GE/H/T-23/2026-27 SPL REPAIR/ REPLACEMENT OF OLD UNSV WARD LIGHTS AT B AND C BLOCK AT AHRR UNDER GE E/M R AND R HOSP DELHI CANTT-10

S & F in replacement of ceiling recessed mounting LED luminaire of size 600 mm x 600 mm (2’ x 2’), 36 Watt, suitable for Armstrong / grid ceiling, complete as required; the luminaire shall be made of CRCA sheet steel housing, powder coated for durability, and provided with opal / frosted polycarbonate (PC)/polystyrene (PS) diffuser for uniform glare-free illumination suitable for office applications; the LEDs used shall have luminous efficacy ≥120 lumen/watt, CCT 6500K (cool daylight), CRI ≥80, colour consistency SDCM ≤5, power factor ≥0.95, and surge protection minimum 3.5 kV, operating on input voltage range 180–270 V AC, 50 Hz; the luminaire shall be complete with high-efficiency constant current LED driver, and both luminaire and driver shall be BIS registered and of the same make/manufacturer; the brand name shall be permanently embossed/engraved on luminaire body/accessories/end caps and not applied by sticker or screen printing; complete with all fixing accessories, connections, etc., and installed as per site requirement and as directed by the Engineer-in-Charge.

S & F in replacement of ceiling recessed mounting LED luminaire of size 600 mm x 600 mm (2’ x 2’), 40/42 Watt, suitable for Armstrong / grid ceiling, complete as required; the luminaire shall be made of CRCA sheet steel housing, powder coated for durability, and provided with opal / frosted polycarbonate (PC)/polystyrene (PS) diffuser for uniform glare-free illumination suitable for office applications; the LEDs used shall have luminous efficacy ≥120 lumen/watt, CCT 6500K (cool daylight), CRI ≥80, colour consistency SDCM ≤5, power factor ≥0.95, and surge protection minimum 3.5 kV, operating on input voltage range 180–270 V AC, 50 Hz; the luminaire shall be complete with high-efficiency constant current LED driver, and both luminaire and driver shall be BIS registered and of the same make/manufacturer; the brand name shall be permanently embossed/engraved on luminaire body/accessories/end caps and not applied by sticker or screen printing; complete with all fixing accessories, connections, etc., and installed as per site requirement and as directed by the Engineer-in-Charge.

S & F in replacement of ceiling recessed mounting LED luminaire of size 600 mm x 600 mm (2’ x 2’), 36 Watt, suitable for Armstrong / grid ceiling, complete as required; the luminaire shall be provided with AN INBUILT MICROWAVE MOTION SENSOR CAPABLE OF AUTOMATIC OPERATION SUCH THAT THE LUMINAIRE GLOWS AT FULL BRIGHTNESS WHEN MOTION IS DETECTED AND DIMS TO A PRESET LOWER LEVEL IN THE ABSENCE OF MOVEMENT, with adjustable time delay/sensitivity as required; the luminaire shall be made of CRCA sheet steel housing, powder coated for durability, and provided with a fully diffused high-quality polycarbonate (PC)/polystyrene (PS) diffuser for uniform glare-free illumination suitable for office/passage areas; the LEDs used shall have luminous efficacy ≥120 lumen/watt, CCT 6500K, CRI ≥80, colour consistency SDCM ≤5, power factor ≥0.95, and surge protection minimum 3.5 kV, operating on input voltage range 140–270 V AC, 50 Hz; the luminaire shall be complete with a high-efficiency constant current LED driver, and both luminaire and driver shall be BIS registered and of the same make/manufacturer; the brand name shall be permanently embossed/engraved on the luminaire body/accessories/end caps and not applied by sticker or screen printing; complete with all fixing accessories, connections, and commissioning, as per site requirement and as directed by the Engineer-in-Charge.

S & F in replacement of ceiling recessed mounting LED Sky Light luminaire with printed customised design (design as approved by GE) of size 600 mm x 600 mm (2’ x 2’), 36 Watt, suitable for Armstrong/grid ceiling, complete as required; the luminaire shall be made of CRCA sheet steel housing, powder coated for durability, and provided with PC diffuser with customised printed design for uniform and aesthetic illumination; the LEDs used shall have CCT 6500K (neutral white), CRI ≥80, colour consistency SDCM ≤5, power factor ≥0.95, and surge protection minimum 3.5 kV, operating on input voltage range 180–270 V AC, 50 Hz; the luminaire shall be complete with high-efficiency constant current LED driver, and both luminaire and driver shall be BIS registered and of the same make/manufacturer; complete with all fixing accessories, connections, etc., and installed as per site requirement and as directed by the Engineer-in-Charge.

S & F in replacement of surface-mounted LED light fitting, 12/15 Watt, round type, suitable for operation on 240 V AC, 50 Hz, complete as required; the luminaire shall be provided with AN INBUILT MICROWAVE MOTION SENSOR CAPABLE OF AUTOMATIC OPERATION SUCH THAT THE LUMINAIRE GLOWS AT FULL BRIGHTNESS WHEN MOTION IS DETECTED AND DIMS TO A PRESET LOWER LEVEL IN THE ABSENCE OF MOVEMENT (auto-dim after 3 minutes of inactivity); the fitting shall be provided with a high-quality polycarbonate (PC) diffuser and shall have IP20 protection against dust ingress, suitable for indoor applications; the LEDs used shall have luminous efficacy ≥100 lumen/watt, CCT 6500K (cool daylight), CRI ≥80, power factor ≥0.90, and surge protection minimum 2.5 kV; the luminaire shall be complete with a high-efficiency constant current LED driver, and both luminaire and driver shall be BIS registered and of the same make/manufacturer; the brand name shall be permanently embossed/engraved on the luminaire body/accessories/end caps and not applied by sticker or screen printing; complete with all fixing accessories, connections, and commissioning, as per site requirement and as directed by the Engineer-in-Charge.

All as per item No 5 in here before but 18/20 W.

S & F in replacement of 3 Watt LED wall-mounted light fitting, suitable for operation on 230 V, single phase, 50 Hz AC, of flexible gooseneck type for patient/bedside use, complete as required; the luminaire shall be plug-in or direct connection type and provided WITH INBUILT USB CHARGING PORT FOR MOBILE PHONE CHARGING, suitable for bedside applications; the fitting shall have a focused beam for reading / precision tasks with flexible gooseneck arm for easy adjustment of light direction, and provided with manual ON/OFF switch on the fitting; the luminaire shall be of black finish with warm white light output (CCT 2700K–3000K) to provide comfortable and glare-free illumination suitable for bedside environments; complete with all fixing accessories, connections, and commissioning, as per site requirement and as directed by the Engineer-in-Charge.

S & F in replacement of LED COB Downlight: Supply and fixing in replacement of ceiling recessed LED COB light fitting, 15W, ≥110 lm/W, CCT 4000K, PF ≥0.95, 50,000 hrs life, with minimum 3.5 kV surge protection, die-cast aluminium housing, complete with BIS registered LED and driver (same make), suitable for 230V AC supply, including all connections, accessories, testing and commissioning, complete as specified and directed.

S & F in replacement LED Track Light fitting 20W, lumen output ≥ 2000 lm, CRI ≥ 80, CCT 3000K/4000K, adjustable beam (24°–60°), die-cast aluminium housing with powder coating, integral driver, suitable for track mounting complete all as specified and directed

S & F in replacement of Aluminium Track (2/3 wire system) with copper conductors, powder coated including suitable end cap units / connectors, suspension kit / mounting brackets etc complete all as specified and directed