shifting of 2nd pump of 1000 GPM, Make - Kirloskar oil engines Itd. from one place to other place within 40 mtrs. radius, due to increased water level in sump also Laying and welding of 8 inch dia. 30 mtrs, pipeline new extension near pump 34 delive

Amount

PART - A ( PUMP SHIFTING WORK ) Making of Discharge pipe as per Requirement Welding of 8" dia pipe to pipe for jointing by gas/electric welding M/C, 30 Mtr (5X63.84X3=957.6 Cm) for jointing of pipe.

Making bend delivery side 6" dia pipe line cutting of pipe 2X63.84=127.68 Cm. Jointing by welding and bending pipe 2X3X63.84 = 383.04 Cm. Total = 510.72 Cm.

Cleaning of sump Cleaning of sump to make it suitable for suction of mud free waterExcavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. All kinds of soil. (4m X 3m X 3m)= 36 cum x2=72 cum

Making Base and Fixing of pump water engine Loading unloading, dismantalling and fixing of 1000 Gpm pump from one place to another with in range of 5 km

Making Basę for pump By Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Hard rock. (3m X 3m X 3m) 27 cum x2=54 cum

Laying of pipe above ground 8" dia. 30 mtrs. Gl Pipe (42.56kg/m X 30 mtrs.)

Providing 8" Carbon steel forged blind flange

Fixing 8" DIA Flange. (2X2X63.84 = 255.36 Cm.) welding.

Providing and fixing bolts including nuts and washers complete.

1" inch cast iron screwed end ball valve

1/2" inch carbon steel screwed end ball valve

PART-B (EXTENSION OF DELIVERY SIDE) Welding of 6" dia pipe to pipe for jointing by gas/electric welding M/C, 480 Mtr (80X51.75X3 =12420 Cm) for jointing of pipe.

Laying of pipe above ground 6" dia, 480 mtrs. MS Pipe (21.2kg/m X 480 mtrs.)

PART-C (LAYING & WELDING OF DELIVERY SIDE) Welding of 4" dia pipe to pipe for jointing by gas/electric welding M/C, 540 Mtr (90X3X31.91 = 8615.70 Cm) for jointing of pipe.

Dismantling of unused 4" dia pipe from 44 & 32 number coal stock sump) by gas/electric welding M/C, 230 mtrs. (38X31.91 = 1212.58 Cm) for cutting of pipe.

Making bend 4" dia pipe line cutting of pipe 6X31.91 191.46 Cm. Jointing by welding and bending pipe 3X3X31.91 = 287.19 Cm. Total = 478.65 Cm.

Providing non return valve 100 mm

Providing getway foot valves for water 100 mm

2" inch cast iron screwed end ball valve

Providing G.I. Internal Thread Rigid Gl pipe - Size 50 mm NB

Providing and fixing hot-finished seamless (HFS) Barrel nipples steel pipes fitting 50 mm

Laying of pipe above ground 4" dia. 540 mtrs. Gl Pipe (14.4 kg/m X 540 mtrs.)

Labour charge(10daysX6)= 60 (PartA + Part B + PARTC)

Welder

Supervisor

Total impact of GST for the purpose of CTC

M/S MAA CONSTRUCTION (BID ID -1117140)