Improvement upgradation to the Electric System in the ward No. 19 at Govt. SMGS Hospital Shalamar Jammu.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 x 1.5 Sq.mm + 1 x 1.5 Sq.mm earth wire

2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 x 16 Sq.mm + 2 x 6 Sq.mm earth wire

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 6/16 amp.

Single pole & Neutral 32 Amp

Supplying and fixing following modular type switch/socket on the existing switch box cover including connections etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/m recessed steel/ PVC conduit as required.

1 x 1.5 sq. mm

2 x 4 sq. mm

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way Double door

6 way Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way Double door

Supplying and fixing of following rating 240/415 Volt's "C" Series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning. (Above to 32 Amp)

TPN 63 Amp

Supplying and fixing of fixtures/fittings.

4' Tube light 18/20 watt.

Supply, installation, testing & commissioning of GI Electrode Earthing with 50mm dia and 3 meter length, with 3mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover.

Supplying and laying 25mm x 5mm G.I strip at 0.50 metre below ground as strip earth electrode including connection/terminating with G.I nut, bolt, spring, washer etc. as required. ( Jointing shall be done by overlapping and with 2 sets of G.I nut bolt & spring washer spaced at 50mm).

Supply, installation, testing & commissioning of maintenance free copper earthing system with 3 mtrs. Electrode 40 mm dia with minium 2mm thick and does not require manual additional of water. The electrode shall be pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. the electrode shall be surrounded by suitable powdered form of BEE MOIST so as to provide maximum contact between the electrode and the compund. The compound should be eco-friendly The earthing pit should be covered with PVC cover.

Supplying and laying 25mm x 5mm copper strip at 0.50 metre below ground as strip earth electrode including connection/terminating with nut, bolt, spring, washer etc. as required. ( Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm).

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

MCCB- 200 Amp- 36 KA- FP (ICU=ICS = 100% Adjustable type)

MCCB- 150 Amp- 30 KA- FP (ICU=ICS = 100% Adjustable type)

Aluminium Bus bar 500 amp 4 strip.

Bus Bar Chamber for earthing including copper bus bar as required including connections etc. as required. (1 CFT)

Supplying and fixing of 1.1 KV PVC insulated and PVC sheathed XLPE Aluminium Power Cable of following sizes on surface/surface cable tray etc. as required including carriage upto site of work. (Make as per annexure enclosed)

95 Sq.mm 3.5 Core Armored

120 Sq.mm 3.5 Core Armored

Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC, 50 Hz supply. including connections etc. as required.

Ceiling fan 1200 mm sweep alongwith 1"-6" long fan rod.

Exhaust fan 300 mm size

Exhaust fan 380 mm size (Heavy Duty)

Wall fan 400 mm size

Supply Installation testing and commissioning of 30KVA/ 27KW True Online , DSP Controlled online UPS with 3 phase AC input 325V to 450V, 50Hz and 3 phase AC output 415+/- 1%, 50+/-0.5HZ with 30 minutes backup on 12V SMF batteries Bank with open Rack along with inter connecting battery cables and cable from UPS to Battery bank ( min. VAH required for battery Bank =24000 VAH) ,The UPS should be with IGBT Based Rectifier and Inverter and with LCD/LED display for monitoring of its status along with inbuilt Galvanic Isolation Transformer. Make only. UPS should have following Features: UPS power factor : Input PF should be 0.99 AND output PF not less than 0.9 , Efficiency: up to 94% without Isolation ,Communication interface :RS232/USB port and optional SNMP compatibility for remote Monitoring , Audible Alarm : Mains Failure/Low battery /UPS Warning /Overload/Fault & Bypass Mode , THDI: not more than 5% , Noise Level less than 70db ,CERTIFICATIONS & Standard : ISO-9001-14001 Certified ,Compatibility with DG Genset , Built in Automatic & Maintenance Bypass Switch , Warranty : 2 Years on UPS as well as on Batteries, Battery Make : Exide /Amaron-Quanta/ Panasonic Make Only, Preferred/Approved Brand : APC-Schneider /Emerson –Vertiv /Legrand-Numeric. OEM should have own service center in the region for better services.

M/S NEW LIFE ENTERPRISES

AMIT KUMAR CHOPRA GOVT CONTRACTOR

SV ELECTRICALS

K K CONSTRUCTION