Renovation Interior fitout work for admin building, Hostel Block, Residential block and misc. civil of the Institute NIPCCD at New Delhi

GRAND TOTAL 99,129,051.00

GRAND TOTAL 73,836,313.90

GRAND TOTAL 25,292,737.45

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RAT TOTAL TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RAT TOTAL TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Dismantling tile work in floors and roofs laid in

1.1 15.23 cement mortar including stacking material within

50 metres lead.

For thickness of tiles above 10 mm and up to 25

Dismantling doors, windows and clerestory

windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete

and stacking within 50 metres lead:

15.12.1 Of area 3 sq. metres and below EACH 699 367.20 256,646.60

Dismantling wooden/aluminium / Gypsum

partitions,/ doors, windows, fixed glazing and

false ceiling including disposal of unserviceable

surplus material and stacking of serviceable

material with in 50 meters lead as directed by

Engineer-in-Charge.

Carriage of material by mechanical transport

including loading unloading and stacking

1.1.1 Lime, murrum, building rubbish

Demolishing brick work manually/ by mechanical

means including stacking of serviceable material

15.7 and disposal of unserviceable material within 50

metres lead as per direction of Engineer-in-

Dismantling stone slab flooring laid in cement

mortar including stacking of serviceable material

and disposal of unserviceable material within 50

TOTAL OF DISMANTLING 901,663.42

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

HOSTELS & Residential

S NO DESCRIPTION UNIT RATE QTY DSR-AMOUNT NON DSR-AMOUNT

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-

decorative type, core of block board construction with frame of 1st class hard wood and well

1 9.21 matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on

both faces of shutters:

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 2392.65 527.45 1,261,993.90

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss /

matt/ suede finish with high density protective surface layer and reverse side of adhesive

bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all

edges of flush door shutters (over all area of door shutter to be measured).

Providing and Fixing EMB 245 SS Mortise Lock Body SB/TB for door thickness 25-50 mm for

4 MR wooden doors of approved make and model all complete as per the direction of Engineer- Each 895.62 284.00 254,356.08

Providing and fixing stainless steel handles of grade 304 with necessary screws etc. of

5 NSI approved make complete as per direction of Engineer-in-charge :

Providing and fixing Stainless steel sliding door bolts of grade 304 with nuts and screws etc.

6 NSI complete as per direction of Engineer-in-charge. Each 350.00 568.00 198,799.99

Providing and fixing Stainless steel tower bolts of grade 304 with necessary screws etc. of

7 NSI approved make complete as per direction of Engineer-in-charge. Each 350.00 568.00 198,800.15

Providing and fixing factory made uPVC white Providing and fixing factory made uPVC

glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash

and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of

1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to

EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section

made of required shape & size as per CPWD Specification, uPVC extruded glazing beads,

interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM

gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head,

comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS

1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc.

Profile of frame, sash & mullion (if required) shall be mitred cut and fusion

welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing

hardware and drainage of water etc. After fixing frame the gap between frame and

adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of

approved size and quality, all complete as

per approved drawing conforming to CPWD specification & direction of

Two track two panels sliding door with Aluminium channel

for roller track, wool pile, zinc alloy (zamak) powder coated handle on every panel along

with multi-point locking system,

adjustable nylon rollers with SS 304 body.

9.147.B1.1 Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm &

x (74 mm & above). (Height upto 2.5 metre).

9 9.7.7 providing and fixing float glass panes

9.7.7.2 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). Sqm 2600.45 284.64 740,201.56

Digitally signed by AMIT

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

door/window/Celestory windows & other Frames/Chowkhat comprising of virgin PVC polymer

of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/

rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)

fabricated with miter joints after applying PVC solvent cement and screwed with full body

threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw

withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58

N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A

category with property of being termite/borer proof, water/moisture proof and fire retardant

and fixed in position with M.S hold fast/lugs/SS dash

fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S

hold fast/lugs or SS dash fasteners shall be paid for separately).

Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and

width of profile shall be acceptable. Variation in profile dimensions on plus side shall be

acceptable but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

decorative type flush door shutter of required size comprising of virgin polymer of K value 58-

60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice

husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having

minimum density of 650 kg/ cum and screw withdrawal strength of 1800 N (Face) & 900 N

(Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and

resistance to spread of flame of Class A category

with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to

be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot

melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required

size with necessary full body threaded star headed counter sunk S.S screws, all as per direction

of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be

paid separately)

Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade

marine ply as per IS : 710 of approved

brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws

12 9.169 etc. complete as per direction of Engineer-in-

Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood

particle board as per IS

15786:2008 of approved brand and shade with suitable

full threaded steel scr!=!ws etc. on the backing of racks, drawer, cupboard, kitchen

cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge.

Digitally signed by AMIT

Providing and fixing cupboard shutter with 19mm thick one side decorative and

other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of

approved brand including 2mm thick PVC edge banding tape with hot glue by edge

bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc.

14 9.168 complete as per direction of Engineer-in-charge.(Payment sqm 2,829.25 315.36 892,233.96

of providing and fixing auto closing hinges shall be paid

Providing and fixing stainless steel fancy handle of approved make fixed with 55

screws etc. complete as per

15 9.17 direction of Engineer-in-charge.

Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges

(hydraulic type) of approved make/brand to cupboard shutters with full threaded steel

16 9.171 screws including making necessary recess in board and finished etc. complete as per each 272.00 256.00 69,632.00

direction of Engineer-in- charge.

Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of

approved quality for cu pboa rd/wa rd robe shutters including necessary

17 9.174 synthetic resin hot pressed to edges on binding machine etc. complete as per directions meter 43.80 2315.27 101,408.99

of Engineer- in-charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work,

18 10.2 including cutting, hoisting, fixing in position and applying a priming coat of approved steel kg 133.7 2100.00 280,770.00

primer all complete.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3

19 10.5 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including

applying a priming coat of approved steel primer.

10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces Sqm 5804.35 11.71 67,969.15

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey

cement slurry mixed with pigment to match the shade of the slab, including rubbing and

polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm

(average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement

slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness

to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved

make, in all colours shade,except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick

cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm

including grouting the joints with white cement and matching pigments etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to

be specified by the manufacturer), of approved make, in all colours, shades except

burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers

of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand)

and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement

mixed with pigment of matching shade complete.

VITRIFIED FLOOR TILES

Digitally signed by AMIT

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of

approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :

4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with

white cement and matching pigments etc., complete. The vitrified tiles shall be from the

double/multi charged range of tiles.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer),

with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all

25 11.46 colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1

cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the

joint with white cement & matching pigments etc. complete.Note: - The vitrified tiles shall be

from the double/multi charged range of tiles.

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar

refractive index) > 78, solar reflection > 0.70

and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick

cement sand mortar in the ratio of 1:4 (1 cement : 4

26 12.55 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, sqm 1703.95 1288.66 2,195,815.12

including rubbing and polishing of the surface upto

3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in

the same manner.

FALSE CEILING WORKS

Providing and fixing false ceiling at all height including providing and fixing of frame work

made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of

120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm

wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one

flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,

other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts

& bolts of required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having

lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire

at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges

of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl

27 12.45 plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of

gypsum board to ceiling section and perimeter channel with the help of dry wall screws of

size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and

square edges of the board with recommended jointing compound , jointing tapes , finishing

with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats

of primer suitable for board, all as per manufacturer's specification and also including the

cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter

channels suitably fixed, all complete as per drawings, specification and direction of the

Engineer in Charge but excluding the cost of painting with

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board

with BIS certification marks)

Digitally signed by AMIT

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595 mm of

approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%,

Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per

(BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all

round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T

runners of 15x32 mm of length 3000 mm, cross T of size 15x32 mm of length 1200 mm and

secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size

600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50

mm long 8 mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod

up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm

28 26.27 centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the

help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be

fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry

wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support

system shall be pre-painted with polyester baked paint, for all heights. The work shall be

carried out as per specifications, drawings and as per directions of the engineer-in-charge

26.27.1 With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.60) sqm 2,333.60 0.00 -

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium

silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level,

suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @

120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints

to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet,

spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm

(Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form

a grid of 1200x600 mm and seconDSRy cross ‘T’ of length 600 mm and size 24 x28 mm made

of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to

from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall

angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with

the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm

interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved

texture in the grid, including, cutting/ making opening“for services like diffusers, grills, light

fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended

from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and

50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size

85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with

24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per

specifications, drawings and as directed by Engineer-in-Charge.

Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No

deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30

sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > sqm 2158.15 1144.33 2,469,637.63

85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having

thermal conductivity <0.043 w/mK.

Digitally signed by AMIT

BAFFLE CEILING: Providing & Installation of Baffle ceiling system comprises of 50mmx100mm

(50 mm width & 100 mm Height) U Shape panels in RAL color finish. Panels shall be made of

0.5 mm thick galvanized steel after Powder-coated and length up to 4000 mm. Panel shall be

high corrosion resistance and good color stability. Centre to Centre panel gap will be 150

mm. Panels are fixed on to roll formed carriers 20 mm wide x 40 mm deep out of 0.80 mm G.I

sheet Powder-coated color with cutouts to hold the panels in module of 50 mm at maximum

30 MR 1200 m c/c. Carriers are suspended from the roof or truss by 6 mm dia. galvanized steel wire Sqm 3950.00 100.65 397,570.01

rod hanger with special height adjustment suspension clip at max. 1200 mm c/c. Hangers are

fixed to the roof by ‘J’ hooks or ceiling brackets and nylon inserts. Panels are factory cut in

lengths up to maximum 4.0 m to suit site dimensions or shop drawings. Top cap and side cap

are used to cover the edges of the panels.

Supply and installation of Aluminium Framed Glass Partition for Access and Cabin System for

minimal frame, room dividing solutions.Single glazed mullion free demountable glass partition

using Toughened/ Laminated glass in proprietary natural anodised/Black aluminium sections

ALT 50 of size 50mm x 30mm with Concealed sealing (No visible Gaskets/Seals) with acoustic

rating of Minimum 32 db with third party test certificate. The profile will have Carpet/tile

Groove at the Bottom on both sides for accomodating max. 8mm carpets. THe Glass to be

fixed with help of Proprietary Stability GRIPPER Clamp to have a stable system. It should

consists of intermediate slim junction profiles for Glass to Glass vertical joints, 90 Degree L

Junction and T Junction profiles suitably to be used as per room configuration designs.No

VISIBLE Clip Lines to provide clutter free view at both side of section. The Glass to be Offset

mounted towards outer edge leading to minimum aluminium frame on one side. Optional

Profile Bottom Seal pair for additional accoustic. Glass thickness-10 (LSG).shall be included in

Providing and Fixing FHHS 3100 (EN 1154) - Double cylinder Floor Spring with Top-Bottom

Patch,pivot and Bottom Patch Lock Maximum door weight 100 Kg. Maximum door width

1000 mm.Closing speed : 120°,Final closing speed : 15-0°. Hold Open (standard): 90° hold

open.Suitable for 10-12 mm glass

Weight of floor spring approx : 6kg

5 Years Warranty against manufacturing defect with 5,00,000 cycles Tested approved make

and model all complete as per the direction of Engineer-in-charge.

Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect

film to reproduce Sand-blasting effect on glass with customised designs, thickness of 2 mil

(0.05mm) without adhesive & 3mil (0.8)with adhesive having minimum tensile strength of 3.5

pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4

pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to

direct sunlight) to 15yrs (indoors) must be endorsed by 3M India Limited Architectural Market

Department. Contractors payment wouldn't be released until & unless he/she produces

orginal warranty certificate from the manufacturer.

Digitally signed by AMIT

Providing & supplying of Window Blinds as per the approved sample in required shade and

style consisting, of Roller Blinds comprising of optima screen Fabric comprising of 22%

polyester, 78% PVC, Fabric weight 460-480G weight per sq m, Thickness 0.67 mm, Yarn count

18-19/cm, having fire resistance standard – NFPA 701-89 small testing ISO-5659-2 .The tear

resistance should be complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT

shall be of clutch for quick,easy and safe installation,moulded plastic with steel spring support

and inserted into the tube end. It shall be driven by a ball chain pulley with ball chain and

can be positioned at right side or left hand side of the Shade. The Shade when lowering or

raising, shall be automatically locked in position upon release of the ball chain by means of a

built in friction lock.Universal clutch for left and right hand operation.Chain Gear Ratio of

1.75:1.The END PLUG shall be molded of plastic witha steel location pin. The plug shall be

inserted into the tube end. (Opposite to the Drive Unit) for ease of installation. TheSUPPORT

BRACKETS shall be of coated steel & provided with covers and used in right hand or left hand

positions differentiated by the acceptance of the of the rectangular drive unit support or the

round idler plug pin.Can beinstalled (a) On Face (b) Ceiling Mount (c) On Frame (d) in

Recess. The Bracket should be protruding outside maximum of80mm.The ROLLER TUBE shall be

of extruded aluminum with 37mm internal diameter & skin thickness of 1mm and shall

incorporate a key way integral with the tube to accommodate the spline. The BOTTOM RAIL

shall be a Flat Bottom made up of powder coated steel. The BALLCHAIN shall be 2mm

diameter cord with 4.5mm diameter acetal balls moulded co-axially to it on 6mm pitch to

form an endless ballchain.It is used for raising or lowering action of the shades.

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm high and in

line with external glazing as per details of Architect. Rate to include finishing exposed surfaces

35 MR of the Pelmet with enamel paint of approved shade or 1mm laminate. RM 1781.74 -

LAMINATE CLADDING- P/F 1 mm thick laminate including 4 mm thick MDF as per t design for

36 MR passage wall plywood panelling complete with filling of grooves with matching or contrast SQM 1590.00 30.00 47,699.99

color, as per the direction of the engineer in charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 1123.80 60.00 67,428.00

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of

half brick masonry.

39 13.4 12 mm cement plaster of mix :

Providing and applying white cement based putty of average thickness 1 mm, of approved

40 13.8 brand and manufacturer, over the plastered wall surface to prepare the surface even and sqm 156.05 9833.97 1,534,591.30

smooth complete.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to

prepare the surface even and smooth complete.

13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC

(Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and

42 13.83 manufacture, including applying additional coats wherever required to achieve even shade

13.85Applying priming coats with primer of approved brand and manufacture,

having low VOC (Volatile Organic Compound ) content

With water thinnable cement primer on wall surface having

VOC content less than 50 grams/litre

Digitally signed by AMIT

Washed stone grit plaster on exterior walls height upto 10 metre above

ground level, in two layers, under layer 12 mm cement plaster 1:4 (1

cement : 4 coarse sand ), furrowing the under layer with scratching tool,

applying cement slurry on the under layer @ 2 Kg of cement per square

metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand

44 13.72 : 2 stone chipping 10 mm nominal size), in panels with groove all around Sqm 1162.25 232.34 270,039.50

as per approved pattern, including scrubbing and washing the top layer

with brushes and water to expose the stone chippings ,complete as per

specification and direction of Engineer-in-charge (payment for providing

grooves shall be made separately).

Glass Partitioning: GLASS PARTITIONING:- Providing and fixing 12 mm thick frameless glass

Partition of approved brand and manufacture, including providing and fixing over aluminium

channels embedded in the floor and supported at the top as detailed. The Partition to be

fitted firmly to the true ceiling with necessary anchors / fastners. All the edges of the glass shall

have pencil nosing and machine polished. the joints in glass shall be filled with colourless

silicon sealent all complete as per Direction of Engineer-in-charge

Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up stanDSRd tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia

46 21.1 and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with

required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,

straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium

snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash

fasteners to be paid for separately) :

21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 530.9 12224.17 6,489,813.34

Filling the gap in between aluminium frame, Upvc frame & adjacent RCC/ Brick/ Stone work

47 21.8 by providing weather silicon sealant over backer rod of approved quality as per architectural

drawings and direction of Engineer-in-charge complete.

21.8.1 Upto 5mm depth and 5 mm width metre 96.75 1596.96 154,505.88

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand

48 21.18 and manufacture, including providing and fixing top & bottom pivot & spring type fixing sqm 5325.9 20.00 106,518.00

arrangement and making necessary holes etc. for fixing required door fittings, all complete as

per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by

applying cement slurry mixed with water proofing cement compound consisting of applying

49 22.5 a) First layer of slurry of cement @ 0.488 kg/sum mixed with water proofing cement compound sqm 617.05 215.98 133,270.78

@ 0.253 kg/sum. This layer will be allowed to air cure for 4 hours.)b. Second layer of slurry of

cement @ 0.242 kg/sum mixed with water proofing cement compound @ 0.126 kg/sum. This

layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.

(The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions

of pipes and masonry with polymer mixed slurry.)

Providing and laying in position cement concrete of specified grade excluding the cost of

50 4.1 centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived fromnatural sources : 8 graded stone

4.1.8 aggregate 40 mmnominal size derived from natural sources) cum 6812 24.98 170,163.51

Digitally signed by AMIT

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness)

including attached pilasters, columns, piers,

abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed

blocks, anchor blocks, plain window sills, fillets,

sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:

1:5:10 (1 cement : 5 manufactured sand derived from Recycled Concrete Aggregate (RCA) :

10 graded stone

aggregate 40 mm nominal size Recycled Aggregate

Preparation of complete set of drawings including finishing,details, design calculations etc. and any

44 MR other details as and when desired by Engineer In charge /client. A qualified professsional for the LS 739879.00 739,879.00

purpose shall be appointed after due appproval from Engineer In Charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class

6.4 designation 7.5 in superstructure above plinth level up to floor V level in

all shapes and sizes in

Cement mortar 1:4 (1 cement :4 coarse sand)

12 mm cement plaster of mix :

1:4 (1 cement: 4 coarse sand)

13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC

1 13.83 (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and

manufacture, including applying additional coats wherever required to achieve even shade

13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC

13.83 (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and

manufacture, including applying additional coats wherever required to achieve even shade

Modified estimated cost after using correction factor on DSR 2023 on

account of GST @ 0.973

GRAND TOTAL (Carried Forward) 41,425,742.85

GRAND TOTAL (Carried Forward) 41,425,742.85

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

HOSTELS & Residential

BOQ ELECTRICAL WORK

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT Total QTY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface /

1.1 recessed medium class PVC conduit, with modular switch, modular plate, suitable

A.1 GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper

conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point

(without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper

A.2 conductor single core cable in surface / recessed PVC conduit, and earthing the

point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper

conductor single core cable in surface/ recessed medium class PVC conduit

alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable

for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular

1.24 plate & switch box including connections but excluding modular plate etc. as -

1.24.4 3 pin 5/6 amp socket outlet Each 271 122.00 33,062.00

1.24.5 6 pin 15/16 amp socket outlet Each 138 197.00 27,186.00

Supplying and fixing modular blanking plate on the existing modular plate &

switch box excluding modular plate as required.

Supplying and fixing following size/module, GI box along with Modular base & cover

1.27 plate on existing modular metal boxes etc. as required. -

B SUBMAIN AND CONTROL WIRING 0 -

Wiring for circuit/ submain wiring alongwith earth wire with the following

1.14 sizes of FR PVC insulated copper conductor, single core cable in surface/ -

recessed medium class PVC conduit

Digitally signed by AMIT

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 670 334.00 223,780.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 290 439.00 127,310.00

Supply, fabrication and fixing of steel frame work in position for cable

tray/Panels fabricated out of 10 mm dia GI rods, ISA-40 MS angle iron, ISMC-50

B.2 channels, flats etc.complete with providing of Anchor fastners and all necessary -

hardwares as required for fixing, including cutting, bending, welding, drilling,

bolting etc. as per design as required and painted with one coat of primer and

two coats of enamel paint of approved shade.

Supply and fixing of Perforated type 2mm thick Hot dip Galvanised G.I. cable tray of

following sizes complete with bend/tee joints, coupling plate & nuts bolts etc. as

required for fixing and including the cost of providing loop earthing with 2 nos.

50 mm x 6 mm GI earth strips complete as per specifications, as required and as -

B.3 GI Raceway & Junction boxes ( Raceway on floor shall be of aluminium only) -

Providing and fixing 2 mm thick steel sheet factory fabricated post galvanized

raceway with internal partition/compartmentized of the following sizes

including providing removable 3 mm thick GI cover, knock out holes and fixing

accessories earthing with 8 SWG copper earth wire complete as required -

including floor supports, bends, access boxes, tap off boxes and cross over as

per specification and site requirement. (overhead / wall mounted recovery &

function boxes shall be 1.6 mm thick)

c) MR 150 mm wide x 38 mm deep raceway RM 50 1,290.20 64,509.99

Providing and fixing 150 x 150 x 60 mm deep 1.6 mm thick GI sheet junction 61,480.43

7.4 MR box including providing 3 mm thick stainless steel cover as per specification. Nos. 40 1,537.01

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature

2.10 circuit breaker suitable for inductive load of following poles in the existing MCB -

C.2 DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing

2.13 MCB DB complete with connections, testing and commissioning etc. as required. -

Supplying and fixing following way, horizontal type three pole and neutral,

sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned

C.4 2.4 copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder -

painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator)

Digitally signed by AMIT

DSR 2.5 Supplying and fixing of following ways surface/ recess mounting, vertical type,

415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder

painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din

bar for mounting MCBs (but without MCBs and incomer) as required . (Note :Vertical

type MCB TPDB is normally used where 3 phase outlets are required.)

DSR 2.5.2 8 way (4 + 24), Double door Each 5 2642.00 13,210.00

Supplying and fixing following rating, double pole, (single phase and neutral), 415

2.14 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 -

C.5 milliamperes in the existing MCB DB complete with connections, testing and

commissioning etc. as

Design, Manufacturing, Supply, Commissioning & Testing of Main LT Panel. The panel will be totally

enclosed type with, free standing, floor mounted, indoor duty, dust & vermin proof, , front operated,

electrical panel fabricated from 2 mm thick M.S. Sheet as per specifications & drawing laid in this

C.6 NSI document and will be complete with the main and auxiliary bus bars, multimeter, indication lamps,

CT's, protection MCB, interconnection wiring, earth bus and will be powder coated

finish with 50 micron thickness.

I/C-160A FP MCCB

Bus baar-200 amp

8 set of 100 TP MCCB,

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated,

ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos.

blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper

winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air

D1 DSR-19.1 delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less Each 70 2730.00 191,100.00

than 10%, remote or electronic regulator unit for speed control and all remaining

accessories including safety pin, nut bolts, washers, temperature rise=75 degree C

(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single

phase AC Supply, earthing etc. complete as required.

Supply, Installation, Testing and Commissioning of 300 mm dia Domestic Exhaust Fan 28,800.00

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

HOSTELS & Residential

BOQ PLUMBING AND SANITORY WORK

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT Total QTY RATE

2022 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of SINGLE LEVER

CONCEALED BASIN MIXER (WALL MOUNTED) WITH SPOUT

1 MR (COMPOSITE ONE PIECE BODY) Model No. SIG-CHR-41233 or EACH 58 21,500.00 1,247,000.00

Supply, Installation, Testing and Commisioning of TABLE TOP

2 MR BASIN, SIZE: 410x410x130 mm Model No VCS-WHT-503901 or EACH 58 18,942.00 1,098,636.00

Supply, Installation, Testing and Commisioing of suitable

3 MR compatible WASTE COUPLING 32MM- FULL THREAD- WITH EACH 58 1,850.00 107,300.00

CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP Model

Supply, Installation, Testing and Commisioing of BOTTLE TRAP

4 MR (WITH INTERNAL PARTITION) 32mm SIZE WITH 300mm & 190mm EACH 58 1,850.00 107,300.00

LONG WALL CONNECTION PIPES & WALL FLANGE (Model No.ALD-

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND

5 MR INSTALLATION WALL HUNG WC WITH UF SOFT CLOSE SLIM SEAT EACH 58 13,797.00 800,226.00

COVER, HINGES AND ACCESSORIES

Supply, Installation, Testing and Commisiong of PNEUMATIC

6 MR CONTROL PLATE ACPWHT- EACH 58 6,195.00 359,310.00

5012505 or equivalent)

Supply, Installation, Testing and Commisiong of CONCEALED

8 MR STOP COCK WITH ADJUSTABLE WITH WALL FLANGE 15mm SIG- EACH 52 4,589.00 238,628.00

CHR-41083 or equivalent)

Supply, Installation, Testing and Commisiong of HAND SHOWER

9 MR (HEALTH FAUCET) WITH 8mm DIA 1.2 METER LONG FLEXIBLE EACH 52 2,375.00 123,500.00

TUBE AND WALL HOOK ALD-CHR-573 or equivalent

Supply, Installation, Testing and Commisiong of PNEUMATIC

10 MR SINGLE PIECE SLIM CONCEALED CISTERN BODY WITH EACH 52 7,381.00 383,812.00

INSTALLATION KIT & “S-TYPE” DRAIN PIPE CONNECTION SET FOR

Providing and fixing PTMT towel rail complete with brackets fixed

11 17.73 to wooden cleats with CP brass screws with concealed fittings

arrangement of approved quality and colour.

450 mm long towel rail with total length of 495 mm, 78 mm 55,218.80

17.73.1 wide and effective height of 88 mm, weighing not less than Each 82 673.40

Providing and fixing PTMT soap Dish Holder having length of 138 9,138.90

12 18.65 mm, breadth 102 mm, height of 75 mm with concealed fitting Each 82 111.45

arrangements, weighing not less than 106 gms.

Digitally signed by AMIT

Providing and fixing mirror of superior glass (of approved quality) 83,613.40

complete with 6 mm thick hard board ground fixed to wooden

13 17.31 cleats with C.P. brass screws and washers complete. EACH 52 1,607.95

Providing and fixing toilet paper holder

Providing and fixing C.P. brass angle valve for basin mixer and

18.53 gyser points of approved quality conforming to IS : 8931 0 -

15 mm nominal bore

Cutting chases in brick masonry walls for following diameter sand

17.61 cast iron/centrifugally cast (spun) iron pipes and making good the 0 -

same with cement concrete 1:3:6 (1 cement: 3 coarse sand: 6

Cutting holes upto 30x30 cm in walls including making good the

With common burnt clay F.P.S. (non modular) bricks

Making chases upto 7.5 X 7.5 cm in walls including making good

18 18.78 and finishing with matching surface after housing G.I. pipe etc. METRE 220 202.90 44,638.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all -

CPVC plain & brass threaded fittings, including fixing the pipe with

External work - Exposed on wall

32mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all -

CPVC plain & brass threaded fittings, i/c fixing the pipe with

Digitally signed by AMIT

Concealed work including cutting chases and making good the

20 walls etc. -

20mm nominal outer dia pipes

Providing and fixing C.P. brass long body bib cock of approved

18.51 quality conforming to IS standards and weighing not less than 690 -

15 mm nominal bore

Providing, fixing, jointing and testing in position of ISI marked UV

stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : -

13592 suitable for rubber ring joints, including all neccessary

The Pipes will be supported with threaded G I rods & U clamps

with nuts, washers etc on 50x50x5 mm slotted angle. The cost -

will include all support arrangements. The work includes

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 210 536.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 200 416.00

Providing, fixing, jointing and testing in position ISI marked

(IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for -

waste pipe from fixtures to floor trap including reduces, enlarger,

32 mm dia. METRE 245 129.00

Providing & fixing UPVC Floor trap of self cleansing design with

stainless steel grating complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser 27,872.00

Extra for providing & fixing 125 mm dia C.P. grating in place of 37,752.00

25 MR C.I. grating over floor traps. EACH 52 726.00

Providing & fixing of SS Floor Cleanout, round or square with 52,052.00

26 MR rubber seal and flat round cover with screws and other required EACH 52 1,001.00

fitting complete as required.

Digitally signed by AMIT

Providing and fixing urinal large size of approved size and quality

27 MR including all acessories like angle valve, spreader, waste pipe etc EACH 21 5000.00

complete as required.

Providing and fixing water closet squatting pan (Indian type W.C.

pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level

white P.V.C. flushing cistern, including flush pipe, with manually

controlled device (handle lever) conforming to IS : 7231, with all

fittings and fixtures complete, including cutting and making good

the walls and floors wherever required

White Vitreous china Indian pattern W.C. pan of size 580x440

mm with integral type foot rests

Providing & fixing of white vitreous china pedestal type water

closet(European type) with seat and lid, 10 liter low level white

viterous china flushing cistern C.P.flush bend with fittings &

29 17 C.I.brackets ,40mm flush bend, overflow arrangment with -

specials of standard make and mosquito proof coupling of

approved municipala design complete including painting of

fittings and brackets, cutting and making good the wall and Floors

17.2.1 W.C pan with ISI marked white solid plastic seat and lid EACH 24 3510.00 84,240.00

Providing & fixing wash basin with C.I. brackets, C.P brass pillar

taps,32 mm C.P. brass waste of standard pattern, including

painting of fittings and brackets,cutting and making good the

30 17.81 walls wherever required: White Vitreous China Wash basin size EACH 30 3200.00 96,000.00

630x450mm with a single 15 mm C.P.brass pillar taps.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as

per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,

including painting of fittings and brackets, cutting and making

good the walls wherever required :

Kitchen sink without drain board

610x510 mm bowl depth 200 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin

32 17.28 including P.V.C. waste fittings complete. -

Digitally signed by AMIT

PVC water tank of 2000 ltr capacty shall be made out by of 4mm 22,000.00

33 MR thick Complete all respect EACH 4 5500.00

PVC water tank of 1500 ltr capacty shall be made out by of 4mm 45,000.00

34 MR thick Complete all respect EACH 10 4500.00

Total of Plumbing & Sanitary Rs. 1,060,573.95 4,982,753.00

Modified estimated cost after using

correction factor on DSR 2023 on account of EACH 1,031,938.45 4,982,753.00

GRAND TOTAL (Carried Forward) 6,014,691.45

GRAND TOTAL (Carried Forward) 6,014,691.45

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

HOSTELS & Residential

BOQ WI-FI AND NETWORKING

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT Total QTY RATE

2022 DSR (INR) NON-DSR (INR)

(DSR Supply, Fixing & Laying of CAT 6 UTP cable 23 37,050.00

1.53.1) AWG solid copper conductors for Connectivity of METRE 650 57.00

1 Hub to End Point.High Speed Gigabit Ethernet

Supply , Installation , Testing and Comissioning of Nos. 16,000.00

I/O port for CAT6 cable termination 40 400.00

2 MR at Workt table end. Keystone Unshielded Outlet,

Supply , Installtion , Testing and Comissioning of Nos. 16,000.00

I/O port for CAT6 cable termination 40 400.00

3 MR at Work Table end Redantant . Keystone

Supply , Installtion , Testing and Comissioning of Nos. 16,000.00

I/O port for CAT6 cable termination 40 400.00

4 MR at Rack Side. Keystone Unshielded Outlet, 180DG

Supply , Installtion , Testing and Comissioning of Nos. 16,000.00

I/O port for CAT6 cable termination 40 400.00

5 MR at Rack Side end Redantant . Keystone Unshielded

Supply , Installtion , Testing and Comissioning of 16,000.00

CAT6 patch cord 2 Mtr (7 feet) for information Nos. 40 400.00

6 MR outlet (I/O) to end user device connectivity.High

Supply , Installation , Testing and Comissioning of 16,000.00

CAT6 patch cord 2 Mtr (7 feet) for information Nos. 40 400.00

7 MR outlet (I/O) to Rack end device connectivity.

Supply , Installation , Testing and Comissioning of 16,000.00

CAT6 patch cord 2 Mtr (7 feet) for information Nos. 40 400.00

8 MR outlet (I/O) to end user Redantant device

Supply , Installtion , Testing and Comissioning of 16,000.00

CAT6 patch cord 2 Mtr (7 feet) for information Nos. 40 400.00

9 MR outlet (I/O) to Rack End Redantant device

Supply , Installtion , Testing and Comissioning of Nos. 3,500.00

24 port Loaded Angled Staggred 1 3,500.00

10 MR Jack Panel for CAT6 cable termination at rack end.

Supply , Installtion , Testing and Comissioning of Nos. 3,500.00

24 port Loaded Angled Staggred 1 3,500.00

11 MR Jack Panel for CAT6 cable termination at rack end.

Digitally signed by AMIT

UTP Components for VOICE -

(DSR Supply, Fixing & Laying of CAT 6 UTP cable 23 28,500.00

1.53.1) AWG solid copper conductors for Connectivity of RM 500 57.00

12 Hub room to End Point.High Speed Gigabit

Supply , Installtion , Testing and Comissioning of Nos. 16,000.00

I/O port for CAT6 cable termination 40 400.00

13 MR at Work table end. Keystone Unshielded Outlet,

Supply , Installtion , Testing and Comissioning of Nos. 16,000.00

I/O port for CAT6 cable termination 40 400.00

14 MR at Rack end. Keystone Unshielded Outlet, 180DG

Supply , Installtion , Testing and Comissioning of 16,000.00

I/O port for CAT6 cable termination Nos. 40 400.00

15 MR at Rack End. Keystone Unshielded Outlet, 180DG

Supply , Installtion , Testing and Comissioning of Nos. 3,500.00

24 port Loaded Angled Staggred 1 3,500.00

16 MR Jack Panel for CAT6 cable termination at rack end.

Supply , Installtion , Testing and Comissioning of Nos. 3,500.00

24 port Loaded Angled Staggred 1 3,500.00

17 MR Jack Panel for CAT6 cable termination at rack end.

Supply , Installtion , Testing and Comissioning of 16,000.00

CAT6 patch cord 2 Mtr (7 feet) for information Nos. 40 400.00

18 MR outlet (I/O) to end user device connectivity.

TOTAL OF WI-FI DATA & NETWORKING 28,500.00 243,050.00

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

HOSTELS & Residential

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT Total QTY RATE

2022 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing & Commissioning of 220,000.00

1 MR 5MP IR IP H.265 Vandal Proof Dome camera Nos 22 10000.00

with 2.8 to 12mm Motorized Lens,Smart IR, up

Supply, Installation, Testing and 165,000.00

2 MR Commissioning of 16Ch Embedded Network Nos 6 27500.00

Video Recorder with 4 Sata Supports 1 ×

MR SITC of SSD Hard Disk Drive 6TB, 24/7 Nos 20000.00 120,000.00

3 surveillance category Only complete etc as 6

required.etc.all complete.

Supply, Installation, Testing & Commissioning of 32" 180,000.00

4 MR Flat Screen HD led (24X7) with Interfaces Nos 6 30000.00

include HDMI, DVI, D-sub, Component and

MR SITC of HDMI cables 10 meters M2M etc all Nos 6200.00 37,200.00

5 compelte. 6

6 MR Supply , Installtion , Testing and Comissioning of 41,325.00

sheilded twisted pair CAT 6 cable(STP) complete etc

as required 4 pair

TOTAL OF CCTV AMOUNT

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

HOSTELS & Residential

DSR NO DESCRIPTION TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT

S NO UNIT Total QTY RATE AMOUNT

2022 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of Recessed

luminaire with LED (Light Emitting Diode), system power: 28

W, luminous flux of 2800 lm, colour temperature of 6000 K,

Neutral white, 230 V constant current driver, 70% of luminous

flux after 50,000 operating hours, energy-efficient LEDs, CRI > 80,

CRI > 80, THD<5%, P.F>0.95, SDCM 3, direct light emission,

Luminaire housing in Aluminium Extrution, polyester white powder

coat applied over a 5- stage pre-treatment, Opal diffuser for

glare-free uniform light, integral electronic control gear 600

Supply, Installation, Testing and Commissioing of Recessed

downlightwith HPE (High-Performance Efficiency) with LED

(Light Emitting Diode), system power: 12 W, Luminous flux of

luminaire 1320 lm, 110 LM/W system efficacy, Colour

temperature of 4000 K, Neutral white, CRI > 80, 230V constant

current driver, 70% of luminous flux after 50,000 operating

2 MR hours; energy-efficient LEDs, direct light emission, housing in Nos 270 1395.00 376,650.00

die-cast aluminium, Polyester powder white coloured coat

applied over a 5-stage pre-treatment trim, prismatic diffuser

for homogenous light distribution, ZHLS (ZERO HALOGEN

LOW SMOKE) wiring, Electronic control gear,

Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm

Supply, Installation, Testing and Commissioning of 10W Mirror

Supply, Installation, Testing and Commissioning of 6 W wall light

complete as required.

Digitally signed by AMIT

Surface Mount IP20 4ft LED Batten of 20W having minimum

100lm/W. LM79-08 Report from authorized NABL Lab required to

6 MR verify system lumen output. Luminaire housing should be made of Nos 120 310.00 37,200.00

Aluminum Extrusion with PC diffuser. CCT of Luminaire 5700K with

ANSI binning, CRI >80Ra. LED Used should have a life of 35000

TOTAL LIGHTING WORK AMOUNT

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

HOSTELS & Residential

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT Total QTY RATE

2022 DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning Pcs

1 17.2.4 of intelligent analog addressable photothermal 0 2,858.00 -

detector complete with mounting base complete

Supplying, installation, testing & commissioning Pcs

17.2.14 of addressable manual call point complete as 8 3,871.00 30,968.00

Supplying, installation, testing & commissioning Pcs

17.2.15 of addressable horn cum strobe complete as 8 3,506.00 28,048.00

Supplying, installation, testing & commissioning Pcs

17.2.7 of fault isolator complete with base as required. 8 3,270.00 26,160.00

Supplying, installation, testing & commissioning Pcs

17.2.5 of response indicator on surface/recessed MS Box 8 276.00 2,208.00

having two LED, metallic cover complete with all

CABLES & ACCESSORIES FOR FAS :

Supplying & laying of 2x1.5 sqmm fire alarm RM

4 17.5.2 armoured cable, 600/1000V rated with annealed 320 173 55,360.00

copper conductor having XLPE insulation, steel

TOTAL FIRE ADDRESSAL System AMOUNT

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

HOSTELS & Residential

FURNITURE DETAILS

AMOUNT Reference Image

S No DRS NO. Item Details Item Description Unit Qty Rate

DSR (INR) NON-DSR

Providing and placing in position mid back chair.The seat is made up of 1.2± 0.1cm thk. Hot

pressed plywood. The back is made up of injection moulded glass filled nylon & upholstered

using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR

polyurathene foam is moulded with density =55+/-2 kg/m cube and hardness 16± 2 kgf as per

is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.5 ± 0.5cm which is

provided in armrest structure. Armrest top has an integrated layer of thermoplastic elastomer.

Armrest is made up of plastic injection moulded nylon with textured top. It shall have Front

for work station ,

1 MR pivot synchro mechanism with following features. 360 degree revolving type, Single point Nos 6 11,500.00 69,000.00

control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature,

seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled

polyurathene foam & covered with polyester fabric. The height of lumber pad can be

adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has

an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be

carried out as per guidance and instructions recieved from Engineer Incharge. It shall be SCS

IAQ certified for Indoor Air Quality.Complete all as per the direction of Engineer in Charge.

Providing and placing in position high back chair.The seat is made up of 1.2± 0.1cm thk. Hot

pressed plywood. The back is made up of injection moulded glass filled nylon & upholstered

using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR

polyurathene foam is moulded with density =55+/-2 kg/m cube and hardness 16± 2 kgf as per

is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.5 ± 0.5cm which is

provided in armrest structure. Armrest top has an integrated layer of thermoplastic elastomer.

Armrest is made up of plastic injection moulded nylon with textured top. It shall have Front

High back chair

pivot synchro mechanism with following features. 360 degree revolving type, Single point

2 MR for All cabin & Nos 4 12,500.00 50,000.00

control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature,

seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled

polyurathene foam & covered with polyester fabric. The height of lumber pad can be

adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has

an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be

carried out as per guidance and instructions recieved from Engineer Incharge. This shall

come along a headrest from same family. It shall be SCS IAQ certified for Indoor Air

Quality.Complete all as per the direction of Engineer in Charge.

Providing and placing in position Study chair.The seat is made up of 1.2± 0.1cm thk. Hot

Study seminar pressed plywood. Chair Size:- 55cm(w) × 50cm (D). The lumber support consists mouled

chair polyurathene foam & covered with PU leather fabric.. It shall be SCS IAQ certified for Indoor

Air Quality.Complete all as per the direction of Engineer in Charge.

Providing and placing in position of main table of main table with overall size of table 1800 x

1650 x 750mm. The main table shall be of size 1800 x 750 x 750mm. The side unit shall be 900 x

400 x 675mm The table is made of 25 mm thick MDF.Both Side 1mm laminate pressed on to

top with 2 mm edge bending tape. Soft closing access flap within-build power box are

provided on work surface for wire management. The understructure is made of 25 mm thick

Director Cabin, Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching

4 MR Cabin 1 &2 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1- Nos 1 75,000.00 75,000.00

Table P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer

fronts made of 18 mm thick MDF one side pre-laminate board with 1mm laminate pressed on

to top with 2 mm edge bending tape pedestal construction is BOX-BOX-FILE type which uses

powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM.

Drawers have a soft closing . Handles are provided for ease of opening. Pedestals are

provided with lock for security.complete all as per the direction of Engineer-in-charge.

Digitally signed by AMIT

Providing and placing in position of reception table with overall size of table 1650 x 1600 x

750mm. The main table shall be of size 1500 x 675 x 750mm. The side unit shall be 900 x 375 x

675mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to

IS-14587:1998 with 1 mm laminate pressed on to top. Soft closing access flap within-build

power box are provided on work surface for wire management. The ERU top is made of 18

mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 1mm laminate

pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate

5 MR Reception Table board confirming to IS-14587:1998 with 1mm laminate pressed on to top. The understructure is Nos 1 75,000.00 75,000.00

made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge

banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-

laminated twin board of E1-P2 grade and approved shade edge banded with matching 2

mm thick PVC lipping. Drawer fronts made of 18mm thick MDF one side pre-laminate board

with 1mm laminate pressed on to top pedestal construction is BOX-BOX-FILE type Handles

are provided for ease of opening. Pedestals are provided with lock for security.Complete all

as per the direction of Engineer in Charge.

The workstation comprises a 1200mm x 600mm linear setup with a 25mm thick pre-

laminated particle board table top. The modular partition frame, constructed from

CRCA MS, is 60-65mm thick with a powder-coated finish, designed for electrical

and computer wiring. The frame structure includes vertical uprights, top and

bottom sections, and intermediate sections made of extruded Aluminum. The

partition panels consist of 9mm thick pre-laminated particle board finished with

laminate, fabric panels, and soft boards at different heights. Aluminum end trims

with powder coating complete the edges. The table top, also made of pre-

6 MR Workstation Nos 1 45,000.00 45,000.00

laminated particle board, is 600mm deep with exposed edges finished in 2mm x

25mm PVC hot pressed lipping. Heavy-duty MS brackets and cleats support the

table top, and an ABS wire manager is included. The 3-drawer pedestal features

18mm thick pre-laminated particle board, full-panel type drawer runners, cradle

filing arrangement, and stainless steel handles. A pull-out tray for the keyboard

(480mm wide) and a CPU trolley with adjustable height (125mm to 225mm) are

part of the setup. Additionally, a quarter-round frosted glass divider (10mm thick)

with polished edges and a foldable end leg panel complement the workstation.

Providing and placing in position officer table. Size 3660mmx 1200mmx 750mm.

Worktop shall be made from 25mm thick MDF one side prelaminate board with

0.4mm PVC membrane pressed on to top and having chamfered edge. Soft

closing dual access flap provided for access to power supply and data cables. The

Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of

E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with

matching 2 mm thick PVC lipping.

Conference Anodised aluminium alloy 63400 - WP profile is added at bottom edges for

room Table improving the aesthetics.The product has a knock-down construction. A wire raiser

made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60

microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for

standard 8 module Anchor Roma is provided. Beside each cutout, an additional

cutout with plate is provided for mounting Audio Visual Cables(eg. HDMI,VGA-

A,etc). The product must be UL Greenguard certified.Complete all as per the

direction of Engineer in Charge.

Providing and placing in position Centre table.The Glass shall be 10+/-0.3mm thick

Waiting black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing

Centre Table with understructure. It shall be a welded assembly made in SS202 grade having

dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table=

Providing Depth=60.0

Placing cm, height=35.1

in the position ofcm.Complete all assofa

three seaters long per has

for visitors. It features leatherite work while the upholstered seats are fitted on a

9 MR near canteen Nos 5 25,000.00 125,000.00

slatted base1.8m x 69cm x 69cm.

Providing and Placing in the position of three seaters long sofa has been designed

Waiting single for visitors. It features leatherite work while the upholstered seats are fitted on a

seater sofa slatted base1.8m x 69cm x 69cm.

Digitally signed by AMIT

18mm thick pre-laminated HDHMR board for durability and strength

Shelves made of 18 mm thickness and back made of 12 mm thickness

16 MR Pantry The Depth of lower cabinet will 500mm & Uper cabinet storage Depth will be 300mm Sqm 25 12,500.00 312,500.00

450 mm Depth , 2 tone laminate on shutter

Size- Design as per the engineer incharge

18mm thick pre-laminated HDHMR board for durability and strength

Shelves made of 18 mm thickness and back made of 12 mm thickness

16 MR Kitchen The Depth of lower cabinet will 500mm & Uper cabinet storage Depth will be 300mm Sqm 160 12,500.00 2,000,000.00

h , 2 tone laminate on shutter

Size- Design as per the engineer incharge

18mm thick pre-laminated HDHMR board for durability and strength

Shelves made of 18 mm thickness and back made of 12 mm thickness

17 MR Door storage cabinet with lock and key facility with sheves and Storage drawers SQM 320 11,500.00 3,680,000.00

upto 600 mm Depth , 2 tone laminate on shutter

Size- Design as per the engineer incharge

18mm thick pre-laminated HDHMR board for durability and strength

Full Height Shelves made of 18 mm thickness and back made of 12 mm thickness

17 MR storage Door storage cabinet with lock and key facility with sheves and filing drawers SQM 4 12,500.00 50,000.00

2400mm Ht. 450 mm Depth , 2 tone laminate on shutter

Size- Design as per the engineer incharge

Table :- Providing & Fixing of Cafe table of Size The Worktop shall be made of 25mm

W5000 x D600 Prelamparticle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm

x H750mm All the exposed edges are finished with 2mm thick PVC lipping machine pressed. Legs are

made of powdered coated steel 50mmx 50mm Section. Cross Member are in CRCA steel

and the Beam is made of MSof 1.5mm thickness in powder coated finish of 50 microns

thickness . The above furniture should be as per specification and sample approved by

18 MR client.Warranty 5 years . Nos 4 53,873.25 215,493.00

Chair Seat is made of Injection molded polypropylene. Seat is attached to the frame by the back

attachment and with two steel Pal-nuts . Backrest is also made of Injection molded

polypropylene. Attached to the frame with two metal clips. Contains a contoured handle

opening at the top for easy lifting and stacking.Chair Frame Construction - Welded

construction made primarily of 7/16" diameter steel wire (solid) bent to shape on a CNC

wire bender. A 7-gauge steel seat strap, ribbed for added strength, supports the front of

the seat and a 7/16" contoured steel rod joins the front legs for strength.

Frame Finish - Bright chrome plated finish with duplex (semi-bright) nickel, bright nickel

and chrome applied. Nickel provides corrosion resistance. Warranty 5 years .

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

HOSTELS & Residential

Schedule of Quantities: Signages and Artwork

S No Description Unit Qty Unit price DSR Non-DSR Amount

1 MAIN SIGNAGE

Providing and fixing of Acrylic signage made of 3mm Acrylic with textured wood finish pasted Each 5 5,000.00 25,000.00

/White milky acrylic 3mm laser cut pasted on top with proper names (Library) laser cut

acrylic letters in approved colour.Fixing provision using 3M VHP double sided tape as required.

Signage Size 36x18 inch

2 NAME SIGNAGE CHANGEABLE (All Floors)

Providing and fixing of Acrylic signage made of 3mm Acrylic with textured wood finish pasted

/White milky acrylic 3mm laser cut pasted on top with proper names/ Departments written

using plottercut vinyl or laser cut acrylic letters in approved colour.Inserting provision for

changing names .Fixing provision using 3M VHP double sided tape as required. Each 24 1,967.00 47,208.00

Signage Size 12x5 inch

3 FLOOR DIRECTORY

Providing and fixing of Acrylic signageboard of 5mm Acrylic with textured wood finish pasted

/White milky acrylic 3mm laser cut pasted on top with proper names

/Departments written using plottercut vinyl or laser cut acrylic letters in approved colour. Provision Each 5 15,000.00 75,000.00

of fixing screws/ Studs etc or as per the direction of the engineer.

4 FIRE EVACUATION MAP / SIGN.

Providing and fixing of Clear Acrylic sandwich frame of 3mm & 2mm acrylic with Evacuation Plan Each 5 2,673.00

Printed on photoluminescent media and inserted between the two frames. Should be fixed on 13,365.00

the wall using 4 Screw/ SS studs. Size 12 inch x 17 inch

5 FIRE ESCAPE EDGE-LIT SIGNAGE

Providing and fixing of Edge-Lit signage with battery backup. Made from acrylic sheet of 8 mm

thickness laser engraved, Transformer to be inbuilt. Maintenance free sealed nickel cadmium

battery included • 120V/277V AC Operation • Crystal clear acrylic face panel• Engraved letters

increase visibility • Anodized aluminum faceplate • Field applied chevron directional Each 5 3,289.00 16,445.00

indicators simplify installation • Long life, energy-saving LED lamps • Dual-voltage

120V/277V AC Operation • UL listed. To be installed at stairs entry. Size 310mm x 175mm

6 FIRE SAFETY SIGNAGE

Providing fabricating and fixing of signage 05 mm thick Acrylic / Sun board sheet at base with

photoluminescent film self adhesive & colored vinyl ( Red/Green) Plotter cut and pasted on

top. Both side / Single Side facing Complete including fixing on wall with screws and washers or

hanging on ceiling with GI chain/GI Bar complete as per technical specifications and directions of

a Photoluminescent, Fire Exit / Escape Sign - 18"x6" Each 3 617.00 1,851.00

b Photoluminescent, Floor Level - 18"x6" Each 3 617.00 1,851.00

c Photoluminescent, Fire Alarm Call Point - 10"x8" Each 3 535.00 1,605.00

Digitally signed by AMIT

d Photoluminescent, Fire do not use lift- 10"x8" Each 3 535.00 1,605.00

e Photoluminescent Signs, Fire Extinguishers - 10"x8" Each 5 535.00 2,675.00

7 Wall Painting Digital Art

Customised wall Painting with Moulding frame & Canva Digital print as mentioned by

team/Client with 4mm Mdf back & canva pasted on top of it with moulding 35mm Sqm 100 1000.00 100,000.00

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

HOSTELS & Residential

Schedule of Quantities: Signages and Artwork

S No Description Unit Qty Unit price DSR Non-DSR Amount

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with

manual Chisel and/ or by standard power driven percussion type or of approved make

including tapering of all edges, making square shoulders of cavities including cleaning

26.28.1 the exposed concrete surface and reinforcement with wire brushes etc. and SQ MTR 1255 311.95 391,497.25

disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge

Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free -

steel surface by using alkaline chemical rust remover of approvedmake with paint brush

and removing loose particles after 24 hours of its application with wire brush and

26.29.1 thoroughly washing with water and allowing it to dry, all complete as per direction of RMT 2850 6.65 18,952.50

Engineer-In-Charge.

Bars upto 12 mm diameter

26.29.2 Bars above 12 mm diameter RMT 2450 13.35 32,707.50

Rust Passivation: Two component, low solvent, zinc rich epoxy resin based

Anticorrosive Treatment of reinforcements in coats with time interval of minimum 4

hours between each coat of the approved makes. The application shall be done by

NDSR brush or spray as per Manufactureres recommendation, complete. The rates are SQ MTR 1150 450 517,500.00

inclusive of all materials, labor, machinery, equipment, tools, tackles etc. and disposal

of debris, all complete. Mode of measurement will be per sqmt of exposed area of

Corrosion Inhibitor- Coat of Concrete Penetrating Corrosion Inhibitor which works on

Bipolar Inhibition Mechanism of the approved makes on concrete surface to be

NDSR repaired by using brush or spray at dosage specified by the manufacturer. Mode of SQ MTR 1100 350.00 385,000.00 -

measurement will be per sqmt of exposed area of concrete.

Providing, mixing and applying bonding coat of approved adhesive on chipped portion

of RCC as per specifications and direction of Engineer-In-charge complete in all

respect.Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make

Centering and shuttering including strutting, propping etc. and removal of form work

for:- Columns, piers, abutments, pillars, posts and struts

Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved

make from factory/workshop to construction site including placing in position

5.22B.1 and binding all complete upto plinth level. Kg 1755 83.15 145,928.25

Thermo-Mechanically Treated bars of grade Fe-500D or more

Digitally signed by AMIT

Drilling suitable holes in reinforced or plain cement concrete with power driven drill

machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns

and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars

26.30.1 in position using epoxy resin anchor grout of approved make but excluding the cost of Holes 3764 121.95 459,019.80 -

reinforcement, all complete as per direction of Engineer-In-Charge. Upto and including

Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area

and along crack line including drilling of holes of required diametre (20mm to 30mm) up

to depth from 30mm to 80mm at required spacing and making the hole & crack dust

26.39 free by blowing compressed air, sealing the distance between injection nipple with Nos 250 202.7 50,675.00

adhesive chemical of approved make and allow it to cure complete as per direction of

Engineer-In-Charge.

Repair Micro concrete: Application of repair Micro-concrete of M40 grade for Making

up lost section of concrete for thickness more than 30mm, after the application of

NDSR bonding agents to ensure stability of the concrete, followed by curing with water for at Kg 55565 45.00 2,500,425.00 -

least 7 days. The rates are inclusive of all materials, labour, machinery, equipment,

Thixotropic Repair Mortar:

Repair with Dual shrinkage compensated, trowelable fibre reinforced thixotropic repair

mortar. Repairs to the deteriorated/damaged areas of RCC elements in the structure

shall be carried out by using powder Polymer Modified repair mortar. The polymer

modified mortar is applied when the epoxy bonding coat is still tacky. In one application

maximum 25 mm thickness shall be built. Subsequent layer shall be built with one bond

coat of Polymer modified cement slurry. The polymer modified repair mortar shall be

mixed, applied and cured.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to

seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal &

vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S.

clamps and M.S. staircase system in the scaffolding for working platform etc. and

maintaining it in a serviceable condition for the required duration as approved and

removing it there after .The scaffolding system shall be stiffened with bracings, runners,

connection with the building etc wherever required for inspection of work at required

locations with essential safety features for the workmen etc. complete as per directions

and approval of Engineerin- charge .The elevational area of the scaffolding shall be

measured for payment purpose .The payment will be made once irrespective of

duration of scaffolding.

Digitally signed by AMIT

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste

materials by mechanical means, including loading, transporting, unloading to approved

15.6 municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial Cum 100 219.35 21,935.00 -

lead, for all leads including all lifts involved.

Embeded Sacrificial galvanic Anode: Providing & fixing Galvanic Sacrificial anodes in

compliance with ASTM B 418 Type II in RCC elements after tying them to the existing

clean rebar with the specially attached wires to it in a grid fashion to achieve corrosion

potential more negative than rebar. The sacrificial anode shall have zinc mass of at least

100 grams encased in conductive mortar. The anodes shall be soaked in water for about

30 minutes before installation. Work to be executed complete as per manufacturer

specification and the project consultants.

Insertion of sustainable release Powrthrow caplets: Drill the hole of 25 mm diameter

NDSR and 30 mm depth in the RCC at 500 mm c/c in a zig-zag manner. Clean the hole by Nos 300 400.00 120,000.00 -

removing the dust & insert the Powrthrow caplet.

Dismantling of old plaster or skirting raking out joints and cleaning the surface for

15.56 plaster including disposal of rubbish to the dumping ground within 50 metres lead. SQ MTR 600 45.05 27,030.00 -

15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel

15.3 bars and disposal of unserviceable material within 50 metres lead as per direction of Cum 50 2928.10 146,405.00 -

Engineer - in- charge.

Providing and fixing double glazed hermetically sealed glazing in aluminium windows,

ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of

13.47.1 required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and SQ MTR 4200 162.35 681,870.00 -

including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer -

as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10

sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Providing and applying white cement based putty of average thickness 1 mm, of

13.8 approved brand and manufacturer, over the plastered wall surface toprepare the SQ MTR 2800 123.85 346,780.00

surface even and smooth complete.

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking

the material within 50 metres lead :100 mm dia pipe

Digitally signed by AMIT

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to

IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10

mm gap for thermal expansion, (i) Single socketed pipes.- 110 mm diameter

Modified estimated cost after using correction factor on DSR 2023

on account of GST @ 0.973

(Carried 11,359,502.78

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

Administrative Block

DISMANTLING WORK

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL

DSR (INR) NON-DSR (INR)

Dismantling tile work in floors and roofs laid in cement

mortar including stacking material within 50 metres lead.

15.23.2 For thickness of tiles above 10 mm and up to 25 mm SQM 1,120 73.40 82,208.00

Dismantling doors, windows and clerestory windows (steel

or wood) shutter including chowkhats, architrave,

holdfasts etc. complete and stacking within 50 metres

15.12.1 Of area 3 sq. metres and below EACH 20 367.20 7,344.00

Carriage of material by mechanical transport including

loading unloading and stacking

1.1.1 Lime, murrum, building rubbish

Demolishing brick work manually/ by mechanical means

including stacking of serviceable material and disposal of

unserviceable material within 50 metres lead as per

direction of Engineer-in-charge.

15.7.4 In cement mortar CUM 6.00 2,060.20 12,361.20

Dismantling manually/ by mechanical means including stacking of

5 15.43 serviceable material and disposal of unserviceable material within 50

metres lead as per direction of Engineer-in-charge :

TOTAL OF DISMANTLING 1,188,031.20

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

Administrative Block

S NO DESCRIPTION UNIT RATE QTY DSR-AMOUNT NON DSR-AMOUNT

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-

1 9.21 decorative type, core of block board construction with frame of 1st class hard wood and well

matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on

both faces of shutters:

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 2392.65 2.11 5,058.81

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss /

matt/ suede finish with high density protective surface layer and reverse side of adhesive

bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges

of flush door shutters (over all area of door shutter to be measured).

26.86 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer

of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice

husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated

with miter joints after applying PVC solvent cement and screwed with full body threaded star

headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of

2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of

elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of

being termite/borer proof, water/moisture proof and fire retardant and fixed in position with

M.S hold fast/lugs/SS dash

fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold

fast/lugs or SS dash fasteners shall be paid for separately).

Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and

width of profile shall be acceptable. Variation in profile dimensions on plus side shall be

acceptable but no extra payment on this account shall be made.

26.87 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60

(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat

husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum

density of 650 kg/ cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),

minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to

spread of flame of Class A category

with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be

laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt

adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with

necessary full body threaded star headed counter sunk S.S screws, all as per direction of

Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid

Providing and Fixing EMB 245 SS Mortise Lock Body SB/TB for door thickness 25-50 mm for

6 MR wooden doors of approved make and model all complete as per the direction of Engineer-in- Each 895.62 2.00 1,791.24

Providing and fixing stainless steel handles of grade 304 with necessary screws etc. of approved

make complete as per direction of Engineer-in-charge :

Providing and fixing Stainless steel sliding door bolts of grade 304 with nuts and screws etc.

complete as per direction of Engineer-in-charge.

Providing and fixing Stainless steel tower bolts of grade 304 with necessary screws etc. of

approved make complete as per direction of Engineer-in-charge.

Digitally signed by AMIT

Providing and fixing factory made uPVC white Providing and fixing factory made uPVC

glazed/wire mesh windows/

doors comprising of lead free uPVC multi-chambered frame, sash and

mullion/coupler (where ever required) extruded profiles having minimum

wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm

for Series R3 and R4 profiles conforming to EN: 12608 in any shape,

colour and design duly reinforced with galvanized mild steel section

made of required shape & size as per CPWD Specification, uPVC

extruded glazing beads, interlocks and lnline sash adaptor (where

ever required) of appropriate dimension, EPDM gasket, hardware, SS

304 grade fasteners of minimum 8 mm dia with countersunk head,

comprising of matching polyamide PA6 grade sleeve for fixing frame

to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic

10 9.147A caps and necessary stainless steel screws etc. Profile of frame, sash &

mullion (if required) shall be mitred cut and fusion welded/mechanically

jointed duly sealed at all corners, including drilling of holes for fixing

hardware and drainage of water etc. After fixing frame the gap between

frame and adjacent finished wall shall be filled with weather proof silicon

sealant over backer rod of approved size and quality, all complete as

per approved drawing conforming to CPWD specification & direction of

Engineer-in-Charge. Section of steel reinforcement and cross sections

of uPVC profiles to be as per design approved by Engineer-in-Charge.

Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit

with/ without high performance coatings as per design requirements and

conforming to IS: 3548 & IS: 16231 shall be paid separately.

Note:- Structural design proof checked from a Government

Engineering Institute, to be provided by the manufacturer for

Two track two panels sliding door with Aluminium channel

for roller track, wool pile, zinc alloy (zamak) powder coated handle on every panel along with

multi-point locking system,

9.147B.1.1 adjustable nylon rollers with SS 304 body. Sqm 8106.30 122.50 993,021.75

9.147.B1.1 Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm &

x (74 mm & above). (Height upto 2.5 metre).

11 9.7.7 providing and fixing float glass panes

9.7.7.2 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). Sqm 2600.45 122.50 318,555.13

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of

12 8.2 required size, approved shade, colour and texture laid over 20 mm thick base cement mortar

1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss

finish etc. complete at all levels.

8.2.2 Granite of any colour and shade

8.2.2.2 Area of Slab over 0.50sqm (Granite having basic rate not less than Rs. 2000 per sqm) sqm 5136.3 5.00 25,664.67

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including

machine polishing to edge to give high gloss finish etc. complete as per design approved by

Engineer-in-Charge.

14 8.4 Extra for fixing marble /granite stone over and above corresponding basic item, in facia and metre 568.55 2.343 1,332.11

drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen

platform, vanity counter and similar location in marble/ Granite/stone work, including

necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc.

Digitally signed by AMIT

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness

to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make,

16 11.38 in all colours shade,except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement sqm 1315.3 122.00 160,466.60

mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including

grouting the joints with white cement and matching pigments etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make, in all colours, shades except burgundy,

bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and

17 8.31. dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with sqm 1267.95 515.00 652,994.25

grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of

matching shade complete.

VITRIFIED FLOOR TILES

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved

make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse

18 11.41 sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white

cement and matching pigments etc., complete. The vitrified tiles shall be from the double/multi

charged range of tiles.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer),

with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all

19 11.46 colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1

cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the

joint with white cement & matching pigments etc. complete.Note: - The vitrified tiles shall be

from the double/multi charged range of tiles.

FALSE CEILING WORKS

Providing and fixing false ceiling at all height including providing and fixing of frame work made

of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x

1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed

to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of

cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9

mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm

thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at

450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel

with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

20 12.45 including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30

mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm

centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to

ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at

230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the

board with recommended jointing compound , jointing tapes , finishing with jointing compound

in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer's specification and also including the cost of making openings for

light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of the Engineer in Charge but excluding

the cost of painting with

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board

with BIS certification marks)

Digitally signed by AMIT

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium

silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level,

suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120

grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get

required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200

mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet,

1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600

mm and seconDSRy cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick

(Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size

600x600 mm, resting on periphery walls /partitions on a Perimeter wall

angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with

the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm

interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture

in the grid, including, cutting/ making opening“for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from

ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50

mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x

30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm

of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per

specifications, drawings and as directed by Engineer-in-Charge.

Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction

shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The

calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- sqm 2158.15 575.00 1,240,936.25

combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal

conductivity <0.043 w/mK.

Supply and installation of Aluminium Framed Glass Partition for Access and Cabin System for

minimal frame, room dividing solutions.Single glazed mullion free demountable glass partition

using Toughened/ Laminated glass in proprietary natural anodised/Black aluminium sections

ALT 50 of size 50mm x 30mm with Concealed sealing (No visible Gaskets/Seals) with acoustic

rating of Minimum 32 db with third party test certificate. The profile will have Carpet/tile

Groove at the Bottom on both sides for accomodating max. 8mm carpets. THe Glass to be fixed

22 MR with help of Proprietary Stability GRIPPER Clamp to have a stable system. It should consists of Sqm 4100.00 118.00 483,800.00

intermediate slim junction profiles for Glass to Glass vertical joints, 90 Degree L Junction and T

Junction profiles suitably to be used as per room configuration designs.No VISIBLE Clip Lines to

provide clutter free view at both side of section. The Glass to be Offset mounted towards outer

edge leading to minimum aluminium frame on one side. Optional Profile Bottom Seal pair for

additional accoustic. Glass thickness-10 (LSG).shall be included in the product.

Providing and Fixing FHHS 3100 (EN 1154) - Double cylinder Floor Spring with Top-Bottom

Patch,pivot and Bottom Patch Lock Maximum door weight 100 Kg. Maximum door width 1000

mm.Closing speed : 120°,Final closing speed : 15-0°. Hold Open (standard): 90° hold

23 MR open.Suitable for 10-12 mm glass Each 9858.00 23.00 226,734.00

Weight of floor spring approx : 6kg

5 Years Warranty against manufacturing defect with 5,00,000 cycles Tested approved make and

model all complete as per the direction of Engineer-in-charge.

Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film

to reproduce Sand-blasting effect on glass with customised designs, thickness of 2 mil (0.05mm)

without adhesive & 3mil (0.8)with adhesive having minimum tensile strength of 3.5 pound/inch

at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7

24 MR kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to Sqm 2250.00 88.00 198,000.00

15yrs (indoors) must be endorsed by 3M India Limited Architectural Market Department.

Contractors payment wouldn't be released until & unless he/she produces orginal warranty

certificate from the manufacturer.

Digitally signed by AMIT

Providing & supplying of Window Blinds as per the approved sample in required shade and style

consisting, of Roller Blinds comprising of optima screen Fabric comprising of 22% polyester, 78%

PVC, Fabric weight 460-480G weight per sq m, Thickness 0.67 mm, Yarn count 18-19/cm, having

fire resistance standard – NFPA 701-89 small testing ISO-5659-2 .The tear resistance should be

complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch for

quick,easy and safe installation,moulded plastic with steel spring support and inserted into the

tube end. It shall be driven by a ball chain pulley with ball chain and can be positioned at right

side or left hand side of the Shade. The Shade when lowering or raising, shall be automatically

locked in position upon release of the ball chain by means of a built in friction lock.Universal

clutch for left and right hand operation.Chain Gear Ratio of 1.75:1.The END PLUG shall be

25 MR molded of plastic witha steel location pin. The plug shall be inserted into the tube end. Sqm 2540.00 131.00 332,740.00

(Opposite to the Drive Unit) for ease of installation. TheSUPPORT BRACKETS shall be of coated

steel & provided with covers and used in right hand or left hand positions differentiated by the

acceptance of the of the rectangular drive unit support or the round idler plug pin.Can

beinstalled (a) On Face (b) Ceiling Mount (c) On Frame (d) in Recess. The Bracket should be

protruding outside maximum of80mm.The ROLLER TUBE shall be of extruded aluminum with

37mm internal diameter & skin thickness of 1mm and shall incorporate a key way integral with

the tube to accommodate the spline. The BOTTOM RAIL shall be a Flat Bottom made up of

powder coated steel. The BALLCHAIN shall be 2mm diameter cord with 4.5mm diameter acetal

balls moulded co-axially to it on 6mm pitch to form an endless ballchain.It is used for raising or

lowering action of the shades.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 1123.80 27.00 30,342.60

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half

28 13.4 12 mm cement plaster of mix :

Providing and applying white cement based putty of average thickness 1 mm, of approved

29 13.80 brand and manufacturer, over the plastered wall surface to prepare the surface even and sqm 156.05 1191.00 185,855.55

smooth complete.

13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

30 13.83 Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture,

including applying additional coats wherever required to achieve even shade and colour.

13.85Applying priming coats with primer of approved brand and manufacture,

having low VOC (Volatile Organic Compound ) content

With water thinnable cement primer on wall surface having

VOC content less than 50 grams/litre

Glass Partitioning: GLASS PARTITIONING:- Providing and fixing 12 mm thick frameless glass

Partition of approved brand and manufacture, including providing and fixing over aluminium

channels embedded in the floor and supported at the top as detailed. The Partition to be fitted

32 MR firmly to the true ceiling with necessary anchors / fastners. All the edges of the glass shall have SQM 4200.00 30.00 126,000.00

pencil nosing and machine polished. the joints in glass shall be filled with colourless silicon

sealent all complete as per Direction of Engineer-in-charge

Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up stanDSRd tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia

and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with

33 21.1 required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,

straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium

snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash

fasteners to be paid for separately) :

Digitally signed by AMIT

21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 530.9 369.46 196,146.31

Filling the gap in between aluminium frame, Upvc frame & adjacent RCC/ Brick/ Stone work by

34 21.8 providing weather silicon sealant over backer rod of approved quality as per architectural

drawings and direction of Engineer-in-charge complete.

21.8.1 Upto 5mm depth and 5 mm width metre 96.75 22.21 2,148.82

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand

35 21.18 and manufacture, including providing and fixing top & bottom pivot & spring type fixing sqm 5325.9 52.00 276,946.80

arrangement and making necessary holes etc. for fixing required door fittings, all complete as

per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by

applying cement slurry mixed with water proofing cement compound consisting of applying

a) First layer of slurry of cement @ 0.488 kg/sum mixed with water proofing cement compound

36 22.5 @ 0.253 kg/sum. This layer will be allowed to air cure for 4 hours.)b. Second layer of slurry of sqm 617.05 137.00 84,535.85

cement @ 0.242 kg/sum mixed with water proofing cement compound @ 0.126 kg/sum. This

layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.

(The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions

of pipes and masonry with polymer mixed slurry.)

Providing and laying in position cement concrete of specified grade excluding the cost of

37 4.1 centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived fromnatural sources : 8 graded stone

aggregate 40 mmnominal size derived from natural sources)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness)

including attached pilasters, columns, piers,

38 4.2 abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed

blocks, anchor blocks, plain window sills, fillets,

sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:

1:5:10 (1 cement : 5 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 10

aggregate 40 mm nominal size Recycled Aggregate

Providing, laying and compacting stone aggregate of specified sizes to WBM specification in

uniform thickness, hand picking and rolling with 3 wheeled road/ vibratory rollar 8-10 tonne

MR capacity in stages to proper grade and camber, applying and brooming requisite type of Cum 3380 175.00 591,500.00

screening/binding material to fill interstices of coarse aggregate, watering and compoacting to

required density

Providing and applying tack coat using hot straight run bitumen of

grade VG - 10, including heating the bitumen, spraying the bitumen with

mechanically operated spray unit fitted on bitumen boiler, cleaning and

preparing the existing road surface as per specifications

Providing and laying Dense Graded Bituminous Macadam using crushed

stone aggregates of specified grading, premixed with bituminous binder

and filler, transporting the hot mix to work site by tippers, laying with paver

42 16.54 finisher equiped with electronic sensor to the required grade, level and

alignment and rolling with smooth wheeled, vibratory and tandem rollers

as per specifications to achieve the desired compaction and density,

complete as per specificatons and directions of Engineer-in-Charge.

50 to 100 mm average compacted thickness with bitumen of

grade VG-30 @ 5% (percentage by weight of total mix) and

lime filler @ 2% (percentage by weight of Aggregate) prepared

in Batch Type Hot Mix Plant of 100-120 TPH capacity.

Digitally signed by AMIT

Providing and laying Bituminous concrete using crushed stone aggregates

of specified grading, premixed with bituminous binder and filler, transporting

the hot mix to work site by tippers, laying with paver finisher equiped with

43 16.57 electronic sensor to the required grade, level and alignment and rolling

with smooth wheeled, vibratory and tandem rollers to achieve the desired

compaction and density as per specification, complete and as per directions

of Engineer-in-Charge.

40/50 mm compacted thickness with bitumen of grade VG-30

@ 5.5% (percentage by weight of total mix) and lime filler @

3% (percentage by weight of Aggregate) prepared in Batch

Providing and Plant

layingofat100-120

or near TPH capacity.

ground level factory made kerb stone of

M-25 grade cement concrete in position to the required line, level and

curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand),

including making joints with or without grooves (thickness of joints except

44 16.69 at sharp curve shall not to more than 5 mm), including making drainage cum 10117.6 11.48 116,109.46

opening wherever required complete etc. as per direction of Engineerin-

charge (length of finished kerb edging shall be measured to calculate

volume for payment). (Precast C.C. kerb stone shall be approved by

Engineer-in-charge).

Painting road surface marking with adequate nos of coats to give uniform finish with ready

mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow

shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc.

16.48.1 New work (Two or more coats) Sqm 288.9 250.00 72,225.00

Modified estimated cost after using correction factor on DSR 2023

on account of GST @ 0.973

GRAND TOTAL (Carried Forward) 10,642,826.20

GRAND TOTAL (Carried Forward) 10,642,826.20

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

Administrative Block

BOQ ELECTRICAL AND SANITORY WORK

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT Total QTY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface /

1.1 recessed medium class PVC conduit, with modular switch, modular plate, suitable

GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper

conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point

(without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper

1.55 conductor single core cable in surface / recessed PVC conduit, and earthing the -

point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper

A.3 1.12 conductor single core cable in surface/ recessed medium class PVC conduit Metre 850 334.00 283,900.00

alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable

for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular

1.24 plate & switch box including connections but excluding modular plate etc. as -

1.24.4 3 pin 5/6 amp socket outlet Each 155 122.00 18,910.00

1.24.5 6 pin 15/16 amp socket outlet Each 104 197.00 20,488.00

Supplying and fixing modular blanking plate on the existing modular plate &

switch box excluding modular plate as required.

Supplying and fixing following size/module, GI box along with Modular base & cover

plate on existing modular metal boxes etc. as required.

1.27.6 12 Module Each 547.00 -

B SUBMAIN AND CONTROL WIRING -

Wiring for circuit/ submain wiring alongwith earth wire with the following

1.14 sizes of FR PVC insulated copper conductor, single core cable in surface/ -

recessed medium class PVC conduit

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 425 334.00 141,950.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 170 439.00 74,630.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 205 1005.00 206,025.00

Digitally signed by AMIT

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature

2.10 circuit breaker suitable for inductive load of following poles in the existing MCB -

C.2 DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing

2.13 MCB DB complete with connections, testing and commissioning etc. as required. -

Supplying and fixing following way, horizontal type three pole and neutral,

sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned

C.4 2.4 copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder -

painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator)

Supplying and fixing following rating, double pole, (single phase and neutral), 240

2.14 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 -

C.5 milliamperes in the existing MCB DB complete with connections, testing and

commissioning etc. as

Supply, Installation, Testing, and Commissioning of 400mm Sweep, BEE 5-Star Rated 98,000.00

Wall-Mounted Fan, with a copper-wound energy-efficient motor, 3-speed settings,

minimum 75 CMM air delivery, 90-degree oscillation, aerodynamically designed ABS

or metal blades, 1300-1500 RPM, maximum 55W power rating, Class B or higher

D1 MR insulation, thermal overload protection, safety grill with tilt adjustment, shockproof Each 28 3500.00

and corrosion-resistant body, wall-mounting bracket with necessary fixtures, and

control via pull cord or remote. The scope includes supply, installation, testing, and

commissioning with a minimum 1-year manufacturer’s warranty.

Supply, Installation, Testing and Commissioning of 300 mm dia Domestic Exhaust Fan 32,400.00

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

Administrative Block

BOQ PLUMBING AND SANITORY WORK

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT Total QTY RATE

2022 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH 213,000.00

WALL FLANGE SIG-CHR-41053 or equivalent)

Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH 153,000.00

2 MR ADJUSTABLE WITH WALL FLANGE 15mm SIG-CHR-41083 or equivalent) EACH 34 4,500.00

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983

17.10 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings -

3 and brackets, cutting and making good the walls wherever required :

17.10.2 Kitchen Sink without Drain Board

Providing and fixing P.V.C. waste pipe for sink including P.V.C. waste fittings

17.28 complete. -

17.28.2 Flexible pipe -

Cutting chases in brick masonry walls for following diameter sand cast

iron/centrifugally cast (spun) iron pipes and making good the same with cement

17.61 concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 12.5 mm -

nominal size) including necessary plaster and pointing in cement mortar 1:4 (1

cement : 4 coarse sand) :

18.76 Cutting holes upto 30x30 cm in walls including making good the same. -

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 1 416.80 416.80

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing

with matching surface after housing G.I. pipe etc.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded

fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement and testing of -

joints complete as per direction of Engineer in Charge.

External work - Exposed on wall -

18.7.4 32mm nominal outer dia pipes METRE 100 518.75 51,875.00

Digitally signed by AMIT

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded

fittings, i/c fixing the pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent cement and

the cost of cutting chases and making good the same including testing of joints -

complete as per direction of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc. -

18.8.2 20mm nominal outer dia pipes METRE 350 537.60 188,160.00

Providing and fixing C.P. brass long body bib cock of approved quality

10 conforming to IS standards and weighing not less than 690 gms.

18.51.1 15 mm nominal bore EACH 3 798.95 2,396.85

Providing, fixing, jointing and testing in position of ISI marked UV stabilized

UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for

rubber ring joints, including all neccessary specials and fittings (confirming to

IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC

connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings,

clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers

etc. in concealed / inside duct / under floor & basement ceiling / external work

etc. including chase cutting as required, excavation and back filling in all kind of

soils, suspended from floor under false ceiling or embedding the pipes laid under

11.0 floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size) including cost of

shuttering for proper completion of the work, breaking and making good the

walls and floors etc. after pipes have been duly laid and tested. The rubber ring

shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts,

washers etc on 50x50x5 mm slotted angle. The cost will include all support

arrangements. The work includes commissioning of all pipes lines as per -

drawings and specifications and as directed by engg-in-charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 60 536.00 32,160.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 105 416.00 43,680.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes

of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap

including reduces, enlarger, socket, couplers, bends, tees etc including fixing at -

12 MR wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/

floors/ slabs and making good the same with cement concrete 1:2:4 complete as

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel

13 MR grating complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 19 536.00 10,184.00

Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over 13,794.00

Digitally signed by AMIT

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and 19,019.00

15 MR flat round cover with screws and other required fitting complete as required. EACH 19 1,001.00

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983

16 17.10 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings -

and brackets, cutting and making good the walls wherever required :

a 17.10.2 Kitchen sink without drain board -

b 17.10.2.1 610x510 mm bowl depth 200 mm EACH 0 4940.80 -

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.

waste fittings complete.

a 17.28.2 Flexible pipe -

PVC water tank of 1000 ltr capacty shall be made out by of 4mm thick Complete 18,000.00

b MR EACH 4 4500.00

MR Providing and fixing urinal large size of approved make and quality including all EACH 10 5,000.00 50,000.00

acessories like angle valve, spreader, waste pipe etc complete as required.

17 Providing & fixing of white vitreous china pedestal type water closet(European

type) with seat and lid, 10 liter low level white viterous china flushing cistern

C.P.flush bend with fittings & C.I.brackets ,40mm flush bend, overflow

arrangment with specials of standard make and mosquito proof coupling of

approved municipala design complete including painting of fittings and brackets,

cutting and making good the wall and Floors wherever required:

17.2.1 W.C pan with ISI marked white solid plastic seat and lid EACH 20 3510 70,200.00

17.81 Providing & fixing wash basin with C.I. brackets, C.P brass pillar taps,32 mm EACH 20 3200

C.P. brass waste of standard pattern, including painting of fittings and

brackets,cutting and making good the walls wherever required: White Vitreous 64,000.00

China Wash basin size 630x450mm with a single 15 mm C.P.brass pillar taps.

17.31 Providing and fixing mirror of superior glass (of approved quality) complete with

6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and

washers complete.

Total of Plumbing & Sanitary Rs. 486,716.40 566,382.00

Modified estimated cost after using correction factor on

DSR 2023 on account of GST @ 0.973

GRAND TOTAL (Carried Forward) 1,039,957.06

GRAND TOTAL (Carried Forward) 1,039,957.06

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

Administrative Block

BOQ PLUMBING AND SANITORY WORK

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT Total QTY RATE

2022 DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

1 1.0 Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and per Hp 56.00 16,415.00 919,240.00

heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two

Supply, installation, testing and commissioning of following minimum capacity 4-way

2 2 flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic

washable media pre-filter, fan section with low noise fan/dynamically balanced blower,

2.5 Corded Remote Nos. 25 2,500.00 62,500.00

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" &

3 "T" Joints i.e. Refnet Joints/ Header with Insulation for refrigerant piping

5 Copper piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen

testing of following nominal sizes of soft/hard drawn copper refrigerant piping for

VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger

5 supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular

insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of

specified thickness as given below for Suction and Liquid lines, all accessories as per

specifications etc. as required :

6.4 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm thick insulation

9.5 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm thick insulation

12.7 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm thick insulation

15.86 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm thick insulation

19 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm thick insulation

22.2 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm thick insulation

28.58 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm thick insulation

6 Cable Wiring

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS

6.1 1.14 PVC insulated copper conductor, single core cable in surface/ recessed medium class

PVC conduit asc required.

Digitally signed by AMIT

7 Drain Piping

Supply, installation, testing and commissioning of PVC drain water with necessary

clamps, fittings

such as bends tees etc. and duly insulated.

MR 40 mm dia (9 mm thick insulation) Rm 148 374.00 55,352.00

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply

with rear access for cable alley and with segregated bus-bar chamber with tinned

aluminium bus bar and including supplying and fixing following switchgears, meters and

accessories, inter-connections, bonding to earth, powder coated painting and marking as

specified. Switch boards complete as per schematic diagram:or its equivalent as per the

requirement of site

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

MR the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 100 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross

section, size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec

a) 40 Amps, TPN, MCB+ ELCB -2 Nos.

b) 32 Amps, TPN, MCB + ELCB - 2nos Each 1 102,895.00 102,895.00

Panel Complete as above

Total of Plumbing & Sanitary Rs. 2,166,949.00 232,747.00

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

Administrative Block

BOQ WI-FI DATA AND NETWORKING WORK

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT Total QTY RATE

2023 DSR (INR) NON-DSR (INR)

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper

(DSR conductors for Connectivity of Hub to End Point.High Speed Gigabit METRE 320 57.00 18,240.00

1.53.1) Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installation , Testing and Comissioning of I/O port for CAT6 cable

MR termination Nos. 30 400.00 12,000.00

2 at Workt table end. Keystone Unshielded Outlet, 180DG C6, Blue

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

MR termination Nos. 30 400.00 12,000.00

at Work Table end Redantant . Keystone Unshielded Outlet, 180DG C6,

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

MR termination Nos. 30 400.00 12,000.00

4 at Rack Side. Keystone Unshielded Outlet, 180DG C6, Blue

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

MR termination Nos. 30 400.00 12,000.00

at Rack Side end Redantant . Keystone Unshielded Outlet, 180DG C6,

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7

MR feet) for information outlet (I/O) to end user device connectivity.High Nos. 30 400.00 12,000.00

Speed Gigabit 24AWG U/UTP Patch Cord Blue, LSZH, C6, 2M

Supply , Installation , Testing and Comissioning of CAT6 patch cord 2 Mtr

MR (7 feet) for information outlet (I/O) to Rack end device connectivity. (Rack Nos. 30 400.00 12,000.00

end), High Speed Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

Supply , Installation , Testing and Comissioning of CAT6 patch cord 2 Mtr

MR (7 feet) for information outlet (I/O) to end user Redantant device Nos. 30 400.00 12,000.00

connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH,

8 C6, 2M (Yellow)

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7

MR feet) for information outlet (I/O) to Rack End Redantant device Nos. 30 400.00 12,000.00

connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH,

9 C6, 2M (Yellow)

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled

MR Staggred Nos. 1 3,500.00 3,500.00

10 Jack Panel for CAT6 cable termination at rack end. Data Active

Digitally signed by AMIT

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled

MR Staggred Nos. 1 3,500.00 3,500.00

Jack Panel for CAT6 cable termination at rack end. Data Active Redandant

Wi-Fi standard, IEEE’s new 802.11ac Wave 2 specification, and meets

the growing requirements of wireless networks by delivering a better

MR user experience. The 1830 Series extends support to a new generation Nos. 3 68,820.00 206,460.00

of Wi-Fi clients, such as smartphones, tablets, and high-performance

laptops that have integrated 802.11ac Wave 1 or Wave 2 support.

Supply , Installtion , Testing and Comissioning of 24 port Loaded Jack Panel

13 for CAT6A cable termination at rack end. Data Active

UTP Components for VOICE -

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper

(DSR conductors for Connectivity of Hub room to End Point.High Speed Gigabit RM 370 57.00 21,090.00

1.53.1) Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

MR termination Nos. 30 400.00 12,000.00

15 at Work table end. Keystone Unshielded Outlet, 180DG C6, (Ivory)

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

MR termination Nos. 30 400.00 12,000.00

16 at Rack end. Keystone Unshielded Outlet, 180DG C6, (Ivory)

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

MR termination Nos. 30 400.00 12,000.00

at Rack End. Keystone Unshielded Outlet, 180DG C6, For Voice Active Riser

17 Cable (Ivory)

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled

MR Staggred Nos. 1 3,500.00 3,500.00

18 Jack Panel for CAT6 cable termination at rack end. Voice Active

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled

MR Staggred Nos. 1 3,500.00 3,500.00

Jack Panel for CAT6 cable termination at rack end. Voice Active --- Riser

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7

MR feet) for information outlet (I/O) to end user device connectivity. (Rack Nos. 30 400.00 12,000.00

end), High Speed Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

MR SITC of 18U Rack Each 1 20,000.00 20,000.00

Digitally signed by AMIT

SITC of Ultra HD LED Multi-Touch Display with 4K resolution (3840x2160),

500 cd/m² brightness, and 4000:1 contrast ratio offers 20-point multi-

touch with object recognition (finger, stylus, palm). It includes 4 HDMI

ports, 1 DisplayPort, 2 USB 2.0 ports, 2 Ethernet (RJ-45) ports, Wi-Fi, and

MR RS-232 connectivity. Built-in 18W x 2 speakers provide clear audio, and Nos. 5 285,000.00 1,425,000.00

power consumption is 700W. The display measures 2256 mm x 1361 mm x

105 mm and weighs 130 kg. It comes with a power cable, stylus, remote

22 control, and wall mount kit.

MR Providing, supply and installation stand for Intractive screen on wall No.s 5 5,000.00 25,000.00

(Ceiling speakers)Supply, Installation, testing and commissioning of 6.5"

two-way coaxial thin edge ceiling loudspeaker, 100V transformer power

taps : 24,12,6, watts, Conical dispersion : 145° or more, impedance :

MR 8, low impedance RMS continous power : 30watts, frequency range : Nos. 6 12,500.00 75,000.00

50 Hz - 20 kHz or better, frequency response : 60Hz - 20KHz or better

etc complete required as per specifications.

(Amplifier)Supply, Installation, testing and commissioning of quad channel

Amplifier, 4 X 120watt or more, THD+N (@ 1 kHz) : < 0.3%,

Technology : Class-D, Common mode rejection ratio : 70dB or better,

MR Temperature controlled FAN, Switching mode power supply, should have Nos. 1 75,000.00 75,000.00

Protection features like : DC Short circuit & Over heating & Over load &

Signal limiting etc, Built-in high pass filter and gain adjustment option

etc complete required as per specifications.

(Speaker Cables)Supply, installation, testing and commissioning of of

ATC copper Conductor, Insulated Cores,PVC Sheathed Speaker Cables .

Supply & Installation Testing & Commissioning of 48 PORT managed

27 MR Network Switch

TOTAL OF WI-FI DATA & NETWORKING

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

Administrative Block

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT Total QTY RATE

2022 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing & Commissioning of 5MP IR IP H.265 Vandal 168,000.00

Proof Dome camera with 2.8 to 12mm Motorized Lens,Smart IR, up to

30M IR distance,Up to 120 dB WDR (Wide Dynamic Range),3D DNR (Digital

1 MR Noise Reduction),H.265+, H.265, H.264, MJPEG,Corridor mode, Triple Nos 28 6,000.00

streams,3-Axis, IP67, IK10 Vandal Resistant,Colour: 0.005Lux (F1.4, AGC ON), 0

Lux with IR,Video Compression H.265+, H.265, H.264, MJPEG,

Supply, Installation, Testing and Commissioning of 16Ch Embedded 82,500.00

2 MR Network Video Recorder with 4 Sata Supports 1 × Nos 3 27,500.00

RJ45 1000M ,4K Cameras, HDMI, VGA, RAID, Redundant power

MR SITC of SSD Hard Disk Drive 6TB, 24/7 surveillance category Only Nos 20,000.00 60,000.00

complete etc as required.etc.all complete.

Supply, Installation, Testing & Commissioning of 32" Flat Screen HD led 90,000.00

(24X7) with Interfaces include HDMI, DVI, D-sub, Component and

4 MR Composite input as well as RS-232C and RJ45 for extensive connectivity, Nos 3 30,000.00

remote control and wall mount unit / floor stand complete with making

connections etc complete as reqd.

5 MR SITC of HDMI cables 10 meters M2M etc all compelte. Nos 3 6,200.00 18,600.00

6 MR Supply , Installtion , Testing and Comissioning of sheilded twisted pair CAT 6

cable(STP) complete etc as required 4 pair

TOTAL OF CCTV AMOUNT - 440,190.00

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

Administrative Block

BOQ LIGHTING WORK

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT Total QTY RATE

2022 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of Recessed luminaire with

LED (Light Emitting Diode), system power: 28 W, luminous flux of 2800 lm,

colour temperature of 6000 K, Neutral white, 230 V constant current driver,

70% of luminous flux after 50,000 operating hours, energy-efficient LEDs, CRI

> 80, CRI > 80, THD<5%, P.F>0.95, SDCM 3, direct light emission, Luminaire

housing in Aluminium Extrution, polyester white powder coat applied over a 5-

stage pre-treatment, Opal diffuser for glare-free uniform light, integral

electronic control gear,

Supply, Installation, Testing and Commissioing of Recessed downlightwith

HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system

power: 12 W, Luminous flux of luminaire 1320 lm, 110 LM/W system efficacy,

Colour temperature of 4000 K, Neutral white, CRI > 80, 230V constant current

driver, 70% of luminous flux after 50,000 operating hours; energy-efficient

LEDs, direct light emission, housing in die-cast aluminium, Polyester powder

white coloured coat applied over a 5-stage pre-treatment trim,

prismatic diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN

LOW SMOKE) wiring, Electronic control gear,

Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm

4 MR Supply, Installation, Testing and Commissioning of 10W Mirror Light. Nos 13 450 5,850.00

Supply, Installation, Testing and Commissioning of 6 W wall light complete as

TOTAL LIGHTING WORK AMOUNT - 850,920.00

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

Administrative Block

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT Total QTY RATE

2022 DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of intelligent Pcs

1 17.2.4 analog addressable photothermal detector complete with 15 2,858.00 42,870.00

mounting base complete as required.

Supplying, installation, testing & commissioning of Pcs

2 addressable manual call point complete as required.

Supplying, installation, testing & commissioning of Pcs

addressable horn cum strobe complete as required.

Supplying, installation, testing & commissioning of fault Pcs

isolator complete with base as required.

Supplying, installation, testing & commissioning of response Pcs

indicator on surface/recessed MS Box having two LED,

metallic cover complete with all connections etc as required.

CABLES & ACCESSORIES FOR FAS : -

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, RM

600/1000V rated with annealed copper conductor having

4 XLPE insulation, steel wire armouring & FRLS outer sheath

complete as required.

TOTAL FIRE ADDRESSAL System AMOUNT 125,487.00 -

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

Administrative Block

FURNITURE DETAILS

TOTAL AMOUNT TOTAL AMOUNT

TOTAL AMOUNT TOTAL AMOUNT

Reference Image

S No DRS NO. Item Details Item Description Unit Qty Rate

DSR (INR) NON-DSR

Providing and placing in position mid back chair.The seat is made up of 1.2± 0.1cm thk. Hot pressed

plywood. The back is made up of injection moulded glass filled nylon & upholstered using net fabric

with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with

density =55+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has

an up=Down adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an

Mid back chair integrated layer of thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon with

for work station textured top. It shall have Front pivot synchro mechanism with following features. 360 degree revolving

, conference & type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock

visitors feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled

polyurathene foam & covered with polyester fabric. The height of lumber pad can be adjusted through

two projecting knobs provided on the rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5

cm in height. The must be greenguard certified. the work shall be carried out as per guidance and

instructions recieved from Engineer Incharge. It shall be SCS IAQ certified for Indoor Air

Quality.Complete all as per the direction of Engineer in Charge.

Providing and placing in position high back chair.The seat is made up of 1.2± 0.1cm thk. Hot pressed

plywood. The back is made up of injection moulded glass filled nylon & upholstered using net fabric

with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with

density =55+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has

an up=Down adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an

integrated layer of thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon with

High back chair

textured top. It shall have Front pivot synchro mechanism with following features. 360 degree revolving

2 MR for All cabin & Nos 3 12,500.00 37,500.00

type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock

feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled

polyurathene foam & covered with polyester fabric. The height of lumber pad can be adjusted through

two projecting knobs provided on the rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5

cm in height. The must be greenguard certified. the work shall be carried out as per guidance and

instructions recieved from Engineer Incharge. This shall come along a headrest from same family. It

shall be SCS IAQ certified for Indoor Air Quality.Complete all as per the direction of Engineer in Charge.

Providing and placing in position Study chair.The seat is made up of 1.2± 0.1cm thk. Hot pressed

Study seminar plywood. Chair Size:- 55cm(w) × 50cm (D). The lumber support consists mouled polyurathene foam &

chair covered with PU leather fabric.. It shall be SCS IAQ certified for Indoor Air Quality.Complete all as per

the direction of Engineer in Charge.

The workstation comprises a 1200mm x 600mm linear setup with a 25mm thick pre-laminated particle

board table top. The modular partition frame, constructed from CRCA MS, is 60-65mm thick with a

powder-coated finish, designed for electrical and computer wiring. The frame structure includes

4 MR Workstation vertical uprights, top and bottom sections, and intermediate sections made of extruded Aluminum. The Nos 6 45,000.00 270,000.00

partition panels consist of 9mm thick pre-laminated particle board finished with laminate, fabric panels,

and soft boards at different heights. Aluminum end trims with powder coating complete the edges. The

table top, also made of pre-laminated particle board, is 600mm deep with exposed edges finished in

2mm x 25mm PVC hot pressed lipping. Heavy-duty MS brackets and cleats support the table top, and

an ABS wire manager is included. The 3-drawer pedestal features 18mm thick pre-laminated particle

board, full-panel type drawer runners, cradle filing arrangement, and stainless steel handles. A pull-out

tray for the keyboard (480mm wide) and a CPU trolley with adjustable height (125mm to 225mm) are

part of the setup. Additionally, a quarter-round frosted glass divider (10mm thick) with polished edges

and a foldable end leg panel complement the workstation.

Digitally signed by AMIT

Providing and Placing in the position of three seaters long sofa has been designed for visitors. It

features leatherite work while the upholstered seats are fitted on a slatted base1.8m x 69cm x 69cm.

Waiting 3 seater

Providing and Placing in the position of three seaters long sofa has been designed for visitors. It

features leatherite work while the upholstered seats are fitted on a slatted base1.8m x 69cm x 69cm.

18mm thick pre-laminated HDHMR board for durability and strength Shelves made of 18 mm thickness

and back made of 12 mm thickness The Depth of lower cabinet will 500mm & Uper cabinet storage

Depth will be 300mm 450 mm Depth , 2 tone laminate on shutter Size- Design as per the engineer

18mm thick pre-laminated HDHMR board for durability and strength

Full Height Shelves made of 18 mm thickness and back made of 12 mm thickness

17 MR storage Door storage cabinet with lock and key facility with sheves and filing drawers SQM 35 12,500.00 437,500.00

2400mm Ht. 450 mm Depth , 2 tone laminate on shutter

Size- Design as per the engineer incharge

Providing & Fixing of Cafe table & Dinning area of Size The Worktop shall be made of 25mm

Prelamparticle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the

exposed edges are finished with 2mm thick PVC lipping machine pressed. Legs are made of powdered

coated steel 50mmx 50mm Section. Cross Member are in CRCA steel and the Beam is made of MSof

Table :- W2400 1.5mm thickness in powder coated finish of 50 microns thickness . The above furniture should be as per

18 MR x D600 x specification and sample approved by client.Warranty 5 years . Nos 6 30,000.00 180,000.00

Providing & Fixing of smart rooms of Size The Worktop shall be made of 25mm Prelamparticle Board of

Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished

with 2mm thick PVC lipping machine pressed. Legs are made of powdered coated steel 50mmx 50mm

Section. Cross Member are in CRCA steel and the Beam is made of MSof 1.5mm thickness in powder

Table :- W1800 coated finish of 50 microns thickness . The above furniture should be as per specification and sample

18 MR x D600 x approved by client.Warranty 5 years . Nos 30 25,000.00 750,000.00

Seat is made of Injection molded polypropylene. Seat is attached to the frame by the back attachment

and with two steel Pal-nuts . Backrest is also made of Injection molded polypropylene. Attached to the

frame with two metal clips. Contains a contoured handle opening at the top for easy lifting and

stacking.Chair Frame Construction - Welded construction made primarily of 7/16" diameter steel wire

(solid) bent to shape on a CNC wire bender. A 7-gauge steel seat strap, ribbed for added strength,

supports the front of the seat and a 7/16" contoured steel rod joins the front legs for strength.

19 MR Chair Frame Finish - Bright chrome plated finish with duplex (semi-bright) nickel, bright nickel and chrome Nos 16 6,784.00 108,544.00

applied. Nickel provides corrosion resistance. Warranty 5 years .

Digitally signed by AMIT

P/S Modular Workstation of sizes as specified below with Desk Based System of Height 1050/1200

mm. The Legs are made of 50mm x 50mm Sections of Steel duly powder coated. The Understructure

has CRCA Steel Powder coated Raceway with seperate . Raceway is trapizium shaped ,110mm Height

and 80-170mm Wide and runs along the entire Length of the Worktop. The slots for switches and

Sockets are provided on Raceway cover as pe the use requirement. The raceway cover is also CRCA

Steel Powder coated. Steel Powder coated Cross Beams are running under each Worktop. Cross Beam

has Dimension 50mm Ht x 25mm W . The workstations have 18mm MDF Fabric/MGP Screen to the

worktop. The height of Privacy Panel is 300mm above worktop. All steel parts shall be pretreated for

seven stage anti-corrosion treatment followed by epoxy powder coating. The thickness of the powder

coating for all the steel and aluminium parts shall be minimum 45microns. The worktop shall be made

of 25mm thick Prelaminated Particleboard. The Worktops should have metal inserts on underside for

modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling .

All exposed/unexposed edges shall be finished with hot melt PVC edge banding of 2mm thickness on

WORKSTATIONS working edge and 0.8mm on non working edges. Each workstation shall be provided with a wire

:- manager cutout of 65-70mm diameter .Worktops shall be provided with necessary prefixed M6 metallic

W900XD600X12 inserts for fixing the brackets to the worktops for metal to metal coupling for complete modularity. .

00MM Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , BIS and BIFMA Complaint member , BIFMA

GOLD , Green Guard product specific certificate issued by UL Environment . Warranty 5 years ."

Stainless steel frame with PU foam seat and back ,PVC upholstery

& 12 mm plywood in the back & powder-coated mild steel frame, ensuring durability and resistance to

Chair Dinning corrosion. The seat and backrest are made of high-density molded PVC, providing structural strength

Area and ease of maintenance. The integrated PVC armrests offer support, and the cantilever base with an

H 70cmx W anti-skid design ensures stability. The chair is finished in black and is designed for a weight capacity of

Digitally signed by AMIT

RENNOVATION OF NATIONAL INSTITUTE OF PUBLIC COOPERATION AND CHILD DEVELOPMENT

Administrative Block

Schedule of Quantities: Signages and Artwork

S No Description Unit Qty DSR

Unit price Non-DSR Amount

1 MAIN SIGNAGE

Providing and fixing of Acrylic signage made of 3mm Acrylic with textured wood finish pasted

/White milky acrylic 3mm laser cut pasted on top with proper names (Library) laser cut

acrylic letters in approved colour.Fixing provision using 3M VHP double sided tape as required. Each 2 5,000.00 10,000.00

Signage Size 36x18 inch

2 NAME SIGNAGE CHANGEABLE (All Floors)

Providing and fixing of Acrylic signage made of 3mm Acrylic with textured wood finish pasted

/White milky acrylic 3mm laser cut pasted on top with proper names/ Departments written

using plottercut vinyl or laser cut acrylic letters in approved colour.Inserting provision for Each 13 1,967.00 25,571.00

changing names .Fixing provision using 3M VHP double sided tape as required.

Signage Size 12x5 inch

3 FLOOR DIRECTORY -

Providing and fixing of Acrylic signageboard of 5mm Acrylic with textured wood finish pasted

/White milky acrylic 3mm laser cut pasted on top with proper names

/Departments written using plottercut vinyl or laser cut acrylic letters in approved colour. Provision

of fixing screws/ Studs etc or as per the direction of the engineer. Each 2 15,000.00 30,000.00

4 FIRE EVACUATION MAP / SIGN. -

Providing and fixing of Clear Acrylic sandwich frame of 3mm & 2mm acrylic with Evacuation Plan Each 4

Printed on photoluminescent media and inserted between the two frames. Should be fixed on

the wall using 4 Screw/ SS studs. Size 12 inch x 17 inch

5 FIRE ESCAPE EDGE-LIT SIGNAGE -

Providing and fixing of Edge-Lit signage with battery backup. Made from acrylic sheet of 8 mm

thickness laser engraved, Transformer to be inbuilt. Maintenance free sealed nickel cadmium

battery included • 120V/277V AC Operation • Crystal clear acrylic face panel• Engraved letters

increase visibility • Anodized aluminum faceplate • Field applied chevron directional

indicators simplify installation • Long life, energy-saving LED lamps • Dual-voltage Each 2 3,289.00 6,578.00

120V/277V AC Operation • UL listed. To be installed at stairs entry. Size 310mm x 175mm

6 FIRE SAFETY SIGNAGE -

Providing fabricating and fixing of signage 05 mm thick Acrylic / Sun board sheet at base with

photoluminescent film self adhesive & colored vinyl ( Red/Green) Plotter cut and pasted on

top. Both side / Single Side facing Complete including fixing on wall with screws and washers or

hanging on ceiling with GI chain/GI Bar complete as per technical specifications and directions of

a Photoluminescent, Fire Exit / Escape Sign - 18"x6" Each 4 617.00 2,468.00

b Photoluminescent, Floor Level - 18"x6" Each 4 617.00 2,468.00

Digitally signed by AMIT

c Photoluminescent, Fire Alarm Call Point - 10"x8" Each 4 535.00 2,140.00

d Photoluminescent, Fire do not use lift- 10"x8" Each 4 535.00 2,140.00

e Photoluminescent Signs, Fire Extinguishers - 10"x8" Each 8 535.00 4,280.00

8 Wall Painting Digital Art

Customised wall Painting with Moulding frame & Canva Digital print as mentioned by

team/Client with 4mm Mdf back & canva pasted on top of it with moulding 35mm Sqm 35 1,000.00 35,000.00

Digitally signed by AMIT