T.S. N0. 015/2020-21 Of SE/GCC/SLM(MM).

Amount

Supply and Iron Steel as per ISI

RS JOISTS 200X100 mm

MSC 125X65 mm

MSC 100X50 mm

ANG 100x100x 8 mm

ANG 65x65x 6 mm

ANG 50x50x 6 mm

M.S Flat 65 X 10 mm

M.S.Flat 50x8mm (including earthmat)

MS rod 40mm

MS/RTS rod 20mm

Labour for transporting of iron & steel from chennai (410 Kms) including loading and unloading charges

Labour, machinery, Consumables for the Fabrication of

Heavy section without length wise welded joints (Sectional weight 14Kg/Mtr and above).

Heavy section with length wise welded joints (Sectional weight 14Kg/Mtr and above).

Light section with joints wherever necessary (sectional weight below 14Kg/Mtr) .

Labour for the Erection of the Fabricated Steel Structures

Heavy,section (sectional weight 14Kg/Mtr and above)

Heavy,section (sectional weight 14Kg/Mtr and above) (LC Work)

Light section (sectional weight below 14Kg/Mtr)

Light section (sectional weight below 14Kg/Mtr) (LC Work)

Labour machineries,consumable For fabrication of earth electrode 10Mtr/6Mtr length or as directed by the field Engineer.

Labour machineries, consumables for fabrication & erection of earth spikes.

Labour machineries, consumables for erection of earthmat & earth raisers as directed by the field Engineer at site

Providing 140/150mm dia bore including labour,lead,lift etc., including mobilization in all types of soil and erection of earth electrode, supply and providing A4 Grade bentonite powder with 5% common salt mixed with available site clay soil 5Kg/meter depth in earth bore as directed by the field Engineer.

Supply and providing of 600mm mean dia,300mm height 36mm thick cement coller for identification of earth electrode location including 1primer and 2 coats of colour wash as directed by field Engineer.

Paintings

Labour for rust removing,cleaning painting of first primer coat of all sections using brushes

Labour for rust removing,cleaning painting of first finishing coat of all sections using brushes

Labour for painting of second finishing coat of all sections using brushes

Labour for erection of AB Switches, including cost of lubricant, consumable, and wiring (if necessary) allinment, checking of operation by both manual and electrical (if necessary) and as directed by the field Engineer.

110 KV with Earth - Hand Operated

110 KV without Earth - Hand Operated (LC Work)`

Labour for stringing of strung bus including hoisting of insulator,

110KV Single Zebra conductor. (1 span 3 run)

Labour for erection of single pole stack up right, under hang or suspension.

110 KV (LC Work)`

Labour for erection of bus bar including fabrication and any modification of end clamp wherewere necessary and as directed by the field Engineer.

75 mm without bend(1 length)

75 mm without bend(1 length) (LC Work)

Labour for providing Droppers and jumpers .

Labour for providing Droppers and jumpers (LCWork)

Labour for earth work excavation in all class of soil with insial lead of 10m and lift of 2mts. Etc., for eathmat work

In hard graval soil

In soft disintergarated rock

Refilling of excavated soil

Labour for loading or unloading or shifting of non fragile materials without using board Crane (One operation)

Labour for loading or unloading or shifting of fragile materials without using board Crane (One operation)

Supply of Power Connectors as per Drawing

Switch end clamp for Single Zebra

Switch end clamp for Panther

Switch end clamp for 3" Bus Bar

" T " Clamp for Zebra to 3" B/B

" T " Clamp for Zebra to Zebra

Free end Clamp for 3" Bus Bar

Corona Bell for 3" Bus Bar

PG Clamp for Zebra

Reducer Clamp for 3" Bus to Zebra

6 Bolt Tension Fitting for Zebra (Single)

Supply of good Quality Aluminium Paint

Supply of good Quality red oxide Paint

Supply of good Quality AC Black Paint

Supply of GI Bolt & Nuts with washers of various size

Manufacturing and supply of bolt of required length of 18 - 20 mm dia GI rod including cost of GI rod and 2Nos GI nuts & washer as directed by the field Engineer. Grout bolt & Eye bolt.

Supply and provision of M8,M9, M10,M12, & M16 full thread GI bolt, nuts & GI washer of various size for erection of insulator or any other purpose wherever required and as directed by the field Engineer.

Manufacturing & supply of yard light box of size 200W x 200H x 150D mm out of 18SWG (1.2mm ) M.S.Sheet with cable entry holes, fixing arrangements for fuse units and mounting clamps as directed by the field Engineer including cost of all materials.

Labour charges for removing rust, primer coat, first & second coat painting both sides & in M.S.board RSJoist & yard light pole etc., including cost of enamel paint (Dulex,Asian, Berger preferred) and other consumables directed by the field Engineer.

Supply,and Erection of LED lamp72W fitting with fixture and fuse box including wirng and testing for burning condition;including the cost of 15 amps 2Way strip connector and other consumables.

Supply and erection of `B` Class GI pipe for extension of tandum /down pipe for AB Switches and for any other work as required by and as directed by field Engineer including cost of GI Pipe.

40mm dia

Supply & fixing of ISI mark porcelain rewirable fuse unit of reputed make in panels, boxes for AC Circuits wherever required as directed by the Field Engineer.

Supply & fixing of (Godrej) 6lever Navtal lock with triplicate keys for AB switches and for any other purpose including the cost of ring and key token as directed by the field Engineer.

Supply and fixing of flexible copper tape/rope for interlinking panel earthing and for any other purpose,on any sizes, including the cost of copper lugs at both ends as directed by the field Engineer.

Fabrication and fixing of bell mouth Providing Jumper connection in the solid core/PT Insulators Including the cost of GI Pipe 50mm dia one meter & other consumables & as directed by the field Engineer.

Supply and erection of Tubular type yard light Poles as per drawing

Supply of 8.0 mtr long stepped tubular pole for yard light

Labour for Dismantling of AB Switches as directed by the field Engineer. (LC Work)

110 KV with Earth - Hand Operated

Labour for Dismantling of bus bar as directed by the field Engineer. (LC Work)

75 mm without bend(1 length)

Labour for Dismantling Droppers and jumpers (LC Work)

Labour for the dismanling of Structures (LC Work)

Heavy,section (sectional weight 14Kg/Mtr and above)

Light section (sectional weight below 14Kg/Mtr)