PROVN OF FENCING BEHIND GIRLS HOSTEL OF SCN,HARD STANDING IN FRONT OF P-72 OF 50 FD WKSP COY EME,SCOOTER AND CYCLE PARKING SHED IN FRONT OF P-816 AND P-818 AT KLP PH-I OF 8 SIKH LI,BATHROOM NEAR BLDG NO P-830 AND TOILET BLOCK FOR SCN UNDER GE(W) JRC

Amount

SCHEDULE 'A' PART-I (BUILDING WORK)

Surface excavation n.exc 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil and removing surplus spoil to a distance n exc 50 metre and making good the disturbed surface complete all as specified and as directed.

Excavation in trenches not exc. 1.5 m wide and n. exc. 1.5m in depth for foundation, etc, or for shafts,wells, cesspits, manholes, pier holes etc. and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exc. 1.5 m wide and exc. 1.5m but n. exc. 3.0m in depth for foundation, etc, or for shafts,wells, cesspits, manholes, pier holes etc. and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in, including, spreading, leveling and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated material to a distance n exc 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Material and labour for cement concrete 1:5:10 type E-2 using 40mm graded crushed stone aggregate as in sub base/foundation filling/mass concrete/sunken floor etc, complete all as specified and as directed.

Material and labour for cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base/foundation filling/mass concrete/sunken floor etc, complete all as specified and as directed.

Material and labour for cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in surface channels and drains and other similar work etc, complete all as specified and as directed.

Material and labour for cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in post hole, foundation, filiing and mass concrete, complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, straight or corvered on plan exc. 6.0m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exc. 6.0m mean radius built in cement mortar 1:4 complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exc. 6.0m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and as directed.

Material and labour for hardcore of broken stone or boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed.

Material and labour for sand cushioning for laying of interlocking tiles/ under floors including watering and well ramming complete all as specified and directed.

Material and labour for 60 mm thick, machine pressed precast conctete (white) interlocking paver block, any shape and size, conforming to IS 15658-2006, with grey cement and pigment, M-35 grade complete all as specified and as directed.

Material and labour for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base, finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Non-skid joint free ceramic coloured tiles, 7-8mm thick (Square/ rectangular), area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm; as in floors etc, set and jointed in neat cement slurry and pointing in white or coloured cement to match the surface over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles, size 300mm x 450mm x 6-7mm thick as on vertical surfaces such as dado/skirting etc set and jointed in neat cement slurry and pointing in white cement with pigment to match the surface over and including 10 mm thick rendering or backing layer of cement mortar (1:4) complete all as specified and as directed.

M & L for chequered cement concrete coloured tiles 20cm x 20cm x 25mm thick, with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for 100mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor finished the surface even and fair without using extra cement complete all as specified and as directed.

Material and labour for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection and path finishing, joints filled with bitumen and sand mixer, 50mm thick finished the surface even and fair without using extra cement complete all as specified and as directed.

Material and labour for 50mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection and path finishing, joints filled with bitumen and sand mixer, 50mm thick finished the surface even and fair without using extra cement complete all as specified and as directed.

Material and labour for 40mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in damp proof course in vertical/horizontal surfaces including necessary formwork and applying evenly a coat of blown bitumen @ 1.5kg/ blended with clean dry sand @ 0.05cum/sqm complete all as specified and as directed.

Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter surface fair finished complete all as specified and as directed.

Material and labour for form work to soffits of suspended slabs such as roof slabs, floor slabs, shelves, landing and similar work not exceeding 200mm thick (horizontal or sloping) and to edges of concrete surface fair finished complete all as specified and as directed.

Material and labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide surface fair finished complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work etc. complete all as specified and as directed.

Material and labour for re-inforced cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregate in foundations including rafts, column footings, plinth beams, under reamed piles and the like complete all as specified and as directed. (Reinforcement shall be measured and paid for separetely)

Material and labour for re-inforced cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. (Reinforcement shall be measured and paid for separetely)

Material and labour for precast reinforced cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregate in manhole/drain cover, landing and similar articles, including necessary form work, cover fixed in position and set in cement mortar 1:4 complete all as specified and as directed.

Supply and fixing mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde-E- 250) quality-A complete all as specified and as directed.

Supply and fixing steel work in tubular section for posts, purlins etc including special shaped washer, angle cleats, holdfast, gusset plates etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 cut or notched forming holes, without any attachement including drilling, fitting, riveting and or welding or connecting with and including bolts and nuts, providing and fitting cleats,welding, turning up and fixing complete all as specified and as directed.

Material and labour for mild steel framed work as in doors or gates of angle or other section like MS tubular hollow section with gusset plates, rails, braces, roller and roller plate etc., complete, drilled for fixing of steel sheeting or other covering. Doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; fencing posts and struts in fencing including necessary cutting, drilling, welding etc and bending to swan neck shape as required and drilling holes notching for wire etc conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Supply and fixing mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Supply and fixing mild steel bolt purpose made with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut with not exc. 12mm diameter of neck and not exceeding 30cm long complete all as specified and as directed.

Material and labour for mild steel high yield strength round bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for mild steel high yield strength TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for mild steel high yield strength round bars 6mm to 8mm dia cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in stirrups and spacers complete all as specified and as directed.

Supply and fixing mild steel galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. (each line of wire to be measured)

Supply only chain link fencing MS galvanisd fencing, any size or type complete all as specified and as directed.

Fixing only mild steel chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire10 guage thick galvanised steel wire mesh fixed to steel fencing post by nut & bolts etc including provision of binding wire complete all as specified and as directed.

Supply & fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws or fixed with ‘L’ & ‘J' hooks or cranked bolts complete all as specified.

Supply and fixing PVC solid door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, as per specification mentioned in preambles of section-8 and drawing shown on SSR Part-II (2010) and complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour 10mm thick PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

Supply and fixing 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.

Supply and fixing 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing 150mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing aluminium cast type anodised handle 150mm long complete all as specified and directed.

Supply and fixing aluminium alloy fabricated type anodised handle 150mm long complete all as specified and directed.

Supply and fixing 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing 100 mm size extruded aluminium anodised butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply, laying, jointing and testing 15mm bore galvanized iron steel tubing medium grade with all fittings such as bends, elbows, sockets, tees, reducers etc, fixed to walls, ceiling or laid in floors, including cutting through wallcomplete all as specified and as directed.

Supply, laying, jointing and testing 20mm bore galvanized iron steel tubing medium grade with all fittings such as bends, elbows, sockets, tees, reducers etc, fixed to walls, ceiling or laid in floors, including cutting through wallcomplete all as specified and as directed.

Supply, laying, jointing and testing 25mm bore galvanized iron steel tubing medium grade with all fittings such as bends, elbows, sockets, tees, reducers etc, fixed to walls, ceiling or laid in floors, including cutting through wall including taking up or down steel tubing and connections, including cleaning for refixing or removal to storecomplete all as specified and as directed.

Supply and fixing 15mm bore stop/angle valve, fancy type cast copper alloy chromium plated with long shank (concealed type) screwed down high pressure with crutch or butterfly handle screwed at right angles on both ends for iron pipe or for union complete all as specified and as directed.

Supply and fixing 15mm bore stop/angle valve, fancy type cast copper alloy chromium plated with long shank screwed down high pressure with crutch or butterfly handle screwed at right angles on both ends for iron pipe or for union complete all as specified and as directed.

Supply and fixing in repair 15mm bore stop/angle valve, fancy type cast copper alloy chromium plated with long shank screwed down high pressure with crutch or butterfly handle screwed at right angles on both ends for iron pipe or for union complete all as specified and as directed.

Supply and fixing 15mm bore bib tap with long body chromium plated fancy type, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixing 15mm dia pillar taps cast fancy type copper alloy with capstan heads cromium plated screwed down high pressure with long screwed shanks and fly screwed for iron pipes complete all as specified.

Supply and fixing 20mm size ball valve brass with polythylene float and fly nut screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Supply and fixing 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Supply, hoist and fixing in position, 500 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including supply and fixing 20mm dia, 450mm long GI washout pipe (medium grade) with plug and 20mm dia, 600mm long overflow GI pipe (medium grade) with all fittings including dismantling the existing tank complete all as specified and as directed.

Supply, hoist and fixing in position, 1000 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including supply and fixing 20mm dia, 450mm long GI washout pipe (medium grade) with plug and 20mm dia, 600mm long overflow GI pipe (medium grade) with all fittings including dismantling the existing tank complete all as specified and as directed.

Supply and fixing brass chromium plated tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges fixed with brass chromium plated screws complete all as specified and directed.

Supply and fixing brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed.

Supply and fixing vitreous china wash hand basin, white, flat back 580 x 450mm excluding taps, waste chain and plug and porcelain stopper but including bracket and cutting for and pinning in ends of brackets complete all as specified and directed.

Supply and fixing vitreous china wash hand basin, white, flat back 550 x 400mm excluding taps, waste chain and plug and porcelain stopper but including bracket and cutting for and pinning in ends of brackets complete all as specified and directed.

Supply and fixing in repair 75 mm bore PVC (SWR) pipes of pressure rating 4Kg/Sqcm, single socketed in any length with rubber joints fixied to walls/ in floors/trenches complete all as specified and as directed.

Supply and fixing in repair 110 mm bore PVC (SWR) pipes of pressure rating 4Kg/Sqcm, single socketed in any length with rubber joints fixied to walls/ in floors/trenches complete all as specifid and as directed.

Supply and fixing 110mm bore PVC (SWR) bend (any radius), with access door complete all as specifid and as directed.

Supply and fixing 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specifid and as directed.

Supply and fixing 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specifid and as directed.

Supply and fixing grating chromium plated 150mm dia with centre hole fixed in cement mortar 1:3 complete all as specified and as directed.

Supply and fixing 32mm dia PVC waste pipe for wash hand basin complete all as specified and as directed.

Material and labour for PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and as directed.

Supply and fixing 40mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm complete all as specified and as directed.

Material and labour for salt glazed stone ware drain pipes 150mm bore laid in trenches and jointed in cement mortar1:1 complete all as specified and directed.

Material and labour for PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in concrete bed to 150mm bore SGSW drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Material and Labour for 150mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars in cement mortar complete all as specified and as directed.

Material and labour for PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in concrete bed to 150mm bore NP2 drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe of internal diameter 150mm and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed.

Supply and fixing half stall vitreous china urinal bowl, flat back, coloured complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm brass screws, pointing around urinal back in cement and union for discharge and PTMT waste coupling, PVC heavy duty waste pipe complete all as specified and as directed.

Material and labour for fixing Orissa pattern squatting pan with integral foot rest, vitreous china white of size 580mm x 440mm including making connection to trap, flush pipe, antisyphonic pipe (but excluding flushing pipe and flushing cistern), provision of lime concrete bedding and breaking up existing damaged WC and connecting flush pipe etc and making good the floor surface complete all as specified and directed.

Supply and fixing vitreous china wash down water closet pan (pedestal pattern), white, and connection to drain (or outgoing pipe) and connection to flushing pipe, anti-syphonage pipe, brass chromium plated jet with flexible pipe, plastic seat cover with connection of suitable length etc complete all as specified and as directed.

Supply and fixing cast copper alloy CP jet spray for EWC etc complete all as specified and as directed.

Supply and fixing 10 litres capacity PVC valveless syphonic action type, low level flushing cistern ISI Marked white with inlet, ball valve, float and handle including brackets fixed complete all as specified and as directed.

Supply and fixing 450mm long PVC connection fiber reinforced, for Hot/Cold water 15mm size with PTMT nuts and washer on both ends complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:4 mixed with water proofing compound on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and as directed.

Supply only water proofing compound complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi tred/stopped ends etc. inner girth will be measured complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and as directed.

Material and labour for 5mm thick rendering in cement mortar 1:3 on fair faces of ceiling surfaces finished even and smooth without using extra cement complete all specified and as directed.

Material and labour for 12mm thick rendering in cement mortar 1:3 on fair faces of brick work or concrete surfaces of top of roof, finished even and fair without using extra cement complete all specified and as directed.

Material and labour for preparation of new plastered or un-plastered surfaces of wall and applying three coats of white wash etc complete all as specified and directed.

Material and labour for preparation of new plastered or un-plastered surfaces of ceiling and applying three coats of white wash etc complete all as specified and directed.

Material and labour for preparation of new plastered or un-plastered surfaces of wall and applying two coats of colour wash over a coat of white wash etc complete all as specified and directed.

Material and labour for preparing new plastered or unplastered wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour for LLDPE septic tank, designed to carry sewage and sludge water, excavation in any type of soil, plain cement concrete 1:4:8 in foundation, Vent shaft, making connection etc for 30 users with up flow filter media etc complete all as specified and as directed.

Material and labour for 3.00metre dia and 4.50metre effective depth soakage well, including necessary excavation in any type of soil, plain cement concrete 1:3:6 in foundation, honey combing masonry wall with top ring of M-25 design mix concrete, intercepting chamber and screen chamber made of brick masonry in cement mortar 1:6, RCC precast cover slab in M-25/SFRC cover, interconnecting pipes of RCC/DWC, filled with brick bats etc complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and disposal of rubbish outsideMD land complete all as specified and directed.

Material and labour for 25mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate), as in leveling coourse finished concrete surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for 18-20mm thick machine cut kota stone slab as in flooring, treads and landings of stair cases over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing up to mirror/ granite finished and rounding of edges over and including screed bed or bedding layer of cement mortar 15mm thick finished in cement sand mortar 1:6 including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and as directed.

Material and labour for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the slab including rubbing and polishing and rounding of edges surface over and including screed bed or backing layer of cement mortar 10mm thick finished in cement sand mortar 1:4 complete all as specified and as directed.

Taking down Chowkhat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (Without taking off shutters from the frames complete all as specified and directed. Note : Unit rates quoted by the contractor shall deem to include for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but not exc. one brick.

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters (Without taking off shutters from the frames complete all as specified and directed. Note : Unit rates quoted by the contractor shall deem to include for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but not exc. one brick.

Supply and fixing powder coated aluminium window with double shutters (both glazed and gauged) with and including aluminium grill and GI wire cloth 0.46mm dia of wire and 1.18mm aperture, fixed on aluminium frame 150mmx37.5mmx1.5mm thick, shutter with bottom rail, middle rail, top rail and styles of size 44.45mmx47.62mmx1.2mm thick as per IS 737-1986 and glazed with tinted glass (Modi guard) 5mm thick as per standard practices and with handle, hinge & tower bolt arrangements complete all as specified and directed.

Supply and fixing powder coated aluminium door fixed on aluminium frame of section 47.62mmx44.45mmx1.2mm thick, shutter glazed with tinted glass (Modi guard) 5mm thick fixed with rubber gasket and aluminium strips as per standard method also rubber gasket at frame so as to make air tight with cast type handle aluminium anodised of 150mm size 2 Nos (One on each side of shutter) with shutter bottom rail 150mm x44.45mm x1.2mm thick section, middle and top rail 83.5mm x44.45mm x1.2mm thick section, side style 83.5mm x44.45mmx1.2mm thick section all as per IS 737-1986 fixed with aluminium (extruded section) hydraulic door closer regulated designation No-3 universal type and make with aluminium tower bolt arrangement of standard make with locking arrangement with 6 levers mortise lock (brass body) of size 100mm etc complete all as specified and directed.

Supply and fixing double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150mm overall length of cover plate complete all as specified and directed.

Supply and fixing solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed by Engr-in-Charge.

SCHEDULE 'A' PART-II (ELECTRIFICATION WORK)

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 650/1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one light / call bell / fan point controlled by one, one way switch complete all as specified and as directed.

Material and labour for concealed point wiring with 4 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 650/1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 2.5 Sq.mm size in green colour, for one six pin socket outlet 15 Amps on independent board for AC complete all as specified and as directed.

Supply and fixing switch piano flush button type, 5 Amps, AC, single pole, one way, 230 Volts (ISI Marked) complete all as specified and as directed.

Supply and fixing switch socket combination, outlet multi purpose universal type, 15 Amps, AC, 6 pin, single pole, one way, 230/250 Volts (ISI Marked) complete all as specified

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm having 3 terminals, PVC polycarbonate, isolated body complete all as specified and as directed.

Supply and fixing sheet metal enclosures for MCB's, single door, distribution board single pole and neutral 4way, 240 Volts with 200Amps rated bus bar complete all as specified and as directed.

Supply and fixing MCB's, single pole and neutral, 32 Amps, 240 Volts complete all as specified and as directed.

Supply and fixing MCB's, single pole, 6 to 32 Amps, 240 Volts complete all as specified and as directed.

Supply and fixing lamp holder, PVC/ Polycarbonate insulated body with back plate suitable for batten fittings including 5watts LED bulbcomplete all as specified and as directed.

Supply and fixing LED batten light fitting (double side) 1X22Watts decorative ultra slim aluminium square profile LED light fixture retrofit with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI 6500K (white light) with LED rod 22Watts with fixtures box type and making electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75Sqmm 3 core complete all as specified and as directed.

Supply and fixing in replacement of LED street light fitting 1X25Watts including lamp made of pressure die cast housed with toughened glass and high power LED with secondary optics, IP66 protection, impact resistance of IK 07 & 10 KV external surge protection device including necessary brackets, nuts, bolts and washer as required for fixing and making electrical connections complete to by using PVC insulated and overall sheathed flexible copper conductor of size 0.75 sqmm 3 core complete all as specified and as directed.

Supply and fixing sub main wiring with two single core PVC insulated unsheathed, FRLS multistranded copper conductor cable of size 6 sqmm and one single core PVC insulated unsheathed, FRLS multistranded copper conductor cable green colour of size 4 Sqmm as earth lead through and including 25mm dia PVC concealed conduit with fittings, cutting, chases etc complete all as specified and as directed.

Supply and fixing 300mm sweep metal body heavy duty exhaust fan, AC single phase 230/240 volts with louvers/shutter with mounting brackets with suitable size of nuts, bolts, washers make opening in the wall of required size for fixing the exhaust fan and making good the disturbed wall/plastered surface and making electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 1.5Sqmm 3 core complete all as specified and as directed.

Material and labour for earthing complete with galvanised steel earth plate, electrode 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25 metre below normal ground level) with top edge of the plate not less than 1.5metres below normal ground level, connected and including GI earth lead wire 4mm dia connected to earth plate by means of nuts, bolts, check nuts and washers of galvanised iron or steel, GI earth wire protected by 15mm dia GI pipe 'light grade' upto 2 metre above ground level and connected to machinery earth plate surrounded by packed alternate layers of charcoal and common salt 15cm thick all around top and bottom and watering pipe 20mm bore GI light grade all as shown in electrical plate No 3 of SSR Part-I of 2009, testing on completion including providing PCC chamber (1:3:6) using 20mm graded stone aggregate and 50mm thick cover with RCC 1:2:4 type B-1 and 8mm dia TMT bars 100mm C/C bothway and frame including excavation earthwork and returning filling etc, complete all as specified and directed. Note :- Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit.

SCHEDULE 'A' PART-III (WATER SUPPLY WORKS)

Excavation in trenches not exc. 1.5 m wide and n. exc. 1.5m in depth for foundation, etc, or for laying cable/GI pipe etc. and getting out in hard/dense soil complete all as specified and as directed.

Returning filling in, including, spreading, leveling and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated material to a distance n exc 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Material and labour for cutting for 25mm bore pipe existing steel tubing for alterations or additions (Each cut measured) complete all as specified and as directed.

Material and labour for screwing existing 25mm steel tubing for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and as directed.

Supply and fixing 25mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Supply, laying, jointing and testing 25mm bore galvanized iron steel tubing medium grade with all fittings such as bends, elbows, sockets, tees, reducers etc, fixed to walls, ceiling or laid in floors, including cutting through wall complete all as specified and as directed.

M/S Kuldip Construction Co.