REPLACEMENT OF DAMAGED CONCERTINA COIL AT BOUNDARY WALL IN CGRA AND DHQ7 PARADIP AND PROVN OF CHEQUERED TILES IN FRONT OF SHOPPING COMPLEX BUILDING NO P42 AT CGRA PARADIP

Amount

S&F in repairs of CONSEC ZAL Super punch barb tape (SRPBT) Aluminium base helix coil with and include necessary GI fixing clips for securing complete all as specified and as directed with following specification:- (i) Dia of coil(unstreched-600 mm (ii)No of circle-51 turns per coil(iii) weight of each coil with hessian pack-8.5kg.(iv) Coverage per coil-6 to 8 RM (v) Central core wire:-made from 2.6 mm dia GI-H.T.S.S wireas per IS -4454 galvanised as per IS 2629.(vi) Razor Punched tape is CONSEC-ZAL steel comprising of AL base with Zinc alloy @150 gm/m2 conforming to ASTM-729/A-729M with additional primer treatment of Epoxy/Polyurethane & final paint top coat of Caulifieid green shade(BSL 139) by Hot Dipping process. The item also includings supply of 3 Nos of Horizontal ZAL runner wire for fixing of concertina coil including taking down the old unserviceable concertina coil complete all as specified and directed. Note :Only Net weight of coil incorporated at site shall be considered for measurement.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F mild steel work as in angle iron ,flat iron including bent to shape welding etc as directed ,drilling ,bolting or riveting, notching for wire etc confirming to Fe-410- W Grade E -250 quality-A etc complete all as specified and directed. (Note:Angle iron horns shall not be cut for barbed wire/concertina coil but additional flat iron made to shape as directed be welded to angle iron for holding the barbed wire complete all as specified and directed.

M&L for preparation of new or previously untreated surface of steel or steel based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted surface of steel or steel based materials of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level complete all as specified and directed.

M&L for PCC 1:2:4 Type B1 20 mm aggregate for fixing angle iron in coping of boundary wall lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar etc complete all as specified and directed.

M & L Brick work with fly ash bricks modular size, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6 ) complete all as specified and directed.

M & L for rendering 15mm thick cement plaster in CM (1:4) on fair faces brick or concrete surfaces using Liquid water proofing compound of wall including finished even and smooth without using extra cement complete all as specified and directed. (Note: WPC Shall be paid and meassured separately)

Supply only Liquid water proofing compound (Make: Pidillite/ Fosroc) complete all as specified and directed.

Material & Labour for preparation of new plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm finished even and smooth complete all as specified and directed.

Material & Labour for preparation of old plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm finished even and smooth complete all as specified and directed.

M & L for taking down existing concertina coil and refixing of existing CONSEC ZAL Super punch barb tape (SRPBT) Aluminium base helix coil with and include necessary GI fixing clips for securing for fixing of angle iron posts complete all as specified and directed.

Material & Labour for providing and fixing stainless steel framed work (Grade 304) for ladders ,railing made of hollow tubes,channels, plates etc. polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, with suitable arrangement complete all as specified and directed.

Surface excavation n exc 30 cm deep & averaging 15 cm deep & getting out in soft/loose soil complete all as specified and directed.

M & L Hardcore of broken stones or boulders of gauge n.exc 63mm deposited,spread & levelled in layersn exc. 15cm thick, watered & rammed to a true surfaces complete all as specified and directed.

Returning, filling in, including spreading, levelling , watering and well ramming in layers not exc 25 cm in loose /soft soil complete all as specified and directed.

Removal excavated materials n exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M & L for 100 mm thick PCC (1:3:6) type C-1 ,using 20 mm graded stone aggregate as in sub base of floor (for Chequered concrete Tiles) complete all as specified and directed.

M&L screed bed 20 mm thick for laying floor finishes in CM (1:4) complete all as specified and directed.

M&L for Chequered cement concrete tiles (30cmx30cmx25mm) thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and directed.

M & L for applying three coats of whitewash on new plastered surface of wall complete all as specified and directed.

SWAIN ENGINEARING

PRADIPTA KUMAR PANI

RANA ENTERPRISES

PABITRA MOHAN PARIDA