed by Engineer in charge.

Providing and fixing C.P.2 Way BIB cock with wall flange of Jaquar or equivalent make series Code No.LYR-/38041 97 GA/38041 GB/38041 GD including necessary sockets/ union nut etc. complete as directed by Engineer in charge.

Providing and fixing Jaquar or equivalent make sink cock with regular swinging spout (Wall Mounted Model) with wall flange Having code no. DRC-37347 GA/37347 GB/37347 GD incluidng other necessary fitting, etc. complete as directed by Engineer in charge.

Dewatering on BHT bases by using water pump including diversion of stream, providing coffer dams earthen bunds, etc as may be necessary for foundation and other parts of the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete

Providing and laying factory made colored chamfered edge cement concrete grass paver blocks of required strength, thickness and size/ shape made by table vibratory method using PU mold laid in required color and pattern over 50mm thick compacted bed of fine sand compacting and proper embedding laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator filling the joints with sand and cutting of paver blocks as per required size and pattern finishing and swipping extra sand and complete as per manufacturers specification and direction of engineer in charge, 60mm thick cc paver block of M35 grade with approved color and design and pattern.

Providing constructing 2.0 meter deep shallow depth percolation pit comprising of 1.0 meter precast RCC ring 300 mm side filling around outside of RCC ring with 40 mm size boulders including filling of percolation pit upto 0.5 meter depth with 25 to 75 mm clean washed gravels followed by 0.5 meter depth of 10 to 25 mm clean washed stones followed by 0.5m of wash river sand including natlon mesh between each gravel media layer including covering with RCC slab manhole frame and cover etc including arrangement for inlet and outlet pipe excavation and backfilling as shown in the drawing.

Drilling of tube well 150 mm dia. In all sort of soil ,hard rock including drilling in all strata, removing drilled stuff out side the tube well complete.

Providing and fixing casing of 150 mm dia of P.v.c pipe 4 t0 6 kg/sq cm including grouting as per is 4985-1938 etc.complete.

construction of platform and necessary drain work etc complete complete.( excavation dry rubber stone filling 2.329 cum and m-25 c.c

Testing of yield of water of bore work by electric pump inc. electricity, pump other necessary assasories etc complete

Preparing Instant Lawn:-Excavating the ground to a required depth of 30cms., removing and conveying unwanted stuff to a required distance as directed. Providing and filling fresh garden soil and manure in excavated area in 2:1 proportion to a height of 20cms. Mixing garden soil and manure thoroughly, well leveling with required slope, light watering on previous night, rolling on surface, fixing readymade lawn turf rolls or slab of required variety as directed. Ramming of It for proper fixing & maintaining till well established by watering, weeding, clipping or mowing etc. complete.

Preparing Ground Cover:-Excavating the ground to a required depthof 30cms., removing and conveying unwanted stuff to a required stuff to a required distance as directed.

Planting clipped Hedge:-Excavating the ground to a required depth of 30cms., removing and conveying unwanted stuff to a required stuff to a required distance as directed…

Preparing Shrubbery:-Excavating the ground to a required depth of 30cms., removing and conveying unwanted stuff to a required distance as directed. Providing and filling fresh garden soil and manure in excavated area in 3:1 proportion to a height of 30cms.

Rose Plant ::-Excavating pit with 0.30x 0.30 x 0.30m, removing and conveying unwanted stuff to a required distance as directed. Providing and filling the pit with fresh garden soil and manure in 3:1 proportion to a height of 30cms.

Planting small & medium size ornamental / flowering Plants::- Digging pit with 0.60 x 0.60 x 0.60m, removing and conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil and farm yard manure 3:1 proportion.

Planting large flowering/ Shady trees::-(Minimum height to 2 mts.) Digging pit with 0.90x 0.90 x 0.90m, removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.30m.

Planting large flowering/Shady trees::-(Minimum height to 1 mts.) Digging pit with 0.90 x 0.90 x 0.90m, removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.30m.

Laboratory Testing of Cement Basic test

Laboratory Testing of aggregate :- water absorption, specific grvity,impact value/crushing value.

Laboratory Testing of aggregate :-sieve Analysis

Laboratory Testing of aggregate :-abrasion value

Laboratory Testing of aggregate :-flakiness index and elongation index

Laboratory Testing of aggregate :-soundness

Mix Design concrete

Laboratory Testing of Sandfineness modulus(sieve analysis),silt and clay cointain

Laboratory Testing of Sand silt cointain

Laboratory Testing of Brick water absorption, compressive strength efflorence

Laboratory Testing of flooring of natural stone (kota kudappa,etc)

Laboratory Testing of Ceramic tiles water absorption, modulus of repture

Laboratory Testing of Cement concrete compressive strength

Laboratory Testing of morter compressive strength

Laboratory Testing of Steel bar testing weight per meter, ultimate tensile stress, yield stress, elongation

Concrete paving blocks (compressive strength, water absorption)

Testing of yield of water of bore work by electric pump inc. electricity,pump other necessary assasories etc complete

Laboratory Testing of Water Ph value and chloride content

Laboratory Testing of Flush door (Knife test, adhesion test, end emulsion test)

Laboratory Testing of Particle board (moisture content, density)

Laboratory Testing of Aluminums section (Weight per running meter)

Royalty of sand, hand broken material and murum

Providing services of site supervisory Engineer to supervise/ assist the work on behalf of PWD his/her services will be at the disposal of PWD

Taking and submitting colour photographs of size 4"x6"showing initial condition after execution of the particular item. Photofraphs shall be submitted in album having 64/128 number of photograph in each album etc. complete