Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.9 LAccepted-Finance | L1 | Accepted-Finance ACCEPT | |
| 2 | L2₹6.9 L+₹659.10 (0.10%)Accepted-Finance | L2 | Accepted-Finance ACCEPT |
Tender Value
₹8.1 L
EMD Value
₹8,090
Closing Date
2 May 2023, 3:00 pmClosed
BDO(VP), Pernamallur
BDO(VP), Pernamallur
Construction of kitchen shed at PUES Poongunam, Pernamallur Block
2023_RDTN_306010_1
A1/1384/2023
Open Tender
Civil Works - Buildings
Item Rate
120 days
Pernamallur
Please refer Tender documents.
9 documents required · 9 mandatory
₹0
₹8,090
Yes
10 May 2023
25 Apr 2023
2 May 2023
25 Apr 2023
2 May 2023
25 Apr 2023
Amount
Construction of Kitchen shed building at PUES in Poongunam Panchayat
Earth work excavation and depositing on bank in all classes of soils except hard rock with an initial load and lift as per 8 S 20B.
Refilling the foundation with excavated earth including consolidation as directed by the TWAD Board officers
Cement Concrete 1:4:8 mix using 40mm ISS size HBG mutal, including cost, coveyance and all labour charges etc., complete.
Brick work in CM 1:5 mix using country bricks of size 8 3/4" x 4 1/4" x 2" including cost, conveyance and all labour charges etc., completed.(upto Basement)
Brick work in CM 1:5 mix using country bricks of size 8 3/4" x 4 1/4" x 2" including cost, conveyance and all labour charges etc., completed.(Basement to G.floor)
Centering and shuttering charges using Casurina props including cost and conveyance of all materials to sites all labour charges etc., completed
Centering and shuttering charges using Casurina props including cost and conveyance of all materials to sites all labour charges etc., completed
RCC 1:1.5:3 mix, using 20mm ISS size HBG metal including cost, conveyance and all labour charges etc., completed
Supply and fabrication of steel for all RCC works, including cost, conveyance and all labour charges etc., completed
Plastering with CM 1:5 mix, 12mm thick including cost, conveyance and all labour charges etc., completed.
Ceilling plastering with CM 1:3 mix using 10mm thick including cost, conveyance and all labour charges etc., completed
Paving the Scratch proof ceramic tiles of size 305mmx305mmx6mm
Distembering with two coau using best shell lime including cost and all labour charges etc complete
Painting two coats with approved Ready mixed emulsion paints over one coat of primer including cost and conveyance of all to site
Painting two coats over new Iron work including cost, conveyance and all labour charges etc, complete
Supply and fixing of cuddapha slab of all size including cost and coneyance and all labour charges etc
Cost and supplyof steel door including cost and all labour charges etccomplete
Cost and supply of Steel windows of various sizes including cost conveyance and all albour charges etc complete.
Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC Open Light point / fan point (For electronic Regulator) SD 18
Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36
Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 64
Supply and run of 2 X 1.5 sq.mm (22 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 69
Supply and fixing of WT bulk head fitting with guard ( Philips / Bajaj / Crompton / K Lite ) suitable for incandescent lamp with 60 W bulb.SD 84
Supply and fixing of CFL bulb SD 80
Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 110
Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD Earthing SD 142
Suplly and fixing of AC Exhaust fan 12 "
Provision for Name board Charges
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
B.Prabakaran
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .