Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹25.8 L+₹4.6 L (21.7%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹29.5 L+₹8.3 L (39.1%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
23 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 881 EWS C/o 56 APO
GE 881 EWS C/o 56 APO
REPAIR TO HARD STANDING, WALL, PATH, DRAINS, FENCING AND PROTECTIVE WORKS AT GULPUR, SEKHLU, NATU AND POONCH AT VARIOUS UNITS IN AOR OF STN HQ POONCH UNDER GE 881 EWS
2022_MES_533644_1
GE/PNH-20/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE 881 EWS C/o 56 APO
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE 881 EWS
₹60,000
Yes
19 Sept 2022
25 Jun 2022
30 Jul 2022
25 Jun 2022
23 Jul 2022
9 Jul 2022
Amount
Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness, below or above ground level complete all as specified and directed.
Demolition of brick work or stone/boulder masonry build in cement mortar including all quoins arches pillars etc. complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position complete all as specified and directed.
Dismantling posts or struts steel or RCC embedded in concrete any section including taking out embeded portion and making good distrubed groung complete all as specified and directed.
Dismantling of steel or wrought iron or mild steel, barbed wire of any description not otherwise provided for complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M & L for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in mass concrete, filling in, foundation and flooring complete all as specified and directed.
M & L Stone masonry walling of random rubble, bedded and solidly hearted built in CM 1:6 brought upto courses complete all as specified and directed.
All as per Ser item No 8.00 above but except stones complete all as specified and directed.
M & L for brickwork with sub class B bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.
All as per Ser item No 10.00 above but except brick complete all as specified and directed.
M & L for precast cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregates as in bond stones walling, bed plates, anchorage blocks etc and set in CM 1:6 complete all as specified and directed.
Extra over stone walling for hammer dressing to face stones and dressing or face beds and joints with max depression 20 mm as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.
M & L for plain cement concrete 1:2:4 type B-1, (using 20mm graded stone aggregates) as in bed block, coping, benching and similar work including necessary form work complete all as specified and directed.
M&L for boulder filling dry, as in back filling for retaining wall complete all as specified and directed.
M & L for rendering 20 mm thick in cement mortar 1:4 on other than fair faces of brick work or stone masonary surfaces, chajja and suspended work finished even and smooth without using extra cement, complete all as specified and directed.
M & L for flush pointing to random rubble masonry, uncoarsed, in cement mortar 1:3 complete all as specified and directed.
M & L for 15mm thick rendering in CM 1:4 on fair faces of brickwork or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M & L for preparation of newly plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.
M & L for plain cement concrete 1:2:4 type B-2, using 40mm graded crushed stone aggregates as in surfaces channels and drain complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement including forms, moulds mitred/stopped ends etc. complete all as specified and directed.
All as per Srl item No. 21 above but add or deduct for each 25mm girth of part thereof over or under 30 cm complete all as specified and directed.
Excavation in post holes (or similar holes) each n exc 0.5 cu.m, getting out in any type of soil(soft/loose and hard/dense soil), returning, filling inand ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.
M & L for mild steel as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.
Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed.
Fixing only chain link fencing including linewires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.
S & F in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, incl securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.
M & L for mild steel round bars 10mm dia and over Gde Fe-410 W over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for mild steel screw bolts (machine made) 5 to 10mm dia of neck with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc 5cm long (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S & F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railling; framework of water tanks and similar work conforming to Fe 290-Gde E-165 complete all as specified and directed.
S&F MS framed work such as steel gates, including pintle hinges, stops, han made sliding bolts etc and similar work conforming to Fe 290-Gde E-165 complete all as specified and directed.
M&L for preparation of new untreated steel and iron surfaces of any description over 10 cm in girth or width not otherwise described and applying two coats of synthetic enamel paint over one coat Red oxide zinc chrome primer etc complete all as specified and as directed by Engr-in-Charge.
S&F MS TMT steel bars 10mm dia and above, cut to length bent to shape required, including crenking, bending spirally for hopping to columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.
All as per item No 33.00 above but 8mm to 10mm dia bars in stirrups, spacers and binders complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in beams, cantilevers, lintels and like including necessary formwork complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in columns, pillars and like including necessary formwork complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.
Formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar work complete all as specified and directed.
M&L for 20mm thick screed bed or bedding layer in CM 1:4 for laying floor finished complete all as specified and directed.
M&L for high traffic endura tile 20 mm thick, jointless, laid over and including M-35 concrete complete all as specified and directed. Make : Johnson Endura
M&L for sand filing under floor complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade,laid jointed pointed with grey cement and no pigments, complete all as specified and directed by Engr-in-Charge. Note: The sample shall be got approved by GE before bulk procurement & lot shall be got tested independently by the GE.
M/S Ashok Kumar Gupta
mohan lal gupta sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .