Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹97.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹1.0 Cr+₹4.4 L (4.47%)Accepted-AOC NA | NA | NA | 121004 | L2 | Accepted-AOC L2 | |
| 3 | L3₹1.1 Cr+₹9.4 L (9.63%)Accepted-AOC | L3 | Accepted-AOC L3 | |
| 4 | L4₹1.2 Cr+₹24.4 L (24.9%)Accepted-AOC | L4 | Accepted-AOC L4 |
Tender Value
Refer Docs
EMD Value
₹2.7 L
Closing Date
22 Jun 2023, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE
Office of SE M.G.C.C.C-1,Mrt
02/SE/MRT/2023-24(LOT1)
2023_UPIDC_811369_1
02/SE/MRT/2023-24
Open Tender
Civil Works
Item Rate
90 days
MEERUT
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,354
₹2.7 L
Yes
29 Aug 2023
12 Jun 2023
22 Jun 2023
12 Jun 2023
22 Jun 2023
12 Jun 2023
Amount
PART-1 (Maintinace and repair of regulators of Lakhawati Branch)
Greasing oiling of component of lifting mechanism of gates (excluding rollers) after proper cleaning with replacing Grease cup/ Grease Nipple as required including cost of all material , labour and T & P etc. required proper completion of work as per direction of Engineer in charge.
Welding in angles, plates, sheets of regulator required proper completion of work as per direction of Engineer in charge.
Providing and fixing iron work for regulator required for proper completion of the work. And direction by Engineer in Charge
Providing and fixing iron work for regulator railling and stair railling required for proper completion of the work. And direction by Engineer in Charge
Painting on old rusted steel surface of gates and appurtenances after preparation of surface properly by sand blasting process and applying two coat of Zinc Rich primer and two coat of solvent less epoxy paint including cost of all material , labour T & P and scaffolding required for proper completion of work as per upid sor chapter xx item 01 required proper completion of work as per direction of Engineer in charge.
Replacing of musical note type side rubber seal as per IS code 11855 by removing old damaged side rubber seal from gate , scraping & cleaning surface , making holes feding and clamping the M.S plate by new counters sunk head high tensile bolts , nuts and washer , making adjustment as per requirement of site including cost of all material labour and T & p required for proper completion of work for size 120 X 12mm note dia 45mm required proper completion of work as per direction of Engineer in charge.
Reparing of guide roller ( side sway roller ) by taking our defective guide roller from gate . Rethreading of foundation hole after extrancting broken foundation bolts . Repairing of pin by remetaling by welding , machining of roller shaft assembling the guide roller and fitting on gates with new foundation bolt and new rubber bushes and necessary oiling and greasing including cost of all material , labour , T & P test and trial etc required 1 for proper completion of work.
Applying cardium compound on steel wire rope , teeth of drum gear and pinion of gate after proper cleaning including cot of all materail , labour , T & P and scaffolding with safety arrangement required for proper completion of work for gate up to 8.0 M required proper completion of work as per direction of Engineer in charge.
Replacing filling gear oil in Radicon Reduction Gear Box ( radicon or flaxon unit ) after proper cleaning including cost of all materials, labour T & P etc requirred for proper completion of work for gate up to 8.0 M required proper completion of work as per direction of Engineer in charge.
Providing and fixing of sign board including cost of all materials, labour, t&p etc. (At Regulator)
PART-2 (Renovation of store with chawkidar room for regulation of regulator of lakhawati branch )
Excavation in foundation in ordinary soil (lome,clay or sand) including lift upto 1.50M and lead upto 30M. And including filling watering and ramming of Excavated earth ito trenches or into the space between the building and the side of foundation treches or into the plinth and removal and disposal of surplus earth as ditected by the engineer - in - charge upto a distence of 30M. from the Foundation trenches . for buliding work only .
cement concrete with 40mm gague Stone grit ,fine sand and cement proportion of(1:5:10) including supply of all material ,labour,tools and plants etc
2.5 cm thick DPC with cement , coarse sand and 20 mm approved grit consisting 1:1.5:3 including water profing materials as orderd by the engineer in charge in the proportion as specification by the manufacture .(S.I.No.361 UP PWD BULANDSHAHR CIRCLE)
M-150 Brick 1:4 cement and coarse sand f.m of 2.20 (1 cement :4 C/A) mortar in foundation, plinth level & Super structure including supply of all materials,labour and T&P .required for proper complition
12mm plaster with cement and fine sand of 1.25 F.M in 1:4 over brick work minimum thickness not be less than 1 cm. including supply of all materials,labour,tools & plants etc. required for proper coomplition of the work
Centering & Shuttering for RCC/RB work including cost of centering & shuttering upto 4.50 m height
R.C.C. 1:1.5:3 nominal mix with cement coarse sand and stone agg i/c all cost of material labour T & P etc
M.S.(tor steel or plain ) in plain work such as R.C.C or R.B.C work including bending for proper shape as necessary including bending proper complition of work and including supply of all materials
Sand filling in plinth including supply of necessary sand from a distance not exceeding 8km from the site of work and including watering dressing etc, labour and T&P etc required for the proper completion of work. Sapling of girth upto 30 cms measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50m outside the periphery of area cleared.
Providing Birla putty on new interior or exterior surface over one coat of water based cement primer or ICI or equivalent brand for smoothening & leveling of the surface as per requirement and direction of engineer in charge including cost of all materials & T&P required for completion.
Distemper two coat with oil bound distemper of approved brand and manufactrue and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primery of approved brand such as Berger , J& K , Shalimar , Asian Paints after thorought brushing the surface free from mortar Dropping and other foreingn matter and also including the surface even with plast of paris or approved sysnthtic materials and also including supply of materials , labour , tools & plants etc. required for proper complitions.(S.I.No. 649+650 UP PWD BULANDSHAHR CIRCLE)
Finishing wall with one coat of water proof cement paint of approved quality on new surface with two coat to give an even shade including supply of all materials, lanour, tools & plants etc required for proper completion of work. For weather coat (Asian or Berger brand) As per PWD SOR Ch No-15, Item no 660 New Item
Supply and fixing doors including materials,labour,tools,all fittings,paints,polish and plants etc. required for proper complition
Supply and fixing window including materials,labour,tools,all fittings,paints, polish and plants etc. required for proper complition
S/F 10 mm thick glazed/matt finished tiles of size 600x600 or more of approved company like RAK, JOHNSON, SOMANY or equivalent make of approved shade, colour and pattern as directed by engineer incharge in floor, skirting or dado laid with 1:3 cement and course sand mortar with approved quality adhesive finished with white cement and pigment to made the tile shade etc, complete including supply of all material, labour and T&P required for completion of work.
Providing and fixing water closet squatting pan ( Indian type W.C pan) with 100 mm sand cast iron P and S trap,10 liter low level white PVC flushing cisten , including flush pipe , with manualy controlled devise (handle level) conferming to IS:7231,with all fitting and fixtures complition,including cutting and making good the walls and floors wherever required (S.I.No. 17.1.1 CPWD 2021)
Providing and fixing soil, waste and vent pipes :100 mm dia 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 (S.I. NO17.35.1.1 D.S.R 2021)
Providing & laying 60 mm thick factory made cement concrete interlocking paver block M30 grade made up of block making machine with strong vibratory compactor of approved size design & shape laid in required colour & pattern over and include 50 mm thick compacted bed of course sand , filling the joints with line sand etc, all complete as per direction of engineer incharge. As per DSR 2021 Item no- 16.68.
Excavation in foundation in ordinary soil (lome,clay or sand) including lift upto 1.50M and lead upto 30M. And including filling watering and ramming of Excavated earth ito trenches or into the space between the building and the side of foundation treches or into the plinth and removal and disposal of surplus earth as ditected by the engineer - in - charge upto a distence of 30M. from the Foundation trenches . for buliding work only . (septic tank)
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :Cement mortar 1:3 (1 cement : 3 coarse sand) (S.I. NO 6.12.1 D.S.R 2021)
12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand)(S.I. NO 13.7.1 D.S.R 2021)
Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m.
R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarsesand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-incharge (cost of earth works in excavation, concrete works in foundation to be paid separately).
Fencing with R.C.C. post placed at required distance, embedded in cementconcrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used.
MS or iron work in heavy sizes such as trusses, built up gates, record rackes, roof work, gates etcincluding rivetting, welding where necessary.PWD SOR Ch No-10, Item No-503
Supply and fixing of India Marka -II Hand Pump including cost of all materials, labour, T&p, etc. required for proper completion of work.
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit , with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. Group-A
Wiring of circuit/submain along wiring along with earth wire with the following sizes of FR PVC insulted copper coductor, single core in surface/ recessed, single core cable in surface/recessed medium class PVC conduit as required 2x4sqm, mm +1x4sqmm.earth wire.
Supply, Installation, Testingand Commissioning of on grid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/PolyCrystallinesilicon solar cells, netmetering facility, necessary protections, earthing, mounted on Aluminium/GIstructure of suitable strength with following components complete as required:- a) Solar Photovoltaic Module of capacity330 Wporabove, manufactured in India, conforming to IS14286/IEC61215,IS/IEC61730-Part-1,IS/IEC61730-Part-2.Solar Photovoltaic Module conversion efficiency shall not be less than16.5%.PV module sused in solar power plants/systems must be warranted for their output peak watt capacity,which should not be less than90%attheend of 10years and 80%at the end of 25 years. b) Power Conditioning Unit(PCU)of 350-800VDC Input voltage range and 400 VAC, three phase, 4wire, 50Hz+/2.5Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than3% and suitable for ambient temperature from 0to50degreeC. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP65 protection and termination arrangement for incoming and outgoing cable along withg lands, lug sand other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor1.1kVgrade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lug sand other accessoriesetc.as required.
PART-3 (Repairing of Dhalna regulator at km 52.200 of Lakhwati Branch)
Dismantling brick work or stone work and cement concrete in cement mortar and including stacking of material with in a distance of 60M as per direction of engineer-in-charge.
Ist class brick work 1:4 with cement & coares sand including cost of all material, labour, T&P etc complete.
C.C 1:1.5:3 (M20)nominal mix withcement coarse sand and stone agg. i/c all cost of materials labour T&P etc.
R.C.C 1:1.5:3 (M20)nominal mix withcement coarse sand and stone agg. i/c all cost of materials labour T&P etc.but excluding steel
Centering and suttering ordinary for CC/RCC work i/c all cost of material labour T&Petc.
Reinforcement steel for RCC work i/c bending,binding,cutting and placing with binding wire i/c cost of material and labour etc complete.
Struck deep cement pointing 1:2 C.M. / Sqm
Laying Dry brick on edge pitching and filling joint with local sand including cost of sand. / Sqm
Greasing, oiling of all components of lifting mechanism of Gate (excluding rollers) after proper cleaning with replacing grease cup/grease nipple as required including cost of all material, labour, T&P etc required for proper completion of work .
Applying cardium compound on steel wire rope, rope drum of gate after proper cleaning including cost of all material, labour, T&P and scaffolding with safety arrangement required for proper.
Replacing old damaged and unserviceable Central Hand Drive Unit with new Central Hand Drive Unit including cost of channels,couplings,plummer block with pedestal,rope drum, nut and bolts, material, labour, T&P etc required for proper.
Supplying and fixing go Drive Floating shaft including cost of all labour, material, T&P etc.for proper completion of work.
Supplying and fixing the Steel wire rope of 16 mm dia including cost of all material,u clamp,nut bolts, labour, T&P etc required for proper completion of work.
Repairing of guide roller (side sway roller ) by taking our defective guide roller from gate. Rethreading of foundation hole after extrancting broken foundation bolts.Repairing of pin by remetaling by welding,machining of roller shaft assembling the guide roller and fitting on gates with new foundation bolt and new rubber bushes and neccessary oiling and greasing including cost of all material, labour, T&P test and trial etc required 1for completion of work.
M. S. plate 10 mm thick after cutting old and damaged plate and measuring, marking, cutting by gas, making holes if required in chequered plate to the size as per requirement to site, shifting of chequered plate from ground to super structure plateform and welding gas electrodes and other required materials, labour and T&P required for proper completion of work.
Replacement of Bottom Rubber Seal as per size 80 x 20 mm by removing old damaged side rubber sea from gate, scraping & cleaning surface, making holes, fixing and clamping the M.S. plate by new counters sunk head high tensile bolts, nuts and washer, making adjustment as per required of site including cost of all material, labour and T&P required for proper completion of work .
Replacement of musical note tyape side Rubber Seal as per size 120 x 12 mm note dia 45mm by removing old damaged side rubber sea from gate, scraping & cleaning surface, making holes, fixing and clamping the M.S. plate by new counters sunk head high tensile bolts, nuts and washer, making adjustment as per required of site including cost of all material, labour and T&P required for proper completion of work .
Paintin of gates and appurtenances by applying 1 coat of red oxide zinc chromate primer and 2 coat of high build Black bituminous painting of standard make after proper cleaning, scrapping the surface including cost of material, labour T&P and scaffolding bridges with proper safety arrangement as required for proper completion of work.
Fabricating and decking on super structure of head regulator by M. S. chequered plate 6 mm thick after cutting old and damaged plate and measuring, marking, cutting by gas, making holes if required in chequered plate to the size as per requirement to site, shifting of chequered plate from ground to super structure plateform and welding gas electrodes and other required materials, labour and T&P required for proper completion of work.
Painting on old rusted steel surface of gates and appurtenances after preparation of surface properly by sand blasting process and applying two coat of Zinc Rich primer and two coat of solvent less epoxy paint including cost of all material,labour T&P and scaffolding required for proper completion of work.
Rectifying defective alignment of gate by adjusting length of steel wire rope and other allied work as required including cost of all material, labour, T&P, jigs and fixtures, scaffolding etc as required for proper completion of work.
Carriage and Erection of shutter assembly,lifting assembly and super structure gate.
M/S S R CONSTRUCTION
M/S SATT SAHIB CONSTRUCTION CO
MUKESH KUMAR SHARMA
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .