SPL REPAIR TO BLDG NO E-18, 19, 20 AND 21 AT CIRCULAR ROAD 93 CIRCULAR ROAD AND PROVN OF 02 X BATHROOM AND 02 X TOILETS NEAR BLDG NO P-125 AT 21 MAHAR UNDER AGE B/R-III AND AGE E/M-II OF GE (SOUTH) MEERUT CANTT

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc. Complete all as specified & directed.

M & L brick work with fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified & directed.

M&L Brickwork with fly ash/ sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified & directed.

Demolition of cement concrete of ground floor n exc 15 cm in depth in any position nototherwise specifically provided for.

M&L 75 mm thick cement concrete 1:3:6 type C-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed.

M&L coloured Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and no pigment laid over including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm Each complete all as specified & directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn Each complete all as specified & directed.

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125mm (Double rebates) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including stainless steel butt hinges 03 Nos size 100mm, tower bolt aluminium 02 Nos size 150mm long, aluminium alloy handles D type size 150mm 02 Nos for each door complete all as specified and directed.

S&F factory made 30mm thick 100% solid WPC (Wood polymer composite) plain wiremwsh Door Shutter of required size comprising of virgin PVC resin of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (Wood Poweder/ rice husk/ wheat husk) and Non toxic additives, made from extrusion process WPC foam sheet single Extruded (inner) with having minimum density not less than 650 Kg/cbm manufactured an ISO 9001-2015 certified company having good screw holding capacity (Screw withdrawal strength of 2000N (Face) & 1100N (Edge), Minimum compressive of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being Termite/Borer free. water/moisture proof and fire retardant for fixing mosquito mesh and XTN aluminium mesh combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed screws at required distance, screws and deges covered with feathered pvc edge beading all around of mesh and fixing stainless steel butt hinges of required size with necessary full body threaded counter sunk SS screws including stainless steel butt hinges 03 Nos size 100mm, tower bolt aluminium 02 Nos size 150mm long, aluminium alloy handles D type size 150mm 02 Nos and double wiremesh for each door complete all as specified and directed.

S&F Box type steel window/ventilator comprised of tubular frame and shutters made out of 1.25mm thick MS Sheet tube with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc as including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

S & F for 20mm thick board for kitchen cabinet made single extruded WPC (Wood Polymer Composite) solid Moulded WPC board comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: stainless steel butt hinges and necessary S S screws shall be paid separately.

S&F Auto hinges for cabinet case Complete all as specified & directed.

S&F 150 mm size stainless steel bright finish handle for cabinet shutter complete all as specified & directed.

Supply and fix 150mm size helical door spring including roller and plate fixed with screws to wooden or welded to iron chowkat complete all as specified and directed.

M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel (by spraying) complete all as specified & directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc. Complete all as specified & directed.

M&L for 18 to 20 mm thick udaipur green Stone factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

M&L for built in steel cup board with pressed steel frame of size 75 mmx45mmx1.25 mm th with pressed steel shutter 1mm th Godrej pattern fixed to masaonary wall by hold fast made out of 25x3 mm flat iron including ms hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray including locking arragement painting with two coats of synthetic enamel paint over one coat of red oxide primer with two coats of syntetic enamel paint over one coat of red oxide primer all around on steel surface of frame & shutter and making good disturbed portion in cm 1:3 or pcc 1:2:4 complete all as specified & directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets any thickness including cover fillets. Complete all as specified & directed.

Supply and fixing for powder coated aluminium snap grid frame work of size 605 x 605 mm, for false ceiling comprising 40 x 25 x 2mm aluminium angles weight 0.36 kg fixed all along the wall at ends and with aluminium main and cross tee of size 36.50 mm x 25 mm x 1.4 mm weith not less than 0.24 kg per RM including aluminium cleat bolts nuts and washers and 2mm dia GI wire suspenders in alternates panel and preparing holes / chases in wall for fixing angle including fixing suitable for non asbests fibre cement boards in ceiling complete all as specified & directed.

Material and labour for 4 mm thick non-Asbestos ceiling boards 600 x 600 mm, fixed or laid / inserted to timber / GI / Aluminium frame work with screws in ceiling and applying three coat of white wash including preparation of surface complete all as specified & directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fixing for mild steel framed work as in doors / windows or gates of angle, with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or toeht covering runnign rails and guides) and hanging also fastening and fixing complete conforming to Fe 410-W (Gde-E-250) quality A complete all as specified and directed.

S&F 1mm thick mild steel plain, black sheet in wall cladding, steel gates and similior work, cut to size, holes, punched, including round headed screws, eaves boards, clout nails or rivets and fixed to wood or steel framing witn plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. Complete all as specified & directed.

M & L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M & L 15 mm thck rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified and directed.

M & L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth with out using extra cement complete all as specified & directed.

Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed.

Preparation of old surface after complete removal of existing treatment by mechanical means and applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed.

M & L preparation of new plastered surface of wall and applying two coats of exterior emulson paint (weather proof) using using roller over and including applying 2mm thick putty after finishing the wall surfaces complete all as specified and directed.

M&L applying two coats of exterior emulson paint on old surface (weather proof) using roller over and including applying 2mm thick putty after scraping surface by mechanical means and finishing the wall surfaces Complete all as specified & directed.

Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) complete all as specified & directed.

M & L RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in beams, lintels over 1.5 m span etc complete all as specified & directed.

M & L precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves cover slab (for manhole) water trongls, water mangers, etc set in cement mortar 1:6.including all neccesary formwork & finishing exposed concrete surface complete all as specified & directed.

Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poining in cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified & directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises. Complete all as specified & directed.

M&L Non skid ceramic coloured tiles 8-10 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cemnt to match laid over & including 15 mm thick screed bed in cm 1:6 complete all as specified & directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified & directed.

S&F non skid ceramic tiles coloured of 600mmx1200mmx7 to 8 mm (squre/ rectungular ) in floors set and jointed in neat cement slurry and pointed with white or coloured cement complete all as specified and directed.

All as per item No 45.00 here-in-before but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete all as specified & directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site. Complete all as specified & directed.

All as item No 48.00 here-in-before but 20 mm bore pipe.

S&F GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore. Complete all as specified & directed.

All as item No 50.00 here-in-before but 20 mm bore pipe.

Dismantling of old water tank exc 250 Ltr & n.exc 500 Ltr capacity complete all as specified and directed.

S&F triple layer 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes complete all as specified & directed.

S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repair bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron complete all as specified & directed.

S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.

Supply and fixed in repair of PVC low level flushing cistern 10 litre capacity valveless syphonic action type white i as approved incl ball valve float valve and handle,32 mm dia flush pipe complete all as specified & directed.

S&F as in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified & directed.

Supply & fix in repair PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fixing in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and wasters incl bedding in cement mortar to dwarf walls or incl fixing cantilever brackets and connecting union to pipe over all size (915mmx460mm bowl size 410x330x160mm) complete all as specified & directed.

S&F in repair Brass chromium plated shower rose 125mm size complete all as specified & directed.

S&F in repair CP brass soap dish complete all as specified & directed.

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and laid in trenches etc. 75mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix PVC bends 75/110mm bore, any radius complete all as specified & directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.fixed in repair) complete all as specified & directed.

M & L for cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finihes with and incl material and labore in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 /Bk work in CM 1:4 as required at site and as directed by Engr-in-Charge

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m and n. exc. 3m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and getting out complete in soft / loose soil for demolition of existing sewage pipe and laying of new pipe line. Complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft / loose soil. Complete all as specified & directed.

Removing excavated materials n exc 50 mtrs and deposited where directed at a level n exc 50 mtr where directed n exc 1.50 m above the starting point complete all as specified and directed.

Demolition and breaking up of drain pipe salt glazed stoneware of 150mm bore set in cement mortar complete all as specified and directed.

M&L 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified & directed.

M&L Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in for 150mm dia pipe. Complete all as specified & directed.

M&L PCC (1:2:4) Type B-1 using 20mm graded stone aggregate as in cills, plinth courses, string courses, benching of manhole lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

M&L for construction of Septic tanks , exc in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, M-25 RCC slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame vvent shaft and sludge chambers etc complete for 150 users. complete all as shown on drg No TD-217 sheet 1/7 to 7/7 and as directed by Engr-in-Charge.

M& for construction of Soakage well, exc in ordinary soil, foundation in PCC1:3:6, wells of Honey combed and solid in M-25 concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-25 RR masonry/ filling with brick bats, complete of size 2.4m dia x 4.5m deep complete all as shown on drg No TD-309 Sh. 1/4 to 4/4. and directed Engr-in-Charge.

S&F (in repair)chromium plated towel rail 20mm dia D type 600 mm long as a approved quality complete all as specified and directed.

Supply and fixing PVC heavy duty waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F in repair stainless steel plate rack of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one complete all as specified & directed.

M & L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered upto 3.5m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account). Complete all as specified & directed.

S&f in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed.

Supply and fix in repair glass corner shelf fancy type made of 6 to 7 mm thick sheet glass of size 250mmx250mm fixed with chromium plated brackets complete all as specified and directed.

Supply & fix in repair 50 mm wide rubber beading for doors of required size complete all as specified & directed.

S & F in repair 25 mm stainless steel curtain rod with fancy type bracket.and ring complete all as specified and directed.

M&L for 18 to 20 mm thick black granite factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

S&F 50mm thick precast cement concrete louvres and jallies type B1, 1:2:4 (using 12.50mm graded stone aggregate) set in CM 1:4 , 40 mm thick (measured solid), including all mouldings and design as approved complete all as specified & directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection sub-base etc. Complete all as specified & directed.

Surface excavation not exceeding 30CM deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for approved soil filling under the floor, spreading and leveling in layers not exceeding 25cm thick, well remming including watering as required complete all as specified and directed.

Material & labour for hardcore of broken bricks gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Use and waste of Form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal rough surfaces of concrete complete all as specified and directed.

M&L form work to sides and soffits of beams lintels etc finished rough complete all as specified & directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick flat fair finished surfaces of concrete complete all as specified and directed.

M&L for form work to the edge of concrete flat not exceeding 200mm thick complete all as specified & directed.

Supply & fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply & fix mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required as in stirrups complete all as specified and directed.

M&L RCC M-25 design mix (using 20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M & L RCC M-25 design mix (using 20 mm graded stone aggregate) as in Columns, pillars etc complete all as specified and directed.

M&L RCC M-25 (using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material & labour for 5 mm thick plaster in CM 1:3 on ceiling surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for preparation of new plastered surfaces of walls etc and applying two coats of cement base paint over a coat of primer complete all as specified & directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed.

M& L for PCC padding 1:2:4 type B0(using 12.5 mm graded stone aggregate) laid to a minimum consolidated thickness 50mm to provide a finished slope 1:30 complete all as specified and directed.

Material & labour for cleaning of plastered /concrete surfaces and applying priming coat using bituminous primer @ 0.30 Kg/Sqm. followed by evenly a tack coat @ 1.20 Kg/Sqm. using with 85/25 grade bitumen, over laid with 3mm thick APP modified polymeric water proofing membrane with non woven polyester reinforced of weight not less than 3.6 Kg/Sqm. unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer’s instructions and finished top of APP water proofing polymeric membrane with a coat of hot blown industrial bitumen 85/25 grade @ 1.20 Kg/Sqm and finally finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm complete all as specified and directed.

S&F flat iron hold fast 25mm x 6mm welded to angle iron door frame as complete all as specified and directed.

S&F aluminium, sliding door bolts, plate type, 250mm long complete all as specified and directed.

Supply & fixing steel C.P. grating 100/125 mm dia as reqd at site complete all as specified and directed.

S&F for 110 mm bore PVC floor traps plain with grating and 300 mm long out let including jointing with cement concrete type B -1 1:2:4 complete all as specified & directed.

Supply and fix PVC bends 110mm bore, any radius complete all as specified & directed.

Supply & fix steel windows or ventilators fixed type including hold fast, complete all as specified & directed.

S&F mild steel work as for framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, complete all as specified and directed.

S&F Gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed for 20 mm pipe complete all as specified and directed.

S&F Bib tap 15 mm, chromium plated, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

Supply & fix in vitreous china wash hand basin, white, flat back of size 550x400mm (excluding taps, waste chain and plug and porcelain stopper) but including brackets suitable for 15mm dia pipe complete all as specified & directed.

Supply & fix angular valve, 15 mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.

S&F 3mm thick sheet glass, pin headed, and glazing with oil putty/beading in square not exceeding 0.50 sqm each pane complete all as specified and directed.

Supply & fix PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed.

S&F as in repair vitreous china wash down water closet pan (pedestal pattern), white exceeding (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap,including seat covers and all the necessary fittings including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

S&F as in repair 15mm bore pillar tap, long shank, swan neck, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified and directed.

S & F Flush pipe of polyethylene or low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in vitreous china urinal half stall type with including providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar complete all as specified and directed.

S&F PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore complete all as specified and directed.

S&F tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified & directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

Material & labour 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L supply and laying of sand including spreading, levelling and ramming in layeres not exceeding 25mm thick in each layer complete all as specified and directed.

S&F Pre-cast cement concrete block masonry 1:2:4 Type B-1 (using 20mm graded stone aggregates) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified & directed.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in & including PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly complete all as specified and directed for one light point/bell point controlled by one, one way switch 05/06 Amps.

All as per item No 141.00 here -in- before but One fan point controlled by one, one way switch 05 / 06 Amps.

All as per item No 141.00 here -in- before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per item No 141.00 here -in- before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per item No 141.00 here -in- before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

Supply and fix switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

Supply and fix socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.

Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed.

Supply and fix switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed.

S&F door bell ding dong type , 240 volts AC complete all as specified & directed.

S&F switch bell push flush type , 5 amps , 240 volts complete all as specified & directed.

Supply and fixing steped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts, duly ISI marked with and including connector complete all as specified & directed.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified & directed.

Supply and fix LED lamp 9/10 watt. Complete all as specified & directed.

Supply and fix decorative LED Batten 20 Watt including rod complete aluminium housing integtrated type complete with all accessories and fixing material complete all as specified & directed.

Supplying and fixing LED tube light fitting 9/10 watt surface mounted,with extruded polycarbonate , integrated lamp & driver , with opal diffuser and decorative end plates.complete with acessories complete all as specified & directed.

Supply and fix in replacement of decorative wall light fixture made up of polycarbonate suitable for 10 W retrofit LED lamp and including 10 W LED lamp and including all accessories for fixing of fitting on wall complete all as specified & directed.

Supply and installed LED security light fitting 1x45 Watt luminaries with pressure die cast aluminium housing comprising high power with PC cover with LED driver , IP-66 Protection and IK-07 Impact resistance complete IP 65 protection. Complete all as specified & directed.

Supply and fixing (in repair) BLDC ceiling fan not less than BEE 5 star rated , power consumption not more than 46 watts, white colour 1200 mm sweep, copper winding single phase 220 volts, 50 Hz with blade set of 3, down rod including connection with flat 3 core copper wire 1 sqmm from celing rose to connector complete with and including fan hook duly grouted on roof complete all as specified and directed. Note :- Old unsv fan should be deposited to AGE E/M -II under GE(S) Meerut Yard only)

Supplying and fixing LED bulk head light fitting wall mounted with back lit LED 10 WATT watt, IP-66,complete with all acessories complete all as specified & directed.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed.

S&F in repair for sub main wiring with 2x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + o1 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing and taking down the old unserviceable submain wiring of ant type complete all as specified & directed. Note - One meter of conduit along with 2x6.0 Sqmm wire and one 6.0 sqmm earth wire shall be measured as one length.

S&F in repairr for sub main wiring with 4 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of suitable size, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note - One meter of conduit along with 2x4.0 Sqmm wire and one 4.0 sqmm earth wire shall be measured as one length.

Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison for fixing of 1 No MCCB of XT1160 frame suitable upto 160 Amp and 12 Nos MCB'S inside of DB, including 125 Amps ,18 KA 4 pole MCCB with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one including taking down old unserviceable existing complete all as specified & directed.

Taking down unsv distribution board of any type/size and S&F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified and directed.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed.

Taking down unsv cable of any type/size and S&F (in repair) , laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

Taking down old unsv exhaust fan and Supply and fix Exhaust fan 300 mm sweep , single phase 50 HZ , speed 1400 RPM , air delivery 1300 Cumm not more than 80 watt all including making hole if required all as specified and directed. Note:- Old unsv fan should be deposited to AGE E/M -II under GE(S) Meerut Yard

Taking down old unsv exhaust fan and Supply and fixing light duty Exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, not less than Rpm 2000, copper winding and fixing accessories 230 Volt and 230/250mm as per site and direceted with and including making hole of suitable size in the wall, plastering the surface making good damaged portion with plaster in CM 1:4 incl recolouring complete all as specified and directed. Note:- Old unsv fan should be deposited to AGE E/M -II under GE(S) Meerut Yard.

Material and labour for earthing with galvanised steel earth plate electrided 600 X 600 X 6 mm thick buried in ground (earth pit not less than 2.25 mtr depth below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth lead wire 4.0 mm dia by means of bolts nuts chek nuts and washers of galvanized iron or steel earth lead wire protected by and including 15 mm dia GI pipe medium grade pipe for protection and 20 mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earth work as in soft/loose soil, concrete pit in PCC (1:3:6) type c1, pre cast RCC 1:1:5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 100 mm CC both way and 2 No, lifting handle made of 12mm dia TMT bar and set in cement mortor (1:4), funnel wire nesh, char-coal or coke and salt in alternate layer, testing etc complete all as specifide in electrical plate No. 3 of SSR Pt-1 complete all as specified & directed. Note:- (i) If the desired earth resistance is not found within permissible limit, shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 Sqmm and 15mm dia GI pipe medium grade upto 7.5 m is included in the rate quoted for this item.

Taking down old unsv geyser and Supply, install and testing of water heater vertical storage type capacity 25 ltr, 2 KW having stainless steel inner vessal with glass enamlled coating, five star rating, closed/vented type 240 volt glass coated heating element complete with all accessories, including fixing arrangement with suitable size of fastner, nuts, bolt and washer etc making good to distrubed wall surfaces to match with existing complete all as specified & directed. Note:- Old unsv geyser should be deposited to AGE E/M -II under GE(S) Meerut Yard only)

Supply and fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white/colour washing/distempering etc to match with existing disturbed surfaces complete all as specified & directed.

Material and labour for inserting GI TEE 15 mm dia BIS/ISI make heavy duty including in existing GI pipe 15 mm dia and making good the distubed surfaces to match the existing complete all as specified and directed.

Supply and fixing of decorative LED Tube light fitting 1x20 Watt , environmental friendly, energy efficient MS batten with retrofit T8 polycarbonate LED tube-01 No, with batten and all accessories complete all as specified & directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 04 way, with 200 Amps rated complete all as specified & directed.

Supply & fixing MCB SPN, AC, 240 volts of 40 Amps, C curve, 10 kA,. complete all as specified & directed.

Supply and fixing exhaust fan steel body AC single phase 230 V of size 300mm sweep with blade , frame and lauvers complete all as specified & directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 10 Sqmm 2.0 core armoured, PVC sheathed with aluminium conductor heavy duty. Complete all as specified & directed.

M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified & directed.

Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified & directed.

Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

Supply and fixing LED building security light fitting 1x35 Watt luminaries with die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lamp of capacity 35 watt including brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to required shape including flat iron clamps- 02 Nos with suitable size of nuts and bolts including grouted in wall complete all as specified & directed.