Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.3 LAccepted-Finance | L1 | Accepted-Finance Responsive | |
| 2 | L2₹19.4 L+₹1.1 L (5.80%)Accepted-Finance | L2 | Accepted-Finance Responsive |
Tender Value
₹20.3 L
EMD Value
₹40,605
Closing Date
17 Dec 2022, 3:00 pmClosed
EE PBSD APWD Port Blair
EE PBSD APWD Port Blair
Temporary arrangement for Republic Day Celebration at Netaji Stadium, Port Blair during 2022-23. Sub Work - Construction of LG Dias, Welcome Gate and Face-lifting of Netaji Stadium Complex - Re-Call
2022_APWD_8425_1
NIT No.71/EE/PBSD/2022-23
Open Tender
Civil Works - Others
Works
30 days
Netaji Stadium Port Blair
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹40,605
22 Dec 2022
10 Dec 2022
17 Dec 2022
10 Dec 2022
17 Dec 2022
10 Dec 2022
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
All kinds of soil
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Finishing walls with Acrylic Smooth exterior paint of required shade :
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.
Providing and fixing brass bib cock of approved quality :
15 mm nominal bore
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Providing and fixing wood work (Cat-II B) in posts frames and trenching for making stage dias welcome gate etc.(Materials to be taken back by the contractor by dismantling the smae after the function)
Providing and fixing in position facia and eaves boards with 12 mm thick plywood IS 303 of approved qaulity 60 cm wide.(Materials to be taken back by the contractor by dismantling the same).
Providing and fixing Plywood of different size and different thickness wherever required screeing all complete.(Materials to be taken back by the contractor by dismantling the same).
With 19 mm thick Plywood IS :303
With 6 mm thick Plywood IS :303
With 12 mm thick plywood IS:303
Providing and fixingUPVC (SWR) soil, waste and vent pipe (6 kg/Sqm)
110 mm dia
Provding and fixing UPVC Plain bend of required degree.
110 mm dia
Providing and fixing flag (2 mtrx1 Mtr) on G.I pipe(1inch) including excavating holes,G.I.pipe of 6.00 mtr ,stiching charges etc.complete as per direction of Engineer-In-charge.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(Materials to be taken back by the contractor by dismantling/removing the same after the function)
Supplying of red carpet (Acrylic synthetic carpet) of 1.50 mtr wide
Hiring charges of Road roller for levelling ground at Netaji Stadium
Providing and laying of woolen (synthetic) carpet 4 mm of required shade over the plywood flooring.(Mateials shall be taken by removing /dismantling after completion of the function)
Providing and fixing white polyster cloth on LG Dias including stiching all complete as per the direction of ENgineer-In-charge.
Hiring of vehicle/truck for carriage of men & materials within a lead of 5.00 KM.
Providing and fixing door mat of size 90"x60" of approved qaulity.
Providing aluminum plain sheet gutter of 60 cm wide.(Materials to be taken back by the contractor by dismantling)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (Labour rate) (Required paint will be supplied by departmently rest of all ,shall be arranged by the contractor ).
One or more coats on old work
Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer’s specification.(Labour rate) (Required paint will be supplied by departmently rest of all ,shall be arranged by the contractor ).
One or more coats on old work
Finishing walls with Acrylic Smooth exterior paint of required shade :(Labour rate) (Required paint will be supplied by departmently rest of all ,shall be arranged by the contractor ).
Old work (One or more coat applied @ 0.90 ltr/10 sqm).
Varnishing with varnish of approved brand and manufacture:
One or more coats with copal varnish
M/S THAKUR TRADERS AND ENGINEERS
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .