Estimate No. 797 /EE /AMT /2020_21, Providing Furniture for Newly Open P.W.D. Electrical Circle Offices Division offices and Sub, Division Offices at Various Districts in Maharashtra State.

Amount

Executive Table(Main table+Side Table+Pedestal)(2350 x 2350 x 750) Primary Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Secondary Work Surface-Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top .Soft closing access flap with in-build power box are provided on work surface for wire management. Modesty Panel- Made of 25mm thick MDF one side laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under- structure-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Integrated Pedestal- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening.Pedestal is provided with lock for security.

Back Unit (1800mm x 750 mm )Top Panel : Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Slide Door Unit : Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security.

Executive Chair (HB) SEAT ASSEMBLY : The Cushioned seat is made of Injection molded Plastic outer & inner. Plastic Inner is upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D) BACK ASSEMBLY: The Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather. *HIGH BACK SIZE : 47.5 cm. (W) x 77 cm. (D) ARMRESTS : The armrest top is moulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable ting mechanism is designed with the following features: • 360° revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing is made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT: Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT : Back Frame is connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.).TWIN WHEEL CASTOR : 5 Nos. twin wheel castors are injection moulded in plastic having 6.0±0.1cm wheel Diameter and assembled to pedestal.

Visitor Chair SEAT ASSEMBLY : The Cushioned seat is made of Injection molded Plastic outer & inner. Plastic Inner is upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D) BACK ASSEMBLY: The Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather.The armrest top is moulded from polyurethane(PU), upholstered in pure leather and mounted on to tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish. VISITOR TUBULAR FRAME : The tubular frame is cantilever type & made of 02.54±0.03 cm x 0.2±0.016 cm thk S.S 202 tube.The back connected to frame through chrome plated high pressure die cast connector piece.

Sofa(3 seater) SEAT FOAM‎: ‎The seat is made of PU ‎foam with Density ‎28‎± ‎2 ‎kg‎/‎cu‎.‎mtr having an ‎additional top layer of super soft ‎PU foam in Density ‎32 ‎± ‎2 ‎kg‎/‎cu‎. ‎upholstered with fabric ‎or leatherette‎. ‎BACK ‎FOAM‎: ‎The back is ‎made of PU foam with ‎Density ‎28 ‎± ‎2 ‎kg‎/‎cu‎. mtr with two additional ‎top layer of supersoft ‎ foam of density ‎32‎±‎2 ‎kg‎/‎cu‎. ‎mtr‎, ‎upholstered ‎ with fabric or leatherette .UNDERSTRUCTRE ‎: ‎Understructure is made ‎up of ‎1‎.‎2‎±‎0‎.‎1 ‎cm‎. ‎thick ‎hot pressed plywood ‎( moisture resistance & termite proof as per IS: 303) & pinewood of cross section devoid of major knots & surface defects 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY‎: ‎It is ‎a welded assembly ‎made in Stainless steel ‎(‎grade SS ‎202‎) ‎tube ‎& ‎plate‎ with plastic endcap. (W) 206.0* (D) 90.5(H) 85.5 cm seat (H) 45.0 cm

Sofa(1 seater) SEAT FOAM‎: ‎The seat is made of PU ‎foam with Density ‎28‎± ‎2 ‎kg‎/‎cu‎.‎mtr having an ‎additional top layer of super soft ‎PU foam in Density ‎32 ‎± ‎2 ‎kg‎/‎cu‎. ‎upholstered with fabric ‎or leatherette‎. ‎BACK ‎FOAM‎: ‎The back is ‎made of PU foam with ‎Density ‎28 ‎± ‎2 ‎kg‎/‎cu‎. mtr with two additional ‎top layer of supersoft ‎ foam of density ‎32‎±‎2 ‎kg‎/‎cu‎. ‎mtr‎, ‎upholstered ‎ with fabric or leatherette .UNDERSTRUCTRE ‎: ‎Understructure is made ‎up of ‎1‎.‎2‎±‎0‎.‎1 ‎cm‎. ‎thick ‎hot pressed plywood ‎( moisture resistance & termite proof as per IS: 303) & pinewood of cross section devoid of major knots & surface defects 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY‎: ‎It is ‎a welded assembly ‎made in Stainless steel ‎(‎grade SS ‎202‎) ‎tube ‎& ‎plate‎ with plastic endcap. (W) 86.0* (D) 90.5(H) 85.5 cm seat (H) 45.0 cm

Coffee Table Glass should be 12 ±0.3 mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for fixing with under structure. Should be a center table under structure: it should be a welded assembly made in ss202 grade having dia. 12±0.04 as per should be: 1762. Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.

Corner table Glass should be 12 ±0.3 mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for fixing with under structure. Should be a center table under structure: it should be a welded assembly made in ss202 grade having dia. 12±0.04 as per should be: 1762. Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm.

Conference table (8 seater) ( 2350 x 1150 x 740)Worktop:Made of 25mm thick MDF one side prelaminate board conforming to IS14587: 1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge.Soft closing dual access flap provided for access to power supply and data cables.Understructure:The Under-structure consists of mixture of 25mm and 18mm Pre- laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics.The product has a knock-down construction.Wire management:A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc).

Public Seating Chair(3 Seater) The seat shell should be a welded assembly of seat,back and side frame. The seat and back should be made of 0.12±0.013cm thk CR steel sheet with oblong perforations.They should be welded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly should be powder coated ( DFT 40-60 microns ). The seat has a front water fall edge to provide popliteal clearance for comfortable seating. It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back aids in easy maintenance. * SEAT SIZE : 47.8 cm (W) x 44.6 cm (D) * BACK SIZE : 41.6 cm (W) x 23.0 cm (H) Understructure assembly consshould be ts of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk.The welded structure assembly should be powder coated ( DFT 40-60 microns ).The leg assembly should be fitted with shoes and levellers in Nylon. The leg structure should be designed with minimal should be a of contact close to ground providing easy access for cleaning purposes. The shoes fitted to leg assembly help in aligning the structure for back to back arrangements. Levellers take cshould be of uneven flooring. Connecting beam should be fitted with snap locking end cap.lt also aids in side-by-side understructure alignment . Armrest assembly consshould be ts of armrest frame and armrest pad . The armrest frame should be made up of size 3.175±0.05cm x 0.47±0.027cm thk HR steel and it should be powder coated ( DFT 40-60 microns ). Armrest pad should be injection molded in Nylon and should be fitted onto the armrest frame.

Executie Chair (Without headrest back) SEAT/BACK ASSEMBLY: The Cushioned seat assembly consshould be ts of seat outer (material-30% Glass Fiber Nylon)& upholstered Seat inner (material- Poly Propylene) with moulded Polyurethane foam & polyster fabric. The Net Back should be made up of Back outer (material-Glass Fiber Filled Nylon)& Back inner (material- PP) and upholstered using Polyester Mesh fabric with high tenacity yarn. Full Back Size: 46.5 cm. (W) x 60.0 cm. (H) Seat Size : 51.0 cm. (W) x 49.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should be moulded with density = 45 +/- 2 kg/m³ and Hardness load 12 +/- 2 kgf for 25% compression. BACK SPINE: The support spine should be made up of High Pressure Die cast polished hed Aluminum. ARMRESTS : The armrest should be having two adjustment, Height (6.0±0.5cm) and Depth (6.0±0.5cm). Height adjustment should be provided in Aluminum structure of armrest which should be connected to Aluminum Back spine and should be operated by button. The depth adjustment should be provided in pad which should be fixed to armrest structure. Armrest Top should be made up of PU molded over plastic inner. ACTIVE BIO-SYNCHRO mechanism: The adjustable tilting mechanism should be designed with the following features: • 360° revolving type • Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort • Tilt tension adjustment can be operated in seating position • 5 position Tilt limiter giving option of variable tilt angle to the chair • Seat / back tilting ratio of 1:2 • The mechanism housing should be made up of HPDC Aluminum & black powder coated (DFT 40 to 60 micron) SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 3.75±0.1 cm LUMBAR SUPPORT ASSEMBLY: The Lumbar support assembly should consist of lumbar spine (material-Glass Fiber Filled Nylon) which should be fixed to Aluminum Back spine. The Lumbar pad (material- Poly Propylene) should be fixed to lumbar spine through lumbar Pad support. Lumbar Support Assembly has height adjustment of 5.0±0.5cm PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3cm. PEDESTAL ASSEMBLY WITH CASTORS: The pedestal should be High Pressure Die cast polished Aluminum and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter. Overall Dimensions of Chair Seat Height - min 45.5 to max 55.5cm. Height - min 95.5 to max 105.5 cm. Width & Depth of Chair as measured from pedestal - Width-75.0 cm and Depth-75.0 cm

Visitor Chair SEAT/BACK ASSEMBLY: The Cushioned seat assembly consshould be ts of seat outer (material-30% Glass Fiber Nylon)& upholstered Seat inner (material- Poly Propylene) with moulded Polyurethane foam & polyster fabric. The Net Back should be made up of Back outer (material-Glass Fiber Filled Nylon)& Back inner (material- PP) and upholstered using Polyester Mesh fabric with high tenacity yarn. Back Size: 46.5 cm. (W) x 60.0 cm. (H) Seat Size : 51.0 cm. (W) x 49.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should be moulded with density = 45 +/- 2 kg/m³ and Hardness load 12 +/- 2 kgf for 25% compression. BACK SPINE: The support spine should be made up of High Pressure Die cast polished hed Aluminum. LUMBAR SUPPORT ASSEMBLY: The Lumbar support assembly should consist of lumbar spine (material-Glass Fiber Filled Nylon) which should be fixed to Aluminum Back spine. The Lumbar pad (material- Poly Propylene) should be fixed to lumbar spine through lumbar Pad support. Lumbar Support Assembly has height adjustment of 5.0±0.5cm TUBULAR FRAME (3012AX): The powder coated (DFT 40-60 micron) tubular frame should be cantilever type & made of ∅2.54±0.03 cm x 0.2±0.016 cm thk MS ERW tube. Overall Dimensions of Chair Seat Height - 48.5cm. Height - 99.5cm. Width-65.5 cm and Depth-58.2 cm

Workstaion 1200mm W X 600mm D Worktop- 25 mm thick Prelaminated with PVC 52 mm thick 1200 mm ht. Workstation size - 1200mm W x 600mm D. Providing and placing Modular workstations consist of low ht. partition, work tops, Pedestal unit, key board tray & CPU trolley as per following specifications , drawings and approved makes. 52.4 mm & 22.8mm thk. 1047mm OR 1200mm Heigth panel based work station partition with flexible construction offering various functional and decorative finishes as well as cable management capacity. All trims made of aluminium extrusions. Blocks made out of a composite construction of MDF and paper honeycomb with one side rough prelaminate / fabric wrapped on it. Tiles should be slid in to the panels from top before fixing the top horizontal. Top tile to be in Fabric Tackable. These tiles to be supported from top & bottom side with clips made from PP co polymer fitted in horizontal extrusion. Bottom tile and leg to be made of Mild steel with epoxy powder coated. Fabricated bottom frame as a welded structure of steel components. The panels and worktops to be supported with MS legs with levelers at various locations depending on the layout requirements. Work top shall be made of 25mm thick Pre laminated particle board interior grade of approved Architect shade conforming to (IS: 12823.) Bottom shall have a backing laminate of minimum 0.6 mm thickness. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hotmelt EVA. PEDESTAL - freestanding pedestal with flat metal front of size 390 w x 435 d x 646 ht, box+box+file. Central locking. *Top tiles –clear glass,* Bottom tiles –Metal,* Intermediate blocks – fabric to be made of 0.8mm thick CRCA for body shell, drawer tray, front & rear side stiffener and 1.20 mm for top & bottom stiffener. Drawers to be without ng, side wise tapered recess to be provided in shell behind drawer fronts. 10 lever cam lock & central locking with actuator & lock channel mechanism. Keyboard pull out tray - Size :- 230mm W -345mm W X 226mm D X 180mm H. Metal Tray - Tray to be made of 1.0 mm thick MS CRCA Sheet and side supportto be made of 0.8 mm thick MS CRCA Sheet. Retrofit mouse tray to be provided on Right hand side or Left hand side as per requirement. Mouse tray size 210w x 210w made up of 0.9mm thk. CRCA 'D' grade as per IS - 513. CPU trolley - Size :- 230mm W -345mm W X 226mm D X 180mm H. Base tray to be made up of 1mm thk MS CRCA steel and side support to be made up of 0.8 thk. MS CRCA sheet. Non lockable twin wheel castors to be injection moulded in Black Nylon.

Executive Table (1500mm) Main unit + Side Unit+ Pedestal (LH - 1No.) Finesse Table - 5026 size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. Side Unit -3616 LHS size shall be 1050 Width x 450 Depth x 705 Height. The top of Side Unit -3616 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle

Workstaion 1500mm W1 X 1500mm W2Worktop- 25 mm thick Prelaminated with PVC 52 mm thick 1200 mm ht. Work station size 1500mm W x 1500 mmd.. PEDESTAL - Nova freestanding, pedestal with flat metal front of size 390 w x 435 d x 646 ht, box+box+file. Central locking. *Top tiles –clear glass,* Bottom tiles –Metal,* Intermediate blocks – fabric. Providing and placing Modular workstations consist of low ht. partition, work tops, Pedestal unit, key board tray & CPU trolley as per following specifications , drawings and approved makes. 52.4 mm & 22.8mm thk. 1047mm OR 1200mm Heigth panel based work station partition with flexible construction offering various functional and decorative finishes as well as cable management capacity. All trims made of aluminium extrusions. Blocks made out of a composite construction of MDF and paper honeycomb with one side rough prelaminate / fabric wrapped on it. Tiles should be slid in to the panels from top before fixing the top horizontal. Top tile to be in Fabric Tackable. These tiles to be supported from top & bottom side with clips made from PP co polymer fitted in horizontal extrusion. Bottom tile and leg to be made of Mild steel with epoxy powder coated.Fabricated bottom frame as a welded structure of steel components. The panels and worktops to be supported with MS legs with levelers at various locations depending on the layout requirements. Work top shall be made of 25mm thick Pre laminated particle board interior grade of approved Architect shade conforming to (IS: 12823.) Bottom shall have a backing laminate of minimum 0.6 mm thickness. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hotmelt EVA.PEDESTAL - Nova freestanding, pedestal with flat metal front of size 390 w x 435 d x 646 ht, box+box+file. Central locking. *Top tiles –clear glass,* Bottom tiles –Metal,* Intermediate blocks – fabric to be made of 0.8mm thick CRCA for body shell, drawer tray, front & rear side stiffener and 1.20 mm for top & bottom stiffener. Drawers to be without ng, side wise tapered recess to be provided in shell behind drawer fronts. 10 lever cam lock & central locking with actuator & lock channel mechanism. Keyboard pull out tray - Size :- 230mm W -345mm W X 226mm D X 180mm H. Metal Tray - Tray to be made of 1.0 mm thick MS CRCA Sheet and side supportto be made of 0.8 mm thick MS CRCA Sheet. Retrofit mouse tray to be provided on Right hand side or Left hand side as per requirement. Mouse tray size 210w x 210w made up of 0.9mm thk. CRCA 'D' grade as per IS - 513. CPU trolley - Size :- 230mm W -345mm W X 226mm D X 180mm H. Base tray to be made up of 1mm thk MS CRCA steel and side support to be made up of 0.8 thk. MS CRCA sheet. Non lockable twin wheel castors to be injection moulded in Black Nylon.

Executive Chair SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE 47.5 cm. (W) x 69.5 cm (H) SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS :The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. CENTER TILT SYNCHRO mechanism: The mechanism should be designed with the following features: • 360° revolving type. • Upright-position locking • Tilt tension adjustment • Seat/back tilting ratio of 1:3. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLYThe bellow should be 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). .TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Nylon. Overall Dimensions of Chair Seat Height - min 42.5 to max 54.5cm. Height - min97.0 to max 109.0cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.

Cupboard WITH PL PVC TOP( 1192.5H x 900W x 450D) Cupboard With PL PVC Top shall have an overall size of 900mm(W)x450mm(D)x1167.5mm(H) . The construction shall be rigid knock down construction and Material used shall be prime quality CRCA steel - panels from 0.6 mm thick & front frame . Shelf shall be 0.8 mm thick .Configuration (Door) shall be full height steel hinged door . Locking shall be Plastic Recessed Handle cum Cam lock with 3 way locking mechanism with shooting bolt arrangement . Height wise adjustable shelf mounting , Uniformly distributed load capacity per each full shelf shall be 80 Kg maximum . For minor 2 Nos. of adjustable full shelves . The top shall be Plain Wooden Top plus leveler shall be screw type with hex plastic base and Epoxy Powder coated finish to the thickness of 50 microns .

Compactor Overall Dimensions 830mm(W)x915mm(D)x2180mm(H). The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load capacity of 80 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3.15 mm thick conforming to IS : 10748 . Finish shall be epoxy polyester powder coat of approved color & shade with a dry film thickness of minimum 40 microns .The Movements shall be Drive Type configuration : In case of D2 & D3 movement of units is achieved mechanically through a PU Drive Wheel and Sprocket -Chain-Tensioner arrangement mounted rigidly onto body size .For D2 each movable undercarriage shall be provided with 2 rollers on the shaft for driving , 2 antifriction ball bearing for rolling and 4 antifriction ball bearing for guiding. Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together . The Recess handle lock is placed at suitable height . This arrangement occupies a space of 90.0 mm . When the last unit is twin movable , hinged doors are provided for the end bodies, so in this case locking stiffener is mounted onto drive unit cover ; and with tile fascia option , it will be mounted in the recess of vertical trim . Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units . Knob shall be rotated to unlock position when units are to be moved . End stoppers shall be provided to prevent derailment . Door locking shall be having hinged doors of recessed die cast handle cum lock giving 3 way locking through a lever & shooting bolts . Guide channels shall have 'J' section 2 mm thick HR & 25 mm Square bright bar . Easteners shall be galvanized/blackodized/Zn plated .The label holder shall be made from 2 mm thick clear transparent acrylic sheet . Also total no. of loading levels per understructure shall be 20 for TD2. Fascia(tiling) 3 tile pattern fascia option on drive side panel plus 3 tile pattern fascia on non-drive side panel plus 3 tile pattern fascia option on back panel of single last plus 3 tile pattern fascia option on back panel of single static . The tiles are held together by stiffeners & fasteners in 2 vertical metal trims.