Repair and maintenance of 11KV/550Volt overhead line and erection of stay sets, insulators, pole cement concreting, pole painting etc. and providing of 11 KV, 800 A GOAB Switch near River Side Pump House under colony maintenance (9.0) under Kathara C

Amount

Supplying and erection of stay set complete (galvanized) with 19/20 mm dia X 1.8M long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20mm X 60 cm), 7/4.00 mm dia G.I. stay wire and strain insulator etc. in cement concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required.

Supplying and erection of galvanized ‘D’ iron clamps complete with shackles insulator (100MM X 110MM), G.I bolts and nuts, washers coach screws etc. as required.

Supplying and erection of 100mm X 80mm pin insulator complete with G.I. spindle and nuts etc. as required.

Providing and making steel pole collar with cement concrete 1:3:6 (1 Cement: 3 Coarse sand : 6 Graded stone aggregate 20mm nominal size) of specified size and shape including farm work. Plastering if required curing etc. as required. (volume of pole / pipe not to be deducted) (0.75 x 0.75 x 1.0) x 10 nos. of poles = 5.625 Cum.

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE Aluminium conductor cable of 11KV grade as required :- Cable 120 Sq.mm to 150 Sq.mm

Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE Aluminium conductor cable of 11KV grade as required :- Cable 120 Sq.mm to 150 Sq.mm

Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanized clamping arrangement, G.I. bolts, nuts, washers etc. as required.

G. I nuts and through bolts with washer 5/8” x 2”.

Earthing with G.I. copper plate 600mm x 600mm x 03mm thick including accessories and providing masonry enclose with cover plate having locking arrangement and watering pipe of 2.7 mtr long etc. with charcoal/coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Red oxide paint for painting of pole with bracket (10 Nos.)

Aluminium paint for painting of pole with bracket (10 Nos.)

Providing of GOAB Switch 800Amps (heavy duty) horizontal type

Labour Charge for SI. No. 1.11, 1.12 and 1.13

Total impact of GST for the purpose of CTC

M/S TIGER ENTERPRISES

M/S JAY GURU CONSTRUCTION