Construction of balance work of toilet block at Zilla Sainik welfare building Ambphalla Jammu

Amount

Earth work in excavation in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus be excavated soil within a lead of 50M from edge of cutting . disposed earth is to levelled and neatly dressed in all kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size) including all carriages and cost of material involved.

Providing and laying Reinforced cement concrete 1:1.5:3 (1 Cement: 1.5 coarse sand: 3 graded Stone aggregate 20mm nominal size) in suspended floors, beams, foundations, walls, roofs, lintels balconies, landings, shelves, chajjas, bands, plain window sills, stair cases and spiral staircase having upto 15 degree slope excluding cost of centering and shuttering all work up to floor V level including all carriages and cost of materials involved up to site of work complete.

Reinforcement for RCC works including straightening, cutting, bending placing in position and binding all complete. Mild steel and medium tensile steel bars. including all carriages and cost of material involved.

Brick work with FPS bricks of class designation 75-A in super structure up to floor V-level In cement mortar 1:6 (1cement: 6 fine sand). including all carriages and cost of material involved.

Half brick masonry with bricks of class designation 75 in foundations and plinth in: Cement mortar 1:4 ( 1 cement : 4 coarse sand ) including all carriages and cost of materials involved.

Centering and shuttering including strutting, propping etc. and removal of form work for foundation footings, bases of columns etc. for mass concrete. including all carriages and cost of material involved.

15mm cement plaster on rough side of single or half Brick wall of mix: 1:6 mix (1 cement : 6 fine sand) including all carriages and cost of materials involved.

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer. including all carriages and cost of material involved.

Structural steel work welded in built up section/framed work including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer using structural steel etc. as required in stringers, Grillage, gates, treads landings etc. of stair cases including use of chequered plate wherever all complete. including all carriages and costs of material involved.

Painting steel work with paint of approved brand and manufacture to give an even shade (two or more coats) including applying priming coat complete .

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:13753 of minimum thickness 5mm of approved make like NITCO. ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slury @ 3:3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of material.

Providing and laying in position vitrified floor tiles (2'0" x 2'0") premium quality in floors of approved make like NITCO, KAJARIA or equivalent etc. over 20 mm thick bed of cement mortar 1:4 and jointing with grey cement slurry including pointing in white cement mixed with pigment of matching shade complete, including all leads, lifts, costs and carriages of all materials involved.

Providing / fixing powder coated aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z- sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C. P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer in charge (including glazing and paneling)for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required including all fittings shall be paid for separately.

Providing and fixing C.P. fittings and sanitary ware of approved brand (Jaguar , Cera , Kerovit or equivalent. as directed by EIC).

Urinal with Splendor

WC Indian type

Wash Basin with pedestal

Steel shelve

Soap Dish

C P Grating

C P Cups

Looking Glass

Waste pipe with coupling

C P Towel Rod

C P Towel Ring

PVC Connection

C P Angle valve

C P Pillar Cock

C P Bib Cock short body

C P Bib Cock long nose

Wash basin mixture

Water tank Sintex

Providing and fixing of G I Pipes with fittings complete Job.

G I ½” dia

G I ¾” dia

PVC Pipe 4”

PVC pipe 6”

PVC Pipe 3”

Manhole with cover 1’x1’

Floor trap 3”x4”

PVC Bend 4”

Ball valve 20mm

Union 20mm

Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, Balconies etc consisting of following operations. Complete. A, Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS-2645 and approved over the RCC slab including adjoining walls up to 300 mm height incl. the surface before treatment B, Laying brick bats with mortar using broken bricks/Brick bats 25mm to 115mm size with 50% of cement mortar 1:5 admixed with water proofing compound to IS-2645 and approved over 20mm thick layer of cement mortar of mix 1:5 admixed with water proofing compound conforming to IS 2645 and treating similarly the adjoining wall up to 300mm height including rounding of junction of walls and slabs

C, After two days of proper curing applying a second coat of cement slurry using 2,75kg/Sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by engineer-in-charge. D, Finishing the surface with 20mm thick joint less cement mortar of mix 1:4 admixed with water proofing compound conforming to IS 2645 and approved by EIC including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with near cement slurry and making pattern of 300x300mm/Sq 3mm deep. E, The whole terrace so finished shell be flooded with water for a minimum period of two weeks for curing and for final test. All above operation to be done in order and as directed and specified by EIC 23.7.1 with average thickness of 120mm and minimum thickness at Khurra as 65mm.

Providing gola (Angular fillet) 75x75 in cement concrete 1:2:4 (1 cement : 2 coarse sand :4 stone aggregate 10mm down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per the standard design in 75x75mm deep chase including all carriages and costs of materials involved.

bashir

M/S ABDUL MAJID SEH

Anil Gandotra