SPECIAL REPAIR OF OFFICE COMPLEX BLDG NO T 22 OF MED REGT (OLD KLP) AT FARIDKOT MIL STN

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking of shutters from the frames) incl making good disturbed surfaces of wall matching adjoining wall finish and removing taken down material from site complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but not exc 4.00 Sqm each with shutters (without taking of shutters from the frames) incl making good disturbed surfaces of wall matching adjoining wall finish and removing taken down material from site complete all as specified and directed.

S&F Powder coated Aluminium frame for doors, window/partitions/ventilator/sliding window with one or more rebates including joining cleat for fixing etc complete with Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners including making arrangements Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge.

S&F Powder coated Aluminium window/ventilator shutter (glazed and gauzed both),side hung/sliding type without sash bars, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws,aluminium fitting such as peg stays 150mm long (01 nos) for each shutter, hinges type B-21 100mm long (02 Nos) suitable handle (02 No) and 100 mm tower bolt 02 Nos in each shutter with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed. Note: Only Glass and wiremesh will be measured and paid seperately.

S&F Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, 3 Nos hinges in each door, roller for sliding door anodised aluminum snap beading screws etc. with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed. Note: Only Glass and wiremesh will be measured and paid seperately.

S&F Brass Mortice lock, 4 levers vertical type, size 100 mm complete all as specified and directed

S&F in repair aluminium (Die cast) body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80kg and fixed complete all as specified and directed by Engineer-in-Charge.

M&L for Sheet glass 5.5 mm thick, ordinary quality/tinted in aluminium frame incl rubber beading and glazing in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-charge.

M&L for Sheet glass 5.5 mm thick, ordinary quality/tinted in aluminium frame incl rubber beading and glazing in square exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-charge.

Supply only Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm to be fixed in Aluminium window complete all as specified and directed by Engr-inCharge.