SPECIAL REPAIR M O TO BOUNDARY WALL CHAIN LINK FENCING AND ALLIEED WORKS AT E M INSTALLATIONS AT NAGZEERA AND LAXMI TEK AND PROVISION OF ONE TOILET CUM BATHROOM NEAR GUARD POST NO 5 AT COD TRG AREA OF HQ JL WING ,THE INF SCHOOL UNDER GE BELGAUM

Amount

Dismantling fencing posts or struts (wood,steel or RCC) any section including taking out embedded portion in natural ground and making good disturbed ground complete all as specified and as directed.

Material and labour for Rolled mild steel angle sections fixed independently without connecting plates etc and embeded in concrete posts and struts in fencing including securing bolts including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets for securing wire mesh etc confirming to Fe 410-W (Gde E-250) quality -A complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position including cutting reinforcement as required to facilitate demolition including removal of debris not exceeding 100 metres complete all as specified and as directed.

Material and labour for Reinforced cement concrete 1:2:4, type B1, using 20 mm graded stone aggregate in foundations including raft footings ,foundation beams.plinth beams ,bases for columns etc complete all as specified and directed

Material and labour for Reinforced cement concrete 1:2:4, type B0, using 20 mm graded stone aggregate in columns,pillars ,posts and struts etc complete all as specified and as directed

Material and labour for Use of Steel form work to sides of concrete foundations, column footings, bases of columns and soffits of foundation if any and plinth/raft beams and similar works with rough finished concrete surfaces, vertical or to batter complete all as specified and as directed.

Material and labour for Use of Steel form work to sides of pillars ,struts,piers,columns ( Rectangular or Square ) and similar works with rough finished flat concrete surfaces complete all as specified and as directed.

Material and labour for Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed

All as described in item No. 08 here in before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

Material and labour for Plain cement concrete type D2 1:4:8 using 40mm graded stone aggregate as in foundation filling and mass concrete ,levelling courses and sub base etc complete all as specified and as directed.

Material and labour for Plain Cement Concrete 1:3:6 Type C1 (using 20 mm graded stone aggregate) in coping ,bed blocks etc including necessary steel form work moulds and finished fair and even complete all as specified and as directed.

Material and labour for Providing Pre cast cement concrete louvers and jallies 1 :2:4 Type B0 using 12.50 mm graded stone aggregate set in cement mortar 1 :4 , 35 mm thick (measured solid ) including all mouldings but excluding frame of any description and size complete all as specified and as directed.

Supply only MS galvanised chain link fencing, any mesh, size and type all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type, fixed to any type of standards, rails, straining bolts, etc. including provision of binding wire including dismantling of fencing wire mesh ,any type and taken as credit complete all as specified and directed.

Material and labour for Mild steel TMT round bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed

Demolition of PCC block masonry of any description built in cement mortar and removal of debris not exceeeding 100 metres complete all as specified and as directed.

Material and labour for Precast cement concrete block masonry Type C1 1:3:6 (using 20 mm graded stone aggregate ) with Solid blocks exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Material and labour for 5 mm thick in cement mortar 1:4 over a coat of 10 mm thick rendering in cement mortar 1:6 on fair faces of PCC block walling or concrete surfaces and finishing the surfaces fair and even using water proofing compound complete all as specified and directed.(Note:Water proofing compound will be measured and paid seperately

Material and labour for 5 mm thick in cement mortar 1:4 over a coat of 10 mm thick rendering in cement mortar 1:6 on fair faces of PCC block walling or concrete surfaces and finishing the surfaces fair and even using water proofing compound including taking down old cement plaster on brick or stone wall built in cement mortar complete all as specified and directed.(Note:Water proofing compound will be measured and paid seperately

Material and labour for Preparation of newly plastered wall surfaces ,pilasters ,cornices etc and applying two coats of cement based paint over a coat of chalk whitening primer complete all as specified and directed.

Supply only Water proofing compound .Make :Impermo/Roff/Cico

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation, etc. and getting out in hard/ dense soil complete all as specified and as directed.

Returning filling in with approved excavated soil including spreading levelling, watering and well ramming in layers n. exc. 25 cm thick all as specified and as directed..

Removing excavated soil n.exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point in soil all as specified and as directed.

Demolition of cement concrete in ground floors not exceeding 15 cm thick unreinforced including removal of debris not exceeding 100 metres complete all as specified and as directed.

Material and labour for 25 mm thick Plaincement concrete 1:2:4 Type B1 (using 20 mm graded stone aggregate) as in sub base of flooring complete all as specified and as directed.

Material and labour for Rubber coated chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, with grey cement and pigments with glossy finish on top, set, jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etcand dismantling of existing unserviceable tiles of any description and taken as creditcomplete all as specified and directed.

Material and labour for 75 mm thick Plaincement concrete 1:3:6 Type C1 (using 20 mm graded stone aggregate) as in plinth protection including finishing the surface even and fair and necessary form work complete all as specified and as directed.

Material and labour for 75 mm thick Plaincement concrete 1:4:8 Type D1 (using 40 mm graded stone aggregate) as in sub base of flooring complete all as specified and as directed.

Material and labour for Preparation of old cement painted wall surfaces ,pilasters ,cornices etc and applying one coat of cement based paint complete all as specified and directed.

Material and labour for 55 to 60 mm thick Machine pressed precast concrete interlocking coloured paver blocks, M-35 grade, any shape and size with GLOSSY FINISH with grey cement and pigments, confirming to IS 15658-2006 including dismantling of existing unserviceable tiles of any description and taken as credit complete all as specified .

Material and labour for 80 mm thick Machine pressed precast concrete interlocking coloured paver blocks, M-40 grade, any shape and size with GLOSSY FINISH with grey cement and pigments, confirming to IS 15658-2006 including dismantling of existing unserviceable tiles of any description and taken as credit complete all as specified .

Material and labour for 50 mm thick crushed stone sand (M-sand/ Robo Sand/i-Sand) filling under interlocking paver blocks including watering and consolidation complete all as specified and as directed.

Material and labour for Machine cut granite Black stone slab, premium quality, any colour, 18 to 20mm thick, set and jointed with neat cement slurry laid over and including 12mm thick backing coat in cement mortar 1:3 and pointed in white cement (1:2) mixed with colouring pigments to match with the shade of slab and including rendering 12 mm thick cement mortar 1:4 on concrete surface/PCC block masonry as in claddings, etc including dismantling of existing unserviceable tiles of any description and taken as credit complete all as specified .complete all as specified and as directed.

Supply and fix 80mm bore galvanized iron tubes, light grade, with all fittings, fixed into pillars/ columns as in mechanical protection to cables and fixing for LED Post top lantern on the top of RCC pillar complete all as specified and as directed. Note : Make of GI Pipe : TATA/JINDAL/Prakash Surya

Material and labour for Preparation of old steel or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed..

Material and labour for Preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

.Dismantling wrought iron or mild steel work of any description and taken as credit complete all as specified and as directed.

Material and labour for Rolled mild steel framed work as in doors or gates of angle or other section with gusset plate, rails, braces etc complete, prepared for hanging or sliding with and including either hook or hinges and hanging fastening and fixing complete conforming to Fe 410W (Gde E-250) all as specified and directed.

Material and labour for Rolled mild steel framed work as in doors or gates (Ornamental Type intricate design ) with pintel hinges ,stops, hand made sliding bolts all as per sample approved by GE complete all as specified and as directed.

Material and labour for Rolled mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165 all as specified and as directed.

Material and labour for Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPs as in roof covering/cladding to wall fixed with self tapping screws and washers including dismantling old plain or corrugated steel sheeting of any gauge and taken as credit complete all as specified and directed.

Material and labour for Pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mps as in roof covering/cladding .Ridge valley gutter fixed with self tapping screws and washers including dismantling old plain or corrugated steel sheeting of any gauge and taken as credit complete all as specified and directed.

Material and labour fot Rolled mild steel angle iron section for roof trusses (Framed) and purlins including distance pieces ,cleats etc conforming to Fe 410W (Gde E-250 quality- A ) complete all as specified and as directed.

Excavation in post holes each not exceeding 0.50 Cum and getting out ,returning ,filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm thick in hard/dense soil complete all as specified and as directed.

Material and labour for Plain cement concrete type D2 1:3:6 Type C2 using 40mm graded stone aggregate as in foundation and mass concrete all as specified and as directed.

Material and labour for Moorum/red bajri filling in floors or paving, laid in layers n exc 15cm thick, spread levelled and rammed including watering all as specified and as directed.

Material and labour for Plain Cement concrete type B-0, 1;2;4 (Using 12.5mm graded aggregate ) as in damp proof course 25mm thick using water proofing compound including necessary form work all as specified and as directed.

Material and labour for Hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfaces all as specified and as directed.

Material and labour for Premium quality Non skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match shade with joint free non skid tiles, over screed bed 15mm thick in cement mortar 1:4 all as specified and as directed.

Material and labour for Premium quality glazed ceramic coloured tiles of size 350x250x7mm/450x350x7mm in skirting/dado etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces over and including rendering 10 mm thick in CM 1:4 on stone masonry walls as in backing coat of skirting, dado etc all as specified and as directed.

Supply and fix Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

Material and labour for Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPs as in roof covering/cladding to wall fixed with self tapping screws and washers complete all as specified and directed.

Material and labour for Pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mps as in roof covering/cladding .Ridge valley gutter fixed with self tapping screws and washers complete all as specified and directed.

Supply and fix Mild steel section for hold fasts, wind ties etc confirming to Gde Fe 290 (Gde-E-165 ) complete all as specified and directed.

Material and labour for Preparation of new steel surfaces of any description n exc 10 cm width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for Reinforceed cement concrete 1:2:4 type B1 (20mm graded aggregates) as in beams, cantilever and lintels over 1.5 m span etc or similar items all as specified and as directed.

Material and labour for Reinforceed cement concrete 1:2:4 type B1 (20mm graded aggregates) as in chajja or similar items complete all as specified and directed

Material and labour for Use and waste of form work for rough finished surface to side & soffit of beams, bressmers, cantilevers,and supports etc complete all as specified and directed.

Material and labour for Use and waste of form work for Chullah hoods,Chajjas,troughs and similar item includind edges etc complete all as specified and directed.

Material and labour for 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 surface finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for Preparation of newly plastered brick work or concrete surfaces and applying three coats of white wash complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 surface finished even and smooth without using extra cement with water proofing compound complete all as specified and directed.

Material and labour for Preparing of newly plastered brick work or concrete surfaces and applying two coats of cement paint white or tinted paint on walls over a coat of primer complete all as specified and directed.

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelaminated PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheets on both sides to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed

Supply and fix Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.18 mm fixed with tinned tack or galvanised wire stapplescomplete all as specified and directed

Supply and fix Stainless steel butt hinges medium weight 100mm size fixed with CP screws complete all as per specified and directed.

Supply and fix 150 mm long extruded section aluminium alloy anodised handles fabricated type complete all as specified and directed.

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and directed.

Supply and fix Aluminium alloy anodised sliding door bolt 300mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as directed.

Supply and fix 1000 litres capacity Rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including 20mm PTMT float valve including Supply and erect,connect pipe line inlet outlet etc and making holes for inlet, outlet and over flow pipes, hoisted and fixed in position and testing complete all as specified and directed.

Material and labour for Plain cement concrete type C2 1:3:6 (40 mm graded aggregate )75 mm thick in plinth protection and finishing the cement concrete surface even and smooth without using extra cement including necessary form work complete all as specified and directed.

Supply and fix vitreous china Orissa pattern IWC size 580x440 mm white with integral foot rest complete including P or S trap including provision of lime concrete bedding complete all as specified and directed.

Supply and fix 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and directed..

Material and labour for PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia outlet complete all as specified and as directed.

Supply and fix PVC grating of 150mmSize (Paryag)

Supply and fix PVC (SWR) gully trap 125/110mm, setting & jointing with solvent cement complete all as specified and directed

Supply and fix 110 mm dia PVC (SWR) vent cowl

Supply and fix PVC connections 15 mm size with PTMT nuts ,size 600mm long complete all as specified and directed.

Supply and fix tubular towel rail 600mm long of CP brass fixed with and including CP brass screws and plastic cleats (Minimum weight 160 gms ) complete all as specified and directed.

Material and labour for PVC flushing cistern low level white 10 litre capacity with inlet ball valve float and handle including brackets, PVCflush pipe 32mm dia for low level cistern etc and connections to pipes complete all as specified and directed.

Supply and fix unplasticised PVC (UPVC) pipe 20mm bore of pressure rating 10 Kgf/cm2 with all fittings & fixed complete to walls, ceilings or laid in floors complete all as specified and directed.

Supply and fix unplasticised PVC (UPVC) pipe 25mm bore of pressure rating 10 Kgf/cm2 with all fittings & fixed complete to walls, ceilings or laid in floors complete all as specified and directed.

Supply and fix unplasticised PVC (UPVC) pipe 15mm bore of pressure rating 10 Kgf/cm2 with all fittings & fixed complete to walls, ceilings or laid in floors complete all as specified and directed.

Supply and fix 15mm bore stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

Supply and fix Gun metal gate valve with iron wheel head screwed boh ends for pipe of size 25mm and fixed complete all as specified and directed.

Supply and fix Pillar taps 15 mm dia cast copper alloy, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

Supply and fix bib taps 15 mm dia cast copper alloy, chromium plated with crutch or butterfly handle screwed down ,screwed for iron pipe and fixed complete all as specified and directed.

Supply and fix vitreous china urinals bowl type (back or corner wall type), of size 465mm x 355mm x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

Supply and fix PVC connections 15 mm size with PTMT nuts 450mm long complete all as specified and directed.

Supply and fix Brass chromium plated overhead shower with shower arm flange, with swivel joints fixed to 15mm bore steel pipe, fixed in repairs, all as specified and as directed. Make : Hindware Overhead Shower With Shower Arm & Wall Flange(Project) - F160039 complete all as specified and directed.

Supply and fix Corner glass shelf, 5mm thick, 9" wide, fixed with suitable mild steel CP brackets, nuts & bolts complete all as specified and as directed. Make: Jaguar /Metro

Supply and fix 110 mm bore PVC (SWR) pipes any length and in any position with rubber ring joints laid in treches/floors etc complete all as specified and as directed

Supply and fix 75 mm bore PVC (SWR) pipes any length and in any position with rubber ring joints laid in treches/floors etc complete all as specified and as directed

Supply and fix PVC (SWR) bends 110 mm dia

Supply and fix PVC (SWR) bends 75 mm dia

Material and labour for Chequered cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floorsover and including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified & directed.

Material and labour for Granite tiles 20mm thick machine cut as in partition, platform etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing overcement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and directed.

Material and labour for PCC 1:4:8 type D-2 ( using 40mm graded aggregate) to drain pipes including packing under & haunching against the sides of pipe after they are laid & tested etc for 150mm dia SGSW pipe line, jointed in cement mortar complete all as specified and directed .

Material and labour for Salt-glazed stoneware drain pipes laid in trenches and jointed in cement mortar .of 150mm dia complete all as specified and directed .

Material and labour for PCC , 1:2:4 type B-1 ( using20mm graded aggregate) as in channel and benching including necessary form work complete all as specified and directed .

Extra for forming Fair finished drain or channel 25CM inner girth in cement concrete using extra cement including forms, moulds etc.

Material and labour for Rendering 15mm thick other than fair faces of brick/block masonry work in CM 1:4 and finished even & smooth without using extra cement complete all as specified and directed .

Material and labour for Rendering 15mm thick on faces of brick/block masonry work in CM 1:6 and finished even & smooth using extra cement complete all as specified and directed .

Material and labour for Precast cement concrete manholes cover in 1:2:4 type B-1 , using 20mm graded aggregate and set in CM 1:6 including necessary form work/moulds etc complete all as specified and as directed.

Material and labour for Point wiring 1.5 Sqmm single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cables drawn through PVC casing capping of suitable size with all necessary fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular PVC surface box fixing on wall with and including white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way complete all as specified and as directed. Note :(i) Make of PVC copper cable : Finolex/Polycab/RR Kabel (ii) Make of PVC Casing /capping : Avon Plast/Presto Plast/ Garware

All as described in item No. 109 here in before but for one fan/exhaust fan point controlled by one switch and regulator.

All as described in item No. 109 here in before but for one 05 Amps socket outlet on independent board.

All as described in item No. 109 here in before but wiring with 2.5 Sqmm FRLS PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductor FRLS PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

Supply and fix Modular switch piano type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor/ Legrand/crab tree

Supply and fix Modular switch piano type 16 Amps flush button 230 volts AC one way complete all as specified and as directed. Make -Anchor/ Legrand/crab tree

Supply and fix Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed. Make -Anchor/ Legrand/crab tree

Supply and fix Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed. Make -Anchor/ Legrand/crab tree

Supply and fix Ceiling rose 3 phase/PVC/ Poly carbonate ,isolated body suitable for 230 volts AC supply, complete all as specified and as directed.

Supply and fix LED lighting fixture with aluminium heat sink energy efficient 10 watt LED 6K fitting complete all as specified and as directed. Make: Wipro Garnet 10W or equivalent price and specification in CG/Philips

Supply and fix Integral LED 25 watts security light fitting comprising of pressure die cast aluminium housing with high power LEDs & electronic driver incl GI pipe med grade & bracket of suitable size fixed to pole /wall complete all as directed . Make : Crompton Astra Neo Cat Part No:LSTS-25-CDL or equivalent price and specifiaction in Philips/Wipro

Supply and fix Exhaust fan, 250 mm sweep, 230 Volts, single phase, heavy duty with necessary grouting and fixing arrangements and provision of 3 core PVC flexible copper conductor cable of size 1.5sqmm size from ceiling rose to connector of exhaust fan all as specified as directed. Make: Bajaj/Khaitan.

Supply and fix Sheet metal enclosure type TPN Vertical Loadline DBs fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB) 12 Way with double door type and including provision of 2nd class hard wood board with sunmica top of suitable size fixed to wall and fixing of the MCB DB on board complete all as specified and directed. Note : Make :IndoAsian/Legrand/ L&T

Supply and fix MCCB TP 125 A , Breaking capacity 25KA 50HZ AC supply complete all as specified and directed. Note : Make :Siemen/Schneider/ABB

Supply and fix Sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar double door type and including 2nd class hard wooden board 4cm depth with sunmica top of suitable size to fix the MCB DB, complete all as specified and as directed. Note : Make :IndoAsian/Legrand/ L&T

Supply and fix MCB DP 63 A 10KA C series 50HZ AC supply complete all as specified and as directed. Note : Make :IndoAsian/Legrand/ L&T

Supply and fix MCB SP 240 Volt of capacity 5 to 32 Amps‘C’ series, complete all as specified and as directed. Note : Make :IndoAsian/Legrand/ L&T

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance all as specified and as directed.

Supply , lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core laid in trenches/floors/walls etc complete all as specified and directed. Note : Make :Gloster /CCI/ Asian

Material and labour for Double wall corrugated HDPE pipes , ISI marked 63 mm outer dia as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc complete. all as specified and directed.Note :Make : Finolex/Supreme/Vectus

Supply and fix GI pipe light grade 50mm dia with all fittings & fixed complete on pole/walls/in road etc for cable protection complete all as specified and directed. Note : Make : TATA/JINDAL /Prakash Surya

SHRI.H.R.PATIL

DHANSHRI ENTERPRISES

M/S JAYDEEP CONSTRUCTION

M/s. N D KALING

M/s.Y.N.PATIL

ASHOK M RAJGOLKAR

ASHIRWAD ELECTRICALS