81186 CONVERSION OF FLT LIGHT FITTINGS TO RECESS LIGHT FITTINGS OF BLDG NO T-20, P-99 AT MO(PBR), ADDN/ALTN AND SPECIAL REPAIRS TO UG CABLES AND LT PANEL AT HQ ANC AND OTHER SANCTIONED WORKS UNDER GE HADDO SRI VIJAYA PURAM

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down fuse Unit/DBs 415 Volts/230 Volts complete all as specified and as as directed by engineer in charge.

Taking down old aluminium sub main wiring of any size complete all as specified and as as directed by engineer in charge.

M & L point wiring complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLSH PVC insulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed/ surface conduit of size not less than 20mm dia, with all necessary fittings, concealed in walls /roof/ floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-

One light/fan point controlled by one modular switch 5 Amps one way complete all as specified and as as directed by engineer in charge.

One bell point controlled by one bell push switch 5 Amps one way complete all as specified and directed.

Two light point controlled by one switch 5 Amps one way complete all as specified and directed.

One 3 pin switch socket outlet , 5 Amps on independent board. complete all as specified and directed.

One 3 pin switch socket outlet , 5 Amps on same board. complete all as specified and directed.

All as per Item No 4.00 hereinabove but for size 4.0 Sqmm 5 pin switch socket outlet, 15 Amps on independent board complete all as specified and directed.

S & F for switch modular type, 6 Amps 1 module, 230 volts AC circuit out complete all as specified and directed.

S & F for switch modular type, 6 Amps 1 module, 2 way 230 volts AC circuit out complete all as specified and directed.

S & F for switch modular type, 16 Amps 1 module, 230 volts AC circuit complete all as specified and directed

S & F for socket outlet modular type 1 way 6 Amps, 3 pin, 230 volts AC circuit complete all as specified and as as directed by engineer in charge.

S & F Socket outlet 2 in 1 modular type, 3 pin, 6 and 16 complete all as specified and directed.

S & F for ceiling rose, 3 phase, PVC polycarbonate, isolated body complete all as specified and directed.

Supplying & fixing modular bell push 6 Amp one module 230 V AC complete all as specified and directed.

S & F communication modules for tele socket RJ 11 2 Gang Tele socket sap code complete all as specified and as directed.

S & F communication modules for TV socket complete all as specified and directed.

S&F , Electric Bell, single pole working on 230 volts AC supply complete all as directed by Engineer -in- charge

S & F Sub main wiring with PVC insulated FRLSH cable 2 single core 4.0 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red/ Yellow/ Blue, Neutral- black and earth- green in and incl rigid PVC Casing & Capping (ISI marked) incl all specials/accessories etc and provision of PVC insulated FRLSH copper conductor single core 4.0 sq mm for earth continuity all as directed.

Description all as Item Srl No 16 above but sub main wiring PVC insulated FRLSH cable 2 single core 6 sqmm with same size of earth continuity complete all as specified and directed. (Note for item No 16 & 17) : 3 length of cable and one length casing caping shall be measured and paid for one length

S&F Sub main wiring with PVC insulated FRLSH cable 2 single core 4.0 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red /Yellow /Blue, Neutral- black and earth- green in and incl rigid PVC concealed conduit (ISI marked) incl all specials/ accessories etc and provision of PVC insulated FRLSH copper conductor single core 4.0 sq mm for earth continuity complete all as specified and directed.

Description same as per item Sl No 20.0 above but sub main wiring with 2 single core 6.0 sq mm duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire complete all as specified and directed. NOTE for item No 20.0 to 21.0 : Two runs (1P+1N) of copper conductor, One run of copper conductor as earth wire and one run of PVC conduit shall be measured as one unit length.

S & F Sub main wiring with PVC insulated FRLSH cable 2 single core 1.5 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red /Yellow /Blue, Neutral- black and earth- green in and incl rigid PVC concealed/ surface conduit (ISI marked) incl all specials/ accessories etc and provision of PVC insulated FRLSH copper conductor single core 1.5 sq mm for earth continuity all as directed. Note : 3 length of cable and one length PVC conduit shall be measured and paid for one length.

S&F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 8 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and directed.

S&F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 4 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and directed.

S&F MCB SPN 40 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

S&F MCB SPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

Supplying & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 kA complete all as specified and directed.

M&L for Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement all as specified and as directed by Engineer-in- Charge.

Supply and fixing of Decorative ultra slim linear LED lighting fixture of 18 Watt recess mounted, 105 lm/ watt, 220V , 50Hz with extruded Polycarbonate, Aluminium heat Sink ,environmental friendly energy efficient fitting recess mounted round/square in shape (Warm white/white colour as per requirement of site complete) of light as required at site) complete all as specified and directed.

Supply and fixing of Decorative ultra slim linear LED lighting fixture of 15 Watt recess mounted, 105 lm/ watt, 220V , 50Hz with extruded Polycarbonate, Aluminium heat Sink ,environmental friendly energy efficient fitting recess mounted round/square in shape (Warm white/white colour as per requirement of site complete) of light as required at site) complete all as specified and directed.

S&F and testing fully diffused recessed mounted 2'x2' LED luminarie with with high transmitive diffuser for indoor spaces of cap 36 watt ncluding all accessories and fixing arrangements for fixing the light fitting to any heighted indoor palces complete all as specified and directed complete all as specified and directed.

Supply and fixing LED light fittings of capacity 10 watt (Warm white/white colour as per requirement of site complete) with aluminium extruded channel finished in anodised , Class I power factor >0.9 pre wired with electronic driver high translucent frosted PMMA difuser for glare free smooth lighting distrubution surface mounted complete all as specified and directed.

S&F and testing Tube light fittings LED 20 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed complete all as specified and directed.

S&F 12 watt, 220 volts recess mounting LED ceiling light fitting, round/square shape ,slim design LED recessed round polycarbonate housing down lighter with superior light output and integral driver, Efficacy 100lm/w in warm white /natural white as required all as directed by Engineer-in-charge. NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting

S&F 9 watt, 220 volts recess mounting LED ceiling light fitting, round/square shape ,slim design LED recessed round polycarbonate housing down lighter with superior light output and integral driver, Efficacy 100lm/w in warm white /natural white as required all as directed by Engineer-in-charge. NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting.

Supply and fixing in replacement 30 Watt LED building security light fittings, IP-65 luminaire, pressure die cost aluminium housing powder coated graphite grey and toughened glass including necessary fixing arrangements as per site requirements all as specified and directed by Engineer-in-charge.

S& F 25 watts LED building security light fittings made up of pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection. Efficacy ≥ 110LPW including necessary fixing arrangements as per site requirements all as specified and directed by Engr In charge

Supplying and fixing integral LED high bay light fittings not less than 150 watts of lumen output capacity with minimum system efficiency > 110/Lumens/watts of colour temperature 5700K, IP 65, heat proof silicon rubber righ high presure die cast aluminium high transmittance tempered glass cover, including driver and controll accessories complete set with operation voltage between 140w-270w AC PF>.95 with T&P and fitting accessories including 3 core copper cable of size 2.5sqmm connection complete including 3 meter suspension chain (heavy duty, capable of catering load of ibid fitting) all as specified and directed by Engineer-in-Charge.

S&F GI bracket of 25 mm dia and supply and fixing new GI brackets of GI pipe light grade of size 25 mm dia including nuts, bolts and washers for building secufity light complete all as specified and directed.

Taking down carefully old unserviceable ceilling fan of capacity 1200 mm sweep and handed over to MES store yard under AGE E/M Haddo and supply & fixing BLDC 5 star rated ceiling fan metallic body ISI marked 1200 mm sweep, 220V Ac, 50 Hz complete with all accessories complete all as specified and directed

Taking down carefully old unserviceable exhaust fan of capacity 300 mm sweep heavy duty, single ph and handed over to MES store yard undrer AGE E/M Haddo and Supply & fix exhaust fan 300 mm sweeep metal body with louvers incl all fixing arrangement complete all as specified and directed.

S&F exhaust fan of capacity of 250 mm sweep white in colour 220 volts, AC supply complete including the all fixing arrangement Exhaust fan complete all as specified and directed.

S&F wall mounting fan 400 mm sweep incl all fixing arrangement complete all as specified and directed.

Supply & fix AC starter switch of capacity 25 Amps working on 240 volts ACsupply , with 15 Amps plug top and 15 Amps Sockets suitble for air conditioner complete all as specified and directed.

S&F DB VTPN sheet metal enclosure double door IP 43 protection, door earth suitable for incoming upto MCCB 100 Amps/125 Amps & outgoing MCB TP / SP, three pole and neutral 415 V, 4-Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete including taking down old unsv DB of any type/rating and making good to the distrubed surface /walls all as specified and directed.

S&F MCCB 4-pole, 125 Amps, 16 kA 415 volts complete all as specified and directed.

Excavation in trenches n.exc 1.5 mtrs wide and not exv 1.5 M deep in soft/loose soil and getting out all as specified and directed.

Returning, filling in incl spreading, levelling and well ramming in layers not exc 25 cm in soft / loose soil all as specified and directed.

Removing excavated soil to a distance not exc 50M and depositing where directed at level not exc 1.5 m above starting point all as specified and directed.

M&L for bituminous road cutting / Footpath to a width of 60cm and depth 90cm for laying of LT cable and making good with PCC (1:3:6) type B1(using 20mm grade stone aggregate) complete all as specified and directed.

Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 3.5 core x 400 sq.mm. (laid in trenches, ducts, pole, wall etc.) complete all as specified and as as directed by engineer in charge.

Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 3.5 core x 150 sq.mm. (laid in trenches, ducts, pole, wall etc.) complete all as specified and as as directed by engineer in charge

Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 3.5 core x 95 sq.mm. (laid in trenches, ducts, pole, wall etc.) complete all as specified and as as directed by engineer in charge including taking down old one.

Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 3.5 core x 70 sq.mm. (laid in trenches, ducts, pole, wall etc.) complete all as specified and as as directed by engineer in charge including taking down old one.

Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 3.5 core x 50 sq.mm. (laid in trenches, ducts, pole, wall etc.) complete all as specified and as as directed by engineer in charge including taking down old one.

Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 3.5 core x 35 sq.mm. (laid in trenches, ducts, pole, wall etc.) complete all as specified and as as directed by engineer in charge including taking down old one.

Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 3.5 core x 25 sq.mm. (laid in trenches, ducts, pole, wall etc.) complete all as specified and as as directed by engineer in charge including taking down old one.

Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 2 core x 10 sq.mm. (laid in trenches, ducts, pole, wall etc.) complete all as specified and as as directed by engineer in charge. Notefor Item No 49 to 56: (i) Necessary test results like continuity test, megger tests, shall be submitted to Engineer-in-Charge before the cable is laid. (ii) Excavation earth work will be measured and paid separately.

Supply & lay GI Pipe 100 mm medium grade in the trench crossings/obstructions for cable protection, including cutting of existing road and making good the disturbed surfaces all as specified & directed.

Supply and laying HDPE DWC pipe of size 160 mm(OD) x 135mm (ID) along with connected accessories like couplers, bends, end caps etc. for LT/ HT cable protection complete all as specified and as directed by engineer in charge.

Supply and laying HDPE DWC pipe of size 120mm(OD) x 103mm (ID) along with connected accessories like couplers, bends, end caps etc. for LT/ HT cable protection complete all as specified and as directed by engineer in charge.

Supply and laying HDPE DWC pipe of size 50mm(OD) x 38mm (ID) along with connected accessories like couplers, bends, end caps etc. for LT/ HT cable protection complete all as specified and as directed by engineer in charge.

Supply and laying HDPE DWC pipe of size 40mm(OD) x 32mm (ID) along with connected accessories like couplers, bends, end caps etc. for LT/ HT cable protection complete all as specified and as directed by engineer in charge.

Supply and Fixing of outdoor LT Panel / LT Pillar Box including taking down old unserviceable one of minimum dimensions 1.8m x 1.4m x 0.6m size with following specifications. Fabrication Details : CPRI approved Main frame 3.15mm thick CRCA sheet, partition sheets / covers / doors of 3.15 mm thick CRCA sheet, gland plates 3.15 mm thick MS sheet (undrilled) including PCC foundation, base frame on ICMS channel with provision of incoming and outgoing cable entry at the bottom for outdoor installation, free standing floor mounted with degree of protection IP- 65 and locking arrangements. Bus bar details : Material shall be alluminum bus bar, sleeving heat shrinkable type, with bus bar sizes for phase 50mmx20mm aluminium Flat, neutral 50x10mm aluminium flat and bus bar support of epoxy type. Painting Detais : Pillar box shall be powder coated and painted with two coats of synthetic enamel spray paint over a coat of redoxide primer.

Accessories for Pillar Box : 0-500V Digital voltmeter - 01 No and 0-630V Digital Ammeter - 01 No(0-500A), (Flush type) and Indication Lamps (LED) - 03 No. make: L&T /Binay /Elmeasure (a)Incomer:- (i) 400A 4 pole , changeover of -01no. (ii) 400A 4 pole , MCCB - 01no. (b)Outgoings :- (i) 250A, 4-pole MCCB - 03 nos. (ii) 160A, 4-pole MCCB -04 no. (iii) 125A, 4-pole MCCB -03 no. Location: HQ ANC Note: (i) All MCCBs should be of adjustable over load 80-100%, with thermal magnetic release Ics=100%Icu, suitable for any type of loads. (ii) Quoted rate is deemed to be includes cost of MCCBs, Volt meter, Ammeter, Idiction lamps, Change over switches and connected control wiring with 2.5Sqmm FRLS copper conductor and necessary spreader links, lugs,glands and connecting of cables complete all as specified as per site conditions and as directed by Engineer-in-Charge.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm,Indoor/Outdoor type complete all as specified and directed.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ core XLPE, armoured, Al conductor cable of size 70 to 95 sqmm,Indoor/Outdoor type complete all as specified and directed.

Disconnecting old servieable / unservieable LT UG cables of size 3.5 core 16 to 120 sq mm and draw out from the pipe, wall or in under grond from junction boxes near CG junction to different feeders/ poles near valley view including re laying the same in trenches or in walls with necessary clamping all as specified and as directed by Engineer-in-Charge. Note:Necessary excavation will be measured and paid separately.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specifed and directed.

Supply, install, test & commissioning of Split type air conditioner, 2.0 TR capacity, BEE 5-Star rating, having cord less remote control unit, wall mounted inverter type with built-in ioniser and plasma filter for better air quality, copper condenser, electric driven, single phase, 240 volts, 50 Hz, AC supply including transporting to site, fixing of indoor and outdoor units with necessary wall mounting brackets, necessary copper piping connections, cutting, bending, brazing, proper insulation on copper pipe and all other pipes, PVC drain pipe upto ground level, installation complete with all accessories including connecting electrically between indoor and outdoor units with suitable size of PVC insulated multistranded copper conductor, complete all as specified and as directed. Make:- Blue Star Model No IA524DNU/Hitachi Model No RASG522PCB1SF/ Daikin Model No ACJTKJ35U NOTE:1. The quoted rate deemed to include the cost of all extra connected coper pipes . 2. The drain out water pipe connection should be connected up to ground level. 3. The Airconditioners shall be procurred from a local dealer with a local service set up as a back up for emergency rectifications.

Supply, install, test & commissioning of Split type air conditioner, 1.0 TR capacity, BEE 5-Star rating, having cord less remote control unit, wall mounted inverter type with built-in ioniser and plasma filter for better air quality, copper condenser, electric driven, single phase, 240 volts, 50 Hz, AC supply including transporting to site, fixing of indoor and outdoor units with necessary wall mounting brackets, necessary copper piping connections, cutting, bending, brazing, proper insulation on copper pipe and all other pipes, PVC drain pipe upto ground level, installation complete with all accessories including connecting electrically between indoor and outdoor units with suitable size of PVC insulated multistranded copper conductor, complete all as specified and as directed. Blue Star Model No IA524DNU/Hitachi Model No RASG512PCAISF/ Daikin Model No MTKM350 NOTE:1. The quoted rate deemed to include the cost of all extra connected coper pipes . 2. The drain out water pipe connection should be connected up to ground level. 3. The Airconditioners shall be procurred from a local dealer with a local service set up as a back up for emergency rectifications.

Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI strip 32 mm x6 mm as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion.

M&L for Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI eath wire of 4mm dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion.

Prasur Electricals & Engineering Co. (BID ID -3271615)

M/S ISLAND REALCON INDIA PVT. LTD (BID ID -3266025)