Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.2 LAccepted-AOC 1 218 1C SADAR BAZAR DELHI CANTT 110010 | NEW DELHI | DELHI | 110010 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹39.5 L+₹1.3 L (3.51%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹41.5 L+₹3.4 L (8.81%)Rejected-Finance A 47D RAM DUTT ENCLAVE UTTAM NAGAR NEW DELHI 110059 | WEST | DELHI | 110059 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹42.9 L+₹4.8 L (12.5%)Rejected-Finance PLOT NO 17 GF PRATAP NAGAR NEW DELHI 110064 | WEST | DELHI | 110064 | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹43.8 L+₹5.6 L (14.8%)Rejected-Finance | L5 | Rejected-Finance Being other than lowest |
Tender Value
₹41.8 L
EMD Value
₹83,620
Closing Date
20 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
SPL REPAIR TO BLDG NO T-22 AND ATT TOILET /BATHROOM OF DELHI AREA PROVOST UNIT UNDER GE (EAST) DELHI CANTT-10
2023_MES_634248_1
GE/DE-92/2023-24
Open Tender
Civil Works
Item Rate
120 days
GE (EAST) DELHI CANTT-10
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹83,620
Yes
8 Feb 2024
23 Dec 2023
22 Jan 2024
23 Dec 2023
20 Jan 2024
6 Jan 2024
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each and removing to store complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each and removing to store complete all as specified and as directed.
S & F Aluminium alloy powder coated windows including aluminum powder coated frames three track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 kg/RM double revated and 0.55 Kg for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.
S & F Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mmx2.1mm, shutter top section 47.62mm x 44.45mmx1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 kg/RM) incl shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring/door closer heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete.
S & F aluminium alloy powder coated glazed or skelton shutter including frame channel of section ( door frame single groove 85mmx45 mm x 1.25mm thick, shutter top section, bottom section, middle section and vertical section 65 mm x 45 mm x 1.25 mm thick and glazing clips weighing not less than 0.097 Kg/RM ) including shutter fixed to openable frame and channel as directed and as per IS specifications including S & F stainless steel wire cloth as required handles, tower bolt, door closer, locking arrangement Godrej, rubber gasket and door stopper complete.
S&F Aluminium alloy powder coated standard hollow section for ventilotors as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and as directed.
S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S & F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front and back Face (wooden finish pattern), supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.
S & F 25mm dia Stainless Steel heavy duty hollow Curtain Rod as per required length at site over Door/Window/Ventilator including taking down old UNSV curtain rod with bracket and finials in any position and height complete all as specified and as directed.
S & F heavy duty designer/fancy type Stainless Steel curtain rod brackets fixing to 25mm dia curtain rod , type and pattern as approved by Engr-in-Charge or GE fixed with rawl plug and screws to wall or in any position complete all as specified and directed.
S & F heavy duty designer type Stainless Steel curtain rod finials fixing to 25mm dia curtain rod , type and pattern as approved by Engr-in-Charge or GE complete all as specified and directed.
S & F in reapir Designer type high quality fancy type looking mirror of size (8 - 10mm thick) as approved by GE fixed to wall with stainless studs, screws , brackets and washers etc complete all as specified and as directed.
M & L for Mild steel rolled sections Fe-410-W (Gde-E-250) quality B as in Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc complete including dismantling of existing wrought iron complete all as specified and as directed.
S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete including dismantling of existing wrought iron complete all as specified and as directed.
M & L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.
S & F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing AC sheet corrugated or semi corrugated as in roof coverings complete all as specified and as directed.
S & F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing AC sheet corrugated, semi corrugated or plain as in roof coverings complete.
M & L 4mm thick desginer ceiling board ( Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instruction, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33 mm thick galvanized steel sheet & size T-24x32 mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 2 mm dia fixed rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runner at 600 mm c/c to from 600 x 600 mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19 x19 mm of white colour all as per instructionand including dismantling of walls and celing existing false ceiling with frame complete all as specified and directed.
M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.
Taking down cement or cement lime plaster , any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and fair in any position incl scafolding etc, complete all as specified and as directed.
M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and fair in any position incl scafolding etc, complete all as specified.
M & L for Preparation of new/Old plastered internal surfaces of walls/ceilings and applying 2mm thick layer of Birla White/J K White wall care putty, again sand papering to make surfaces smooth and applying Two coats of Oil Bound Distemper over a coat of wall primer, complete all as specified and as directed.
M & L for Preparation of new/Old plastered external surfaces of walls upto 4 storied buildings and applying 2mm thick layer of Birla White/J K White wall care putty, again sand papering to make surfaces smooth and applyingg Two coats of weather proofing exterior acrylic emulsion paint make premium quality on wall surfaces over a coat of exterior wall primer, complete all as specified and as directed.
M & L 20 mm thick granite (Z black colour) of any type work table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms and like in over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding after dismantling of existing granite complete all as specified and as directed .
M & L Vitrified coloured ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm tile not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15 mm thick avg screed bed in CM 1:6 and including dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.
M & L Vitrified ceramic tiles 8-10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including cement screed 15mm thick in CM (1:6) after dismantling of existing floor tiles, stone slab of any description complete all as specified and as directed.
M & L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 and after dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.
M & L for glazed coloured ceramic tiles in vertical surface 300x600x7 mm thick (with pattern and border work as required at site) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick rendering in CM 1:4 after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
S & F for PVC hollow wall panelling 7 to 8 mm thick wood grain teak finished prelaminated inclusive of fixing to wall incl moulding end caps fixed with PVC sleeves and screws as required at site including taking down existing panelling of any type complete all as specified and as directed.
S & F framed work such as in door frame, door shuters / gate of angel or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified.
S & F Mild steel, plain, black sheet 1.60mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.
S & F 300mm long Mild steel sliding door bolt with haps, stapple ( bolt type ) and fixing clips of sheet, cast of extraded sections and fixing bolts and sliding bolts of extraded sections complete.
S & F 125mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed.
S & F 100mm size stainless steel butt hinges to PVC frames with reqd nos of screws complete all as specified and as directed.
S & F Aluminum Anodised 150mm size barrel tower bolt with complete all as specified and as directed.
S & F 150mm size aluminum adodised handles complete all as specified and as directed.
S & F 150mm size Mild steel oval shape handles complete all as specified and as directed.
M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement including demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.
M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position including demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.
M & L for rubber moulded glossy finished Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 80 mm thick, M-40 Grade, laid over 50mm thick sand cushioning maintaning proper slope as per requirement at site over hardstanding including dismantling of existing tiles of any type complete all as specified and as directed.
M & L for Pre-polished, coloured chequered cement concrete tiles, factory made, Premium quality 300mm x 300mm x 25mm thick, set & jointed in neat cement slurry and pointed flush with grey cement and pigments to match colour of tiles in floors/path etc over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6, after dismantling of exisiting chequred Concrete tiles of any type with bedding layer, complete all as specified and as directed.
S & F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe antisyphonage pipe including trap set in and including concrete etc complete including making good to floor all as specified and dirtected.
S & F in reapir 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket and flush pipe etc complete all as specified and directed
S & F in repairs Vitreous china floor mounted WC (Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, Health Faucet, flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar or equivalent in Cera/Parryware).
S & F in repairs 100mm dia Sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to wall or in floors complete all as specified and as directed.
S & F in repairs 100mm dia Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.
S&F Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixed in repairs, complete all as specified.
S & F tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F in repairs Angle valve of CP any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S & F in repairs Two way Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S & F in repair 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. (Make: Jaquar/Marc/Kohler)
S & F PVC connections 15mm size with PTMT nuts of length 600mm fixed in repair complete all as specified and as directed.
S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S& F Brass chromium plated towel rack of size 600 mm x 350mm, fixed with brass screws, fixed in repairs, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S & F Stainless steel Grating dome 125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.
S & F in repairs CP toilet paper holder fixed with plug and brass screws, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S & F in repairs Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP.
S & F in repairs Brass chromium plated wall mixture 3 in 1 system with provision for hand shower and overhead shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls, fixed in repairs, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-281KN, Jaquar-Cat No. COP-281PM Kohler-Cat No. K-98754IN-4-CP.
S & F in repairs for Full pedestal pattern wash hand basin, size of basin 630mm x 510mm and pedestal of 900mm long ivory colour as approved by GE including fixing waste pipe and chromium plated brass waste fitting complete all as specified and as directed.
S & F in repairs PVC (SWR) Floor/Nahani trap, plain dia of outlet 125mm, complete all as specified and as directed.
S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.
S&F in repairs 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals and Sink etc all as specified and directed.
Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed.
Eacavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed.
Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed.
Removing excavatged matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.
M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed including demolition of existing PCC n exc 15cm thick.
M & L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in surface channels complete.
S & F for Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592, complete all as specified and as directed.
Demolition and breaking up drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar for 150mm to 300mm dia pipe, and removal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed.
M & L for 200 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenches and tested complete all as specified and as directed.
M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 200 mm bore incl forming cradles complte all as specified and directed.
M&L for Plain Cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in lintels up to 1.5 metre clear span, bed blocks, copings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork, complete including demolition of existing coping all as specified and as directed.
Taking down carefully old unserviceable copper/aluminium point wiring from conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, bell ,regulator,ac socket, light fittings,tv & telephone socket and socket etc and making good the disturbed surface of wall / floor/ ceiling etc as original complete all as directed.
M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked through and in and including PVC concealed conduit ISI marked of 20mm dia with all fitting including FRLS, PVC insulated unsheathed 1.5 Sqmm multistranded copper earth wire, connecting to common earth dolly with and incl new Metal flush box for modular switches/sockets/fan regulator etc with Modular cover plates of suitable sizes and making good disturbed surface as original complete all as directed for the following.
One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.
One socket outlet point 5 amps on the same board.
One socket outlet point 5 amps on the independent board.
All as per srl item No 77 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire
S&F of Modular switch 6 Amp, 1 way, 1 module size complete all as directed.
S&F of Modular socket 6 Amp, 2 in 1, universal type, 2 module size complete all as directed.
S&F of Modular switch 16 Amp, 1 way, 1 module size complete all as directed.
S&F of Modular socket 6/16 Amp multipurpose, 2 module size complete all as directed.
Modular Step Fan regulator, 120 watts single / double module, fixed in repairs, complete all as specifed and as directed.
S&F in replacement of Modular AC Socket enclosure (3/4 module) with 25 Amp SP mini MCB, 230 Volts, 50Hz in modular enclosure complete all as specified and as directed.
Supply and fixing of Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps complete all as directed.
S & F in replacement of LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watts, cool/warm white as per site requirement complete all as specified and directed..
S & F in replacement of LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 10 Watts, cool/warm white as per site requirement complete all as specified and directed..
S&F in replacement of LED bulk head fitting of 10 Watt with in built driver, complete all as specified and as directed.
Material and labour in replacement for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multi stranded copper conductor cable ISI marked, drawn into existing PVC conduit with and including 4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to AC/Geyser point complete all as specified.
Material and labour in replacement for Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multi stranded copper conductor cable ISI marked, drawn in to existing PVC conduit with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with complete all as specified.
M&L for Rigid non metallic PVC conduit 25 mm dia medium grade concealed inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete including cutting chases in wall and making good the surface, complete all as specified and as directed.
Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed.
Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.
Supply and fixing in replacement of isolator 40 Amp, SPN type complete all as directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic and accessories, 230 V, 1200 mm sweep with service value not less than 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete.
S&F of Geyser 25 litre capacity 5 Star rating vertical type with steel tank and glass inner linen complete including fastners for hanging and CP and PVC connection for inlet and outlet upto stop cock complete all as directed and depositing the old u/s to store yard.
S&F in replacement of energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as specified and as directed.
S & F in replacement of street light bracket incl clamp, nut and anchor bolt etc make to shape for street light fitting made out of GI pipe light grade 25 mm bore 1.0 mtr long on bend to shape the top of wall of existing building complete all as specified and directed.
S&F in replacement of Ventilating fan 250 mm sweep plastic body type including self cousing louver and making all electric connections, complete all as specified and as directed.
Taking down of ceiling fan any type size complete with blades, fan clamp etc and depositing to MES store yard after dismantling blade complete
S&F MS J hook fabricated out of MS flat 25mm x 3mm and welded to rod bar 8mm dia including nuts and bolts for hanging ceiling fan to ceiling complete.
S&F in replacement of MCCB incommer distribution board (vertical load line DB) double door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 Volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unsv DB complete all as specified and as directed by Engr-in-Charge.
S&F in replacement MCCB 3P 125Amp with breaking capacity 16KA suitable for 415 volts AC supply, with over load and short circuit protection complete all as specified and as directed by Engr-in-Charge.
S&F XLPE insulated armoured heavy duty U/G aluminium conductor cable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire of tape and overall PVC sheathed of size 6 sqmm 2 core including taking down old unsv cable complete
M&L for brick protection to cable using old size class 'B' bricks, laid flat, dry butt jointed, laid lengthwise perpendicular to the axis of cable complete
M&L for earthing complete with GI earth plate electrode 600mm x600mm x6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvanised earth wire 4mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame, GI pipe 15mm dia light grade for protection and GI pipe 20mm dia medium grade for watering with funnel, wire mesh, salt and charcol dust all over the plate all as specified and as directed.
garnet engineers contractors
Akhil Enterprises
M/s Durga Traders
M/S Yamin
Vipul Construction
M/s Shubh Enterprises
K S CONSTRUCTIONS
VIJAY KUMAR GUPTA
M/S MSD & Associate
stage.html
html • 0.07 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .