Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.0 LAccepted-AOC | L1 | Accepted-AOC Valid | |
| 2 | L2₹30.6 L+₹4.4 L (17.0%)Rejected-AOC | L2 | Rejected-AOC NA | |
| 3 | L3₹31.1 L+₹5.0 L (19.1%)Rejected-AOC VILLAGE SATOJ TEHSIL SUNAM DISTT SANGRUR | SANGRUR | PUNJAB | 148001 | L3 | Rejected-AOC NA | |
| 4 | L4₹32.5 L+₹6.4 L (24.5%)Rejected-AOC | L4 | Rejected-AOC NA | |
| 5 | L5₹35.1 L+₹9.0 L (34.3%)Rejected-AOC PLOT NO 46 WARD NO 08 OPPOSITE RADIO TOWER SAGAR ROAD TILAK NAGAR BIKANER 334003 RAJ | BIKANER | BIKANER | RAJASTHAN | 334003 | L5 | Rejected-AOC NA |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
10 Sept 2018, 6:00 pmClosed
GE (AF) Suratgarh
GE (AF) Suratgarh (Raj) PIN 335804
CAMOUFLAGE PAINTING IN TECHNICAL AREA AT AF STATION SURATGARH
2018_MES_209419_1
8688/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) Suratgarh
As per tender documents
10 documents required · 10 mandatory
₹500
Yes
GE (AF) Suratgarh
₹80,000
Yes
26 May 2020
20 Aug 2018
12 Sept 2018
20 Aug 2018
10 Sept 2018
3 Sept 2018
Amount
Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land ,complete all as specified and directed by the Engineer in Charge.
Rendering 15 mm thick cement plaster in cement mortar (1:6) on fair faces of brick works or concrete surfaces , finished even and smooth without using extra cement , complete all as specified and directed by the Engineer-in-Charge.
Rough cast plaster over and including 10 mm thick rendering coat in cement mortar 1:4 on fair faces of brick or concrete surfaces.complete all as specified and directed by Engineer-in-Charge.
Rendering 5 mm thick cement plaster in cement mortar (1:3) on concrete surfaces of RCC in ceiling , finished even and smooth without using extra cement , complete all as specified and directed by Engineer-in-Charge.
Rendering 15 mm thick cement plaster in cement mortar (1:4) on fair faces of brick works or concrete surfaces , finished even and smooth without using extra cement , complete all as specified and directed by the Engineer-in-Charge.
Preparation of old surfaces of wall including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of white wash, complete all as specified and directed by Engineer –in-Charge.
Preparation of new plastered or unplastered surfaces of ceiling including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of white wash, complete all as specified and directed by Engineer-in-Charge.
Preparation of old surfaces of ceiling including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of white wash, complete all as specified and directed by Engineer –in-Charge.
Preparation of old plastered wall /ceiling/ roof surfaces and applying two coats of exterior acrylic emulsion paint (antifungal) over and including one coat of primer, (in camouflage pattern using number of colours) , complete all as specified and directed by the Engineer-in-Charge. Notes for item No.9.00 & 10.00 : (i) The contractor shall procure 50% quantity of exterior acrylic emulsion paint required in the work within 15 days from the date of commencment and deposit the same in the custody of Engineer-in-Charge.Engineer-in-Charge shall maintain a record of the material brought and consumed at site in the work and purchase vouchers shall be defaced and verified by the Engineer-in- Charge and same shall be submitted to GE for verification. (ii) Material shall be recorded in MB under proprietary branded material duly signed by all concerned . (iii) Pattern of camouflage shall be approved by GE.
Preparation of new plastered external wall surfaces and applying two coats of exterior acrylic emulsion paint (antifungal) over and including one coat of primer, (in camouflage pattern using number of colours) , complete all as specified and directed by the Engineer-in-Charge.
Preparation of plastered wall surfaces i.e leveling/ edging the distrurbed places/edges using necessary filling compund of a coat of Birla / JK wall care putty to obtain smooth regular/ even finish using sand paper complete all as specified and directed by the Engineer-in-Charge. Note :This item shall be executed for levelling of surface required under item no.9 &10 above.
Preparation of new plastered or un plastered wall surfaces of any description and applying two coats of oil bound distemper over a coat of Chalk whitening primer, complete all as specified and directed by the Engineer-in-Charge
Preparation of plastered wall surfaces i.e leveling/ edging the distrurbed places/edges using necessary filling compund of a coat of Birla / JK wall care putty to obtain smooth regular/ even finish using sand paper complete all as specified and directed by the Engineer-in-Charge. Note :This item shall be executed for levelling of surface required under item no.12 above.
Preparation of old plastered or unplastered surfaces of wall of any description including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of oil bound distemper (shade as approved), complete all as specified and directed by the Engineer-in-Charge.
Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shades , complete all as specified and directed by Engineer-in-Charge
Preparation of old painted wooden surfaces of any description , not otherwise described over 10 cm width or girth and applying two coats of synthetick enamells paint (of approved shade), complete all as specified and directed by Engineer-in-Charge
Dismentling of brick work built in cement mortar including all quoins, arches , pillars etc but excluding precast concrete articles, complete all as specified and directed by the Engineer-in-Charge. Note :After stacking of Serviceable bricks rest debries shall be removed out side of MOD land as directed.
Brick work with fly ash bricks of size 23 cm x 11 cm x 7 cm conforming the requirement as specified in IS-12894-2002, straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:6), complete all as specified and directed by the Engineer-in-Charge.
Brick masonry with sub class B bricks straight or curved on plan exceeding 6 m mean radius (except bricks), built in Cement Mortar (1:6) ,complete all as specified and directed by the Engineer in Charge. Note : Serviceable bricks retrieved from Serial item No 17.00 here-in-before shall be used after proper washing.
Contract Amount shall be derived after affecting the amount of Schedule of Credit in General Summary on serial page No 15 of tender documents.
H S BUILDERS
M/S SIDHU CONSTRUCTION COMPANY
shubham enterprises
M/S BUDHRAM BISHNOI
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .