Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹9.8 LAccepted-AOC MALERKOTLA DIST SANGRUR | 1 | Accepted-AOC L1 | |
| 2 | 2₹10.0 L+₹16,312 (1.67%)Rejected-Finance MALERKOTLA ROAD KARKHANA NO 1 DHURI DISTT SANGRUR | 2 | Rejected-Finance L2 |
Tender Value
₹9.9 L
EMD Value
₹19,900
Closing Date
19 Nov 2020, 5:00 pmClosed
Executive Engineer
Water Supply and Sanitation Division Malerkotla
REPLACEMENT OF MACHINERY CONTROL PANEL REPAIR OF PUMP CHAMBER OHSR and WATER WORKS NEW DISINFECTION UNIT AUTOMATED WATER CONTROLLER NEW WATER CONNECTIONS PandL PIPE LINE and SIGN BOARD PAINT ETC
2020_WB_56122_1
100-WSSD/MALERKOTLA/EE/2020-21
Open Tender
Civil Works
Item Rate
90 days
Malerkotla
Please refer Tender documents.
4 documents required · 4 mandatory
₹1
₹19,900
8 Jan 2021
12 Nov 2020
20 Nov 2020
12 Nov 2020
19 Nov 2020
12 Nov 2020
Amount
Component -1
Providing and installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed make capable of delivering 535 LPM against a head of 86 mtr (20 BHP) along with including M.S. Column Pipe of suitable size 100mm=51 mtr (Prop. 3 mtr, rep. 15 mtr. exist 33 mtr.) (in 3 mtr lengths each with flanges, screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable (reputed make) complete in all respect as per standard Specifications. Including cost of sub. cable 6mm2 = 120mtr.
Repair of Electric Panel Board complete in all respect.
Repair of Pump Chamber
White washing scraping inside of Pump Chamber.
Scraping of snowcem robbiacem etc.
White washing 2 coat inside of Pump Chamber.
Finishing wall with exterior decorative cement based paint such as snowcem robbiacem etc. on old work one coat to give even shade.
Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint.
Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.
Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete. Inside pump Chamber.
Distempering with dry distemper of approved manufacture one coat on old distempered work.
Applying priming coat with methal primer on new steel or iron work incluing preparation of surface and Painting one coat with ready mixed paint for metallic surfaces in all shades on old steel or iron works.
Conglomerate floor 50mm thick cement concrete rate 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling
Supplying & fixing glass panes including special metal sash putty of approved make.
Repair of tile terracing complete in all respects
RCC open Slab
Repair of electric fitting.
Repair of OHSR
Repair of Expansion Joint. Size 100 mm i/d complete in all respects.
P/F OHSR Jali complete in all respects.
Repair of Water Works
Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects
Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing D-8 & (as per Analysis A-6).
Repair of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3 & Analysis A-5.
Conglomerate floor 40 mm cement concrete topping 1:2:4 for foot path.
Providing, installing, testing & commissioning one no. Electrically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleching powder solution/ sodium hypo solution per hour under maximum delivering pressure upto 7 kgcm^2 and suction lift not less than 1.5m as per DWSS standard Specification.
Repair and minor Replacement of existing pipe line
Provision for making new connection with exit pipe line as per analysis A-20 complete in all respects.
Providing, Stringing out, cutting, Jointing and testing of ISI Marked C.I. Pipes Class-LA per IS:1536 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage. (for C.I. fitting)
80mm i/d pipe line laid complete
Automated water controller switch to start or stop the pump based on water reservoir level complete in all respects.
Improvement in exisitng connections
Repair of old house connections complete in all respects.
Component -2
Providing proposed water connection on existing pipe line to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.
Component -3
Providing, Laying, fixing & jointing of PVC Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including excavation & back filling complete as per specifications for more than 3 mtr street width included excavation.
PVC pipe 63mm o/d 6Kg/sqcm
Dismantling of cement concrete 80mm thick cement concrete 1:2:4 over 100mm thick C.C. 1:8:16 and making good the same to its original condition complete in all respects as per analysis A-25.
PVC pipe 63 mm o/d
Providing proposed water connection to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.
Painting on Board both sides including priming coat , printing & Map as per Water Supply & Sanitaton standard.
Cost of Component-4 (Operation and maintenance)
Provision for sodium chloride for disinfection of water Complete in all respect.
Credit of old machinery complete in all respects:-
BALJIT KUMAR CONTRACTOR
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .