Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹9.0 LAccepted-AOC | L-1 | Accepted-AOC Being L-1. | |
| 2 | L-2₹9.3 L+₹21,331.25 (2.35%)Rejected-Finance C O S 1 ESS GEE COMPLEX NEAR J K BANK SONAWAR BAZAR B B CANTT SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L-2 | Rejected-Finance Being not L-1. | |
| 3 | L-3₹10.5 L+₹1.4 L (15.2%)Rejected-Finance BABAPORE KHREW PAMPORE PULWAMA KASHMIR | PULWAMA | JAMMU AND KASHMIR | 191102 | L-3 | Rejected-Finance Being not L-1. | |
| 4 | L-4₹11.0 L+₹1.9 L (21.1%)Rejected-Finance | L-4 | Rejected-Finance Being not L-1. | |
| 5 | L-5₹11.6 L+₹2.5 L (28.0%)Rejected-Finance | L-5 | Rejected-Finance Being not L-1. |
| Sl No | Description | Qty | Unit | M/S TAJ DIN KHARI L7 | M/S MAHIR MUNEER L8 | M/s AMIR MAQBOOL L5 | M/S MATOO INFRASTRUCTURES PVT. LTD. L6 | M/S A.N CONSTRUCTIONs L2 | M/s Haji Mohd Sultan Sofi L4 | SAMEER CONSTRUCTIONS L3 | M/S NEW IQBAL ENTERPRISES L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of cement concrete in ground floor and paving n.exe 15 cm thick below or above ground level complete all as specified and directed by Engineer-in-Charge. | 96.75 | Cum | 300 ₹29,025 | 250 ₹24,187.5 | 300 ₹29,025 | 90 ₹8,707.5 | 50 ₹4,837.5 Lowest | 150 ₹14,512.5 | 120 ₹11,610 | 75 ₹7,256.25 |
| 2.00 | Demolition of brick or stone masonry built in cement mortar including all necessary arches, quoins, pillars etc but excluding ashlar facings, dressed stone work and precast concrete artilces complete all as specified and directed by Engineer-in-Charge. | 13 | Cum | 500 ₹6,500 | 2,000 ₹26,000 | 200 ₹2,600 | 100 ₹1,300 | 50 ₹650 Lowest | 150 ₹1,950 | 100 ₹1,300 | 65 ₹845 |
| 3.00 | Demolition of reinforced cement concrete of any description (reinforcement cut as reqduired to facilitate demolition) complete all as specified and directed by Engineer-in-Charge. | 5 | Cum | 500 ₹2,500 | 100 ₹500 | 500 ₹2,500 | 100 ₹500 | 50 ₹250 Lowest | 120 ₹600 | 150 ₹750 | 100 ₹500 |
| 4.00 | Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed by Engineer-in-Charge. | 3 | Cum | 500 ₹1,500 | 50 ₹150 Lowest | 200 ₹600 | 100 ₹300 | 50 ₹150 Lowest | 90 ₹270 | 130 ₹390 | 185 ₹555 |
| 5.00 | Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed by Engineer-in-Charge. | 500 | Sqm | 50 ₹25,000 | 40 ₹20,000 | 20 ₹10,000 | 8 ₹4,000 | 15 ₹7,500 | 3 ₹1,500 Lowest | 82 ₹41,000 | 10 ₹5,000 |
| 6.00 | M&L for squared rubble walling , brought upto courses , well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. | 10 | Cum | 4,000 ₹40,000 | 3,500 ₹35,000 | 2,500 ₹25,000 | 4,000 ₹40,000 | 1,500 ₹15,000 | 1,300 ₹13,000 | 1,000 ₹10,000 Lowest | 2,000 ₹20,000 |
| 7.00 | M&L for flush pointing to random rubble masonry in cement mortar 1:3 complete all as specified and directed by Engineer-in-Charge. | 8 | 10 Sqm | 1,100 ₹8,800 | 200 ₹1,600 Lowest | 1,000 ₹8,000 | 700 ₹5,600 | 650 ₹5,200 | 330 ₹2,640 | 390 ₹3,120 | 1,000 ₹8,000 |
| 8.00 | M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan exceeding 6m mean radius in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. | 3 | Cum | 6,000 ₹18,000 | 6,000 ₹18,000 | 7,000 ₹21,000 | 4,500 ₹13,500 | 4,000 ₹12,000 Lowest | 6,000 ₹18,000 | 4,000 ₹12,000 Lowest | 5,000 ₹15,000 |
| 9.00 | M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. | 350 | Sqm | 290 ₹1,01,500 | 180 ₹63,000 | 250 ₹87,500 | 199 ₹69,650 | 145 ₹50,750 | 290 ₹1,01,500 | 160 ₹56,000 | 131 ₹45,850 Lowest |
| 10.00 | M&L for 15mm thick rendering on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. | 250 | Sqm | 280 ₹70,000 | 185 ₹46,250 | 250 ₹62,500 | 220 ₹55,000 | 145 ₹36,250 | 310 ₹77,500 | 170 ₹42,500 | 130 ₹32,500 Lowest |
Tender Value
₹17.7 L
EMD Value
₹35,400
Closing Date
16 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 861 EWS
GE 861 EWS c/o 56 APO
REPAIR TO DRAINS PCC PATH HARD STANDING FENCING SECURITY WALLS PARAPET WALLS AND ALLIED WORKS AT KHREUH AND SHER E SHALI UNDER GE 861 EWS
2025_MES_715339_1
GE 861 EWS-28 (T)/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE 861 EWS
As per Tender Documents
7 documents required · 7 mandatory
₹500
Yes
GE 861 EWS
₹35,400
Yes
29 Sept 2025
18 Jun 2025
23 Jul 2025
18 Jun 2025
16 Jul 2025
2 Jul 2025
Amount
Demolition of cement concrete in ground floor and paving n.exe 15 cm thick below or above ground level complete all as specified and directed by Engineer-in-Charge.
Demolition of brick or stone masonry built in cement mortar including all necessary arches, quoins, pillars etc but excluding ashlar facings, dressed stone work and precast concrete artilces complete all as specified and directed by Engineer-in-Charge.
Demolition of reinforced cement concrete of any description (reinforcement cut as reqduired to facilitate demolition) complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed by Engineer-in-Charge.
M&L for squared rubble walling , brought upto courses , well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
M&L for flush pointing to random rubble masonry in cement mortar 1:3 complete all as specified and directed by Engineer-in-Charge.
M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan exceeding 6m mean radius in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L for 15mm thick rendering on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L for 50mm thick, PCC 1:3:6 type C-1 as in plinth protection, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:2:4 type B-1, (using 20mm graded crushed stone aggregate) as in grouting of angle posts, pillars, coping, plinth courses, parapets and railings etc. including necessary form work complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:2:4 type B-2, (using 40mm graded crushed stone aggregate) as in surface channel and drains complete all as specified and directed by Engineer-in-Charge.
M&L for pre-cast cement concrete (reinforced ), type B-1, 1:2:4, using 20mm graded crushed stone aggregate as in manholes cover slab set in cement mortar 1: 4 including necessary form work complete all as specified and directed by Engineer-in-Charge.
M&L for precast cement concrete, type B0 1:2:4 (using 12.5 mm graded crushed stone aggregate) louvers and jallies, 40 mm thick (measured solid) including pre-cast pillars of size 125 mm x15 mm in section all moulding, complete set in cement mortar (1:4) on wall etc. complete all as specified and directed by Engineer-in-Charge.
M&L for RCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 span beam supported on walls etc. complete all as specified and directed by Engineer-in-Charge.
M&L for RCC M-25 design mix, as in slabs supported on walls, beams and column in floors, roof landings, balconies, canopies, deck slabs, culverts supported on walls etc complete all as specified and directed by Engineer-in-Charge.
Form work to edges of concrete flats, breaks in floors, opening in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 20 cm wide complete all as specified and directed.
Form work to edges of concrete flats ,breaks in floors,opening in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 10 cm but n exc. 20cm wide complete all as specified and directed by Engineer-in-Charge.
Form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work not exceeding 200mm thick complete all as specified and directed by Engineer-in-Charge.
M&L for mild steel TMT bars, 10mm dia and over, cut to length bent to shape required including cranking bending spirally for columns, hooking end and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in-Charge.
M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm d cut to length bent ta in stirrups, spacer and binders etc. complete all as specified and directed by Engineer-in-Charge.
Dismantling structural steel work including doors, gates, grills but excluding framed truss etc. complete all as specified and directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description as in angle iron not otherwise provided for etc. complete all as specified and directed by Engineer-in-Charge.
S&F angle iron for posts, struts in fencing including cutting tops, to shape as required, drilling holes, notching for wire, including welding etc, confirming to Fe-290 Gde, E-165. complete all as specified and directed by Engineer-in-Charge.
S&F framed work such as grills, gratings etc, with ends of bars, soldered, end or riveted or forged into spikes framed guard bars barrel iron doors ladders, framed balusters walk ways, railings, framed water tanks and similar works confirming to Fe Fe 290 Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
S&F framed work as in doors or gates of angle or other section with gusset plate, rails braces etc, complete drilling for fixing of steel sheeting, hanging, fastenings and fixing complete all as specified and directed by Engineer-in-Charge.
S&F in repairs for galvanised , 2 strand , steel barbed wire, 2.24 mm dia barbed with 2 mm dia barbs, 75 mm spacing and straining and fixing to any type of standard rails and straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire complete all as specified and directed by Engineer-in-Charge.
M&L for 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded aggregate ) as in sub base for floors for receiving floor finishes etc. complete all as specified and directed by Engineer-in-Charge.
M&L for chequered cement concrete tiles glossy finished 30cm x30cmx25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
M&L for 100 mm thick PCC (1:2:4) type B2 (using 40 mm graded crushed stone aggregate) as in hard standing floor finishes etc. laid in alternate panels complete all as specified and directed by Engineer-in-Charge.
M&L for coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15656 -2006 of 60 mm thick M-35 with grey cement and pigment including dismantling of old paver blocks complete all as specified and directed by Engineer-in-Charge.
All as per the description of item no. 32 here-in- above but except interlocking paver blocks including dismantling of old paver blocks and refixing the same complete all as specified and directed by Engineer-in-Charge.
M&L for sand filling under floors or foundation, and as cushion to interlocking paver blocks complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new surfaces of steel over 10cm in width or girth and applying with two coats of synthetic enamel paint over coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.
M&L for preparing new plastered or un plastered surface of walls and applying two coats of Cement base paint on walls over a coat of alkali?resistant priming paint complete all as specified and directed by Engineer-in-Charge.
M&L for preparing old plastered or un plastered surfaces of walls and applying two coats of Cement base paint on walls complete all as specified and directed by Engineer-in-Charge.
M/S A.N CONSTRUCTIONs (BID ID -3349767)
SAMEER CONSTRUCTIONS (BID ID -3352748)
M/s Haji Mohd Sultan Sofi (BID ID -3360841)
M/s AMIR MAQBOOL (BID ID -3358842)
M/S MATOO INFRASTRUCTURES PVT. LTD. (BID ID -3360873)
M/S TAJ DIN KHARI (BID ID -3360122)
M/S MAHIR MUNEER (BID ID -3352541)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .