Replacement of 1no 1.5 hp Submersible pump set, pump starters, and repairing of 1 no 5 HP and 1 no 10 Hp submersible pump set with associated work at main pump house of P and T colony, unit-4 Bhubaneswar.

Amount

Replacement of faulty submerssible pump set by new one of 1.5 hp submersible pump set suitable for operation on 3 phase, 415 V,50 Hz Ac supply i/c trial run etc completet as requierd. (Make:- KSB, Pump Model-2C/18 +1.1/22) or S.S Make

Installation testing & commissioning of submersible pump set in the existing bore well, making through piping, & electrical connection, Operational testing of pump set etc. as required.

With Overload relay range (2.4 Amps-3.8 Amps) (Make BCH Shakti DOL , model CPEYSAGZ or or equivalent of Siemens/L&T/ABB)

With Overload relay range (3.8 Amps-6.0 Amps) (Make BCH Shakti DOL , model CPEYSAHZ or or equivalent of Siemens/L&T/ABB)

With Overload relay range (6.0 Amps-9.3 Amps) ( Make BCH Shakti DOL , model CPEYSAJZ or or equivalent of Siemens/L&T/ABB)

Supplying of following spares & accessories for installation of submersible pump set in the existing bore well etc as required.

Steel Nipple with Steel bolt with nut complete

3 core 2.5sqmm weather proof copper conductor submersible flat cable( Make:- Finolex/Havells/Anchor or SS make )

Disconnection of power supply & piping connection for following pumpsets installed inside the sump for removal of the same for facilitating rectification work by civil unit as per requirement .

10 HP Openwall type submersible pumpset.

Making & grouting/fixing the MS base frame made of 75mmx40mmx5mm MS Chanel, fabricated ( Cut to size, welded, drilled) as instructed by Engineer incharge as per requirement , painted with 2 coats of red oxide primer & 2 coat of synthetic enamel paint complete as required.

For 10 HP Open well type submersible pump set.

For 5HP bore well type submersible pump set

Reinstallation of following pumpsets inside sump on the existing motor base frame with suitable fastening arrangements after clearance from civil unit with making necessary inter connection of pipe line between pumpset to existing supply line/ distributor line after removing the existing PVC /HSPE connection, Fixing of metalic piping accessories /pipe including making necessary cutting /welding /jointing wherever as required. (Materials are not under scope of this item)

10 HP Open well type submersible pump set.

5HP borewell type submersible pump set

Painting of Inter connecting pipe line between pumpset to Supply line/ Distributor line joint with 2 coats of oxide paint & 2 coats of synthetic enamel paint of approved colour & grade complete as required.

10 HP Openwall type submersible pumpset to OH tank supply line .

5HP borewell type submersible pumpset to existing distributor line

Supplying of HDPE Pipes for replacing the existing damaged ones / Using as protection for submersible copper flat cables wherever required..

Supplying of 40mm size ISI marked HDPE pipes (PE80, SDR-11, PN-6 ) for the submersible pump sets by new one. ( Make- Oriplast/ Supreme /SS make)

25mm dia HDPE pipe, PE-80, SDR-11 , PN-6 ( Make- Oriplast/ Supreme /SS make)

Fixing/ Laying of HDPE pipe from pump room to sump no-1/ Borewell -1 for drawing 3 core flat submersible cable inside for protection as required.

Fixing of HDPE pipe on wall with Saddle (25mm)

Laying of HDPE Pipe underground (25mm)

Laying of HDPE Pipe on ground/ Sump (25mm)

Laying of HDPE Pipe underground ( 40MM)

Supplying & Fixing of Sintex GSJB 1414 140 x 140 x 95 mm Surface Mounted Junction Boxes 1no SINTEX box for Junction/diversion of Submersible Flat PVC insulated cable on the existing boundary wall with required fasteners complete as required.

Replacement of the following damaged pipe lines with accessories(metalic) by new ones of following sizes i/c all plumbing works etc. as required.

50mm GI pipe

50mm Non return valve ( make- Leader/Zoloto/ SS make )

50mm brass valve ( make- Leader/ Zoloto/ SS make )

50mm MS bend

50mm GI Flange

MS bolt, nut & washer

50mmx40mm GI reducer

50mm MS short piece

Replacement of the following damaged pipe lines with accessories( non-metalic) by new ones of following sizes i/c all plumbing works etc. as required.

50mm UPVC union

50mm bend

50mm MABT

50mm FABT

50mm MAPT

50mm FABT

50mm dia CPVC Ball Valve

50mm dia CPVC Socket (plastic threaded)

40mm End Cap

Withdrawing the submersible pump set from the Bore well along with delivery pipe lines after disconnection of power supply cable, delivery pipes etc. complete as required.

Excavationof earth for laying of new pipe line for water supply & laying power supply cable borewell point by engagaement of labour, required tool& plant. Refilling earth back after laying of pipe line. Compacting at Qtr entrances wherever required.

Supplying/ Fixing of electronic timer switch for operation of pumpset , making necessary connection with existing starter in consultation with engineer in charge , checking testing etc complete as required.