Repair of leakage at Room no.1 and 2 at the basement from drainage, repair of washroom with sanitary fittings, concealed cistern, tile and stone work and providing and fixing of signage board at main entrance of Umang Bhawan , University of Delhi

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wal: 20 mm nominal dia Pipes

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length15 mm nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 mm dia

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with aecessary accessories and screws etc. complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except urgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :Sand Cast Iron S&S as per IS: 1729

Providing and fixing bright finished Stainless steel tower bolts with nesessary screws etc. size : 200x10 mm complete as per direction of Engineer in charge

P/F concealed cistern flush plate [Hindwere concealo CUTE CAT No. 525018 or equivalent of Jaquar, Kohler, Grohe] etc complete as per direction of Engineering in-charge.

Providing and fixing white coloured vitreous china Wall Mounted water closet (European type W.C. pan) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white coloured vitreous china solid soft close seat cover twin flush fittings (Hindware make cat no. 92523 or equivalent of Kohler, Grohe)

P/F CP brass Pressmatic push pillar tap 15 mm nominal bore of Jaquar make no. PRS-031 or equivalent

Providing and fixing star white Urinals size: 31x 48x70 cm (olympus New standard CAT No. 96010 Hindware make or equivalent of Kohler, Grohe) i/c all necessary fitting like socket, nipple, elbow cutting hole in wall whereever required and making good the same etc complete as per direction of Engineer-in-charge.

P/F CP brass Urinal valve Autoclosing system & wall flange 15 mm nominal bore of Jaquar make no. PRS-077 or equivalent

P/F hand shower (Health Facuet) (ALD-573) with 8 mm dia 1 meter long flexible tube and wall hook of Jaquar make or equivalent of Kohler, Grohe) complete as per direction of engineer in charge