special repairs to ARS NO 28 AA01 at suschintharam -1 in kanyakumari district.

Amount

Dismantling , Clearing away and carefully stacking materials useful for reuse for any thickness of wall a) Dismantling Wheathering course & Pressed Tiles in Roof Portion

Dismantling Plain Cement Concrete flooring

Clean removal of cement plaster

Dismantling Brick / stone masonry in lime mortor walls

Supplying and filling foundation and basement of M Sand in layers not more than 15cm thick well watered rammed and consolidated etc complete complying with standard specification

Cemet Concrete 1:5:10 (one cement,four sand, eight aggregate) using 40mm gauge HBG stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick well rammed etc., complete complying with standard specifications and as directed by the departmental officers

Brick work in cement mortor 1 : 5 ( one cement and five sand ) using II Class chamber burnt bricks of size 9” x 4 3/8 ‘’ x 2 ¾’ for foundation and basement including scaffolding, curing etc complete complying with standard specifications and as directed by the departmental officers

Plastering with Cement mortor 1:5 (one cement, five Msand) with 20 mm thick including cost of all materials, labour charges for finishing and curring etc., complete

Flooring with scratch proof premium grade Double charged vetrified tiles of approved quality and colour of size 600 x 600 x 8 mm of best laid over 20mm thick cement mortar 1:3 base above the existing bed concrete and pointing with the same colour cement added with the colouring pigments etc., complete complying with standard specification

Providing weathering course in brick jelly lime concrete using best quality broken brick jelly of 20mm size in pure slaked lime ( no sand to be added ) over RCC roof slab, the projection being 32:12.5 by volume and single layer for required depth and laid with required slope and thickness by beating the concrete with wooden beaters of approved pattern keeping the surface constantly wet by sprinkling lime jiggery water as per standard specification etc complete as directed by the departmental officers

Finishing the top of roof with one course of PRESSED tiles of size 23 x 23 x 2 cm of approved quality in cement mortar 1:3 ( one cement and three Msand) 12mm thick mixed with water proofing compound confirming to IS at 2% by weight of cement used and the top pointed with same mortar is mixed with red oxide to the full depth of tiles etc., complete complying with standard specifications and as directed by the departmental officers

Finishing the top of roof with one course of OLD PRESSED tiles of size 23 x 23 x 2 cm of approved quality in cement mortar 1:3 ( one cement and three Msand) 12mm thick mixed with water proofing compound confirming to IS at 2% by weight of cement used and the top pointed with same mortar is mixed with red oxide to the full depth of tiles etc., complete complying with standard specifications and as directed by the departmental officers

Painting the old wall surface using best quality of Plastic emulsion paint two coats with one coat of primer as per the specification of the approved colour to give even shade including cost of primer,brush & butty etc., complete complying with standard specification. (The paint to be used should got approved by the departmental officer before use on works).

Painting OLD iron works with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors . The rate is inclusive of cost of all materials and labour , brushes and scaffolding charges etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

HARINI CONSTRUCTIONS (BID ID -1074232)