Certain repair to joinery, plumbing, flooring, sunken treatment etc in Bn-IV and Arty-II under AGE B/R-I at GE Gurdaspur.

Demolition of cement concrete of any description and in any position(above/below of ground level) not otherwise specifically provided as in sunken floor, plinth protection, roof kerb, foundation etc. all as specified and directed.

M&L for removing existing pointing, raking out joints & flush pointing to bricks laid flat or brick tiles in pavings or brick tiles on roof with CM (1:3) including cleaning the surface grass, mud and like complete all as specified and directed.

M&L for 15mm thick ready mix mortar admixed with integral water proofing compound FOSROC conplast X421IC @ 130ml per bag of cement incl a bonding coat of FOSROC Nitobond AR cement slurry coat (1 vol of Nitobond AR+ 1.5 Vol of water+ 1.5 Vol of cement) complete all as specified.

M&L APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non wove fabric (weight not less than 150 gms/ Sqm) including bitumen primer @ 0.40 kg /Sqm laid on applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m by forced application with butane torch over entire roof area with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed in after cleaning surface complete all as specified and directed and all as per manufacturer's instructions.

M&L for PCC 1:5:10 type E2 (using 40mm graded crushed stone aggregate) as in filling, foundation and mass concrete in sunken floor complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base for receiving the floor finishes complete all as specified and directed.

M&L for prepartion of new surface and applying two coats of aluminum paint on APP membrane complete all as specified and directed.

Roughening the surface of old concrete floor picking sweeping cleaning and washing down with water to remove dust/mud etc.and brushing neat cement slurry @ 3kg/Sqm all as specified and as directed by Engineer-in-Charge.

M&L for cement concrete 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in roof padding average thickness of 50mm complete all as specified.

M&L for glazed ceramic coloured tiles on vertical surface of size 450X300x7mm thick joint free on and incl 10mm thick screed bed in cement moirtar (1:4) set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles including demolition of existing tiles and screed complete all as speciifed and directed by Eng-in-charge