WORK OF EXTERNAL ELECTRIFICATION FOR 08 GOs 12 NGO And 48 Constable Qtrs. 29th Bn. S.A.F., Datia..

Amount

H Beam 152x152 Supplying and erection of HT/LT over head line single length supports complete with aligning and keeping it in truly vertical position, including digging pit of required size in all type of soil/ hard rocks filling with 1:3:6 cement concrete of 0.60 mtr. dia. around the pole up to ground level including muffing of 0.45 mtr. dia. from ground level to 0.45 mtr. high as per specifications with 20 cm. thick base foundation in 1:3:6 cement concrete as required refilling the pit with boulder and soil as required, including painting of pole with bitumen paint below GL and two coats of red oxide and two coats of aluminium paint or synthetic enamel paint above GL as directed complete as per specification. The depth of burying of pole shall be 1/6th of the length of pole.

H Beam 152 * 152 mm , 37.1 kg / meter , 13meter long

POLYMER PIN INSULATOR Supplying and fixing polymer type 11KV / 33KV pin insulator with GI pin, of approved make on existing pole or bracket with other necessary materials complete as required.

(i) 11 KV 5 KN PIN Composite Polymer Insulator

AAAC DOG Conductor 0.10 sq. inch (100sq. mm. Al.Eq) Supplying and drawing AAAC conductor of approved make with stringing making off complete with binding at existing insulator, jointing, jumpering, teeing off connecting etc. as required and clearing of obstacles (if any).

AAAC RABBIT Conductor 0.05 sq. inch (55sq. mm. Al.Eq) Supplying and drawing AAAC conductor of approved make with stringing making off complete with binding at existing insulator, jointing, jumpering, teeing off connecting etc. as required and clearing of obstacles (if any).

Providing and fixing 4.0mm (8 SWG) dia G.I. wire on surface or in recessed for loop earthing as required(For guarding wire)

Providing and fixing 4.0mm (8 SWG) dia G.I. wire on surface or in recessed for loop earthing as required(For guarding wire)

Aluminium Binding Wire and Tapes upply & fixing of Aluminium Binding Wire and Tape complet as per specification.

ANTI CLIMBING DEVICE BARBED WIRE Supplying and fixing 2 ply 12 gauge barbed wire around the existing HT/LT electric pole for safety measures as per IE rules including all stapples and all other necessary materials complete as required as per specifications.As per enclosed drwaing no.1.

STAY SET Supplying and erection of GI/MS stay set complete with stay rod, anchor plate of size 300x300x5mm, thimble, stay clamp, turn buckle, bow tightener etc. with stay wire, strain insulator, nut bolts as per specifications including excavation in all type of soil/ rocks and foundation in cement concrete 1:3:6 of required size and other necessary materials complete as required as per specifications

(i) GI Stay Rod 20mm dia (Painted) 1.8 m long with 7/4.00 mm (7/8 SWG) stay wire for HT line

(ii) GI Stay Rod 16mm dia (Painted) 1.8 m long with 7/3.15(7/10SWG)mm stay wire for LT line.

DANGER BOARD ENAMELED Providing and fixing enamelled danger caution plate/board on existing electric poles or wherever required of size 250x200 mm, made of 1.6mm thick mild steel sheet and vitreous enamelled white, with latest, figures and the conventional skull and cross-bones in signal red colour (as per IS-5-1978 with latest amendment) on the front side. The rear side of the plate shall also be enamelled. The corner of the plate shall be rounded off with required material such as screws, wires clamps, nut bolts etc. complete.

EARTHING COIL OF 115 TURNS OF 50 MM DIA.2.5 MTR.LEAD OF 4.0 MM G.I.WIRE Providing and fixing earthing arrangement for HT/LT poles with 8SWG GI lead of 115 turns of 50 mm dia. connection with pole / cross arm / control junction box on pole with 4 mm dia. GI lead through 20 mm dia A class GI protection pipe of 2.5 m length duly bend, packing of charcoal powder and salt as per specification including excavation of pit in all type of soil / rock, refilling of pit by black cotton soil etc. complete

DTR 11/0.4 KV BIS EE - LEVEL-2 Supplying installing, connecting, testing and commissioning of 3 Phase, 50 Hz, 11/0.433 KV , Delta/Star connected, Aluminium/Copper wound, oil filled, Indoor/outdoor type, Distribution/Station transformer of accepted standard specification, level-2 catagory class, with accessories such as drain & filter valve, earthing terminals, lifting arrangements of suitable size, dehydrating breather with silica gel of suitable size, Conservator tank, air release devise, Rating & diagram plate including CI rollers, Radiators with shut off valve, Cable end boxes on HT & LT side bushings, Explosion vent with diaphragm, Off load tap changing switch, Buchholz relay, thermometer pocket with 6” dial type thermometer & OTI, wherever required complete with first filling of oil with installation on existing DP structure or foundation etc. complete as per specification. The no load and full load losses should not be more than as mentioned below

DTR 11/0.4 KV ,100 KVA BIS EE - LEVEL-2

DTR 11/0.4 KV ,200 KVA BIS EE - LEVEL-2

Supply Installation and testing jointing sleeves for dog ( 100 sqmm al Eq.) AAAC

Supplying and Fixing Complet 11 kv single pole cut point fitting 100*50*6 mm channle with nut bolt and required clamping and short member

Supply, fabrication and erection of angle/channel/flat iron fitting for overhead line & sub-station etc such as 'D' bracket, cross arms, top clamp, 'V' cross arms, back/support clamp or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of aluminium paint as required as per specification.

Supplying Installatin Testing and Commissioning of D.P. structurre over existing support with painting in an approved manner consisting of following:- (a) D.C. cross arm with clamp and nuts bolts (100x50x6mm channel) – 1Set (b) 11KV D.O. fuse unit, lighting arrester and A.B. switch mounting channels with nuts and bolts (75x40x6mm channel) as required –1 set. (c) Transformer mounting cross arms with clamps nuts and bolts (100x50x6mm. Channels) – 1 set. (d) Transformer belting with 50 X 50 X 6 mm.angle with two cross fixing channels & Clamping Set (E) Distribution pannel mounting channel and clamp with nuts and bolts etc. (75x40x6mm channel).-1 set (F) S/f DTR metering -LT 3 phase 4 wire 3x240 volts IB=5 amps lmax x 10 amp, trivector meter class of accuracy 0.5s, DLMS Compliant category A Meters along with GSM (GPRS compatible) modem with box as per MPEB specification complete. Make:- Genus, L&T, Sceure Meters Limited (G) G.I. pipe earthing complete with G.I. strip 25x3 mm as required complete.7 Nos.-1 Set (H) A.B. Switch single phasing 400 AMP as per M.P.E.B. norms completed. 1 Set Make :- G.K. Electrical, Kiran, Jaipuria, Atlas, Pactil, Techno fiber, Rashtriya Electrical & Engineering corporation (I) L.A. polymer type as per M.P.E.B. norms specification complete. Make :-Oblum, Elpro, I.G.E., GK, Rajtree, Rastriya Electricals & Engineering corporation (J) 11 KV 200 Amps DO Fuse (3.nos) 1 Set Make :- G.K. Electrical, Kiran, Jaipuria, Atlas, Pactil, Techno fiber, Rashtriya Electrical & Engineering corporation (K)LT bimetallic clamp for DTR (L)HT bimetallic clamp for DTR

(m) D.P. structure complete as above. Complete as above (A to l)

LT DISTRIBUTION BOX WITH HRC FUSE FOR 100 KVA DTR Providing and fixing outdoor type pole mounting weather, dust and vermin proof LT distribution box made of 14 /16 gauge MS sheet with clamping arrangements, lockable hinged door duly painted on all sides with red oxide after antirust and corrosion treatment, two coats of synthetic enamel paints of approved make and shade, consisting of following fittings. L.T. Distribution box suitable for 63/100/200/315 kva transformer (without TPN Switches) with required amp MCCb/Isolator on incoming side and PF HRC units on outgoing side. or

(a)For 100 KVA Transformer (300amp isolator of 9 SP/HRC of 160/200amp & 9 no. J type al hook.) TPMCCB 200 amp 25 ka Breaking capacity completes as required as per mpsseb latestt notification

(a)For 200 KVA Transformer (300amp isolator of 9 SP/HRC of 160/200amp & 9 no. J type al hook.) TPMCCB 200 amp 25 ka Breaking capacity completes as required as per mpsseb latestt notification

PVC Alluminium Armoured & XLPE Alluminium Un Armoured CABLES Supplying, laying, testing and commissioning of XLPE insulated and PVC sheathed heavy duty power cable confirming to IS 7098/Part-I/88 with latest amendments, 1100 volts grade armoured cable of approved make with aluminium solid / stranded conductor. The cable shall be laid in air/in existing pipe/in existing cable trench/on existing cable tray with clamp as required as per specifications including providing of metal/PVC cable identification tags at both ends and every 10 Mtr. length of cable with inscriptions there on.

XLPE LT single -Core Alluminium Un armoured cable 70 Sq.mm

XLPE LT single -Core Alluminium Un armoured cable 150 Sq.mm

XLPE LT single -Core Alluminium Un armoured cable 300 Sq.mm

Providing and erection of hot dipped galvanized octagonal poles in single section made from 3mm thick sheet having lockable weather proof flush door junction box, suitable size & type of foundation bolts 4 nos. 'J' type (EN8 grade) complete, erected in an approved manner on provided foundation.( sor i.no.42.98)

7 meter height, 130 X 70mm A/F, 220x220x12mm base plate, 4 nos. X 20 x 700mm bolt( sor i.no. 42.98.5

Providing and fixing of bakelite sheet 10mm thick, one MCB 6Amp-32Amp SP & 16sq.mm stud type 4 way epoxy connector for decorative designer poles /octagonal pole box.( sor i.no. 42.103)

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor

Armoured 2 core 10 sq. mm.

Supplying and installing double wall corrugated pipes (DWC) of HDPE (IS 14930 Part II -marked) for cable laid underground with necessary material and at required depth upto 90cm. below road/ground surface, including excavation, back filling with excavated material, ramming and making the surface good.

50.00mm outside dia.

Laying of one number armoured / unarmoured power cable 1.1 KV grade of size exceeding 25 sq. mm but not exceeding 120 sq. mm. in the existing RCC Hume /Stone ware/G.I. Pipe/surface in existing trench as required.

Providing and fixing of sword canopy type single arm GI bracket upto 2 meter Long for 90mm A/F top octagonal pole

Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :-

Single pole MCB SP 0.5Amp to 5Amp 10kA rating

Supplying and installing of SPDs (surge protection device) ISI marked complete as per I.S. standard conforming to IEC:61543 -11 for direct & indirect lightning surges protection type 2 maximum discharge current (Imax) up to 70kA &type 1+2 (Imax) up to 100KA including connection in existing enclosure in approved manner as per specification.

Type 2 : 40kA, 1P+N protection against indirect lightning & switching surges

Supplying and fixing of analog time switch for automatic ON - OFF street light of approved make in existing LT panel including connections etc. as required as per specification

Supply and fixing street light with high power LED of 3 to 6 Watt each on existing bracket assembled on single MCPCB and additional unique peanut lens on each LED, system lumens output with efficacy>120 lm/Watt. luminiare having color temp upto 6500K & 50000 hrs. burning life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF> 0.95 & surge protection 10KV. Housing made of pressure die cast aluminium with heat resistant flat glass, IP65 protection. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347 i/c connection wire, testing etc. to complete the job.

90Watt, color temp 3000-6500k as required.

Designing and construction of footing foundation for octagonal pole of desired size including excavation in soil/soft rock, base concrete M-7.5 (1:4:8), 15mm thick and pedestal of RCC M-20 (1:1.5:3), required tar steel reinforcement for required size from base concrete, shuttering, curing etc. with existing foundation bolts complete as per specifications in an approved manner as per manufacturer drawing or engineer-in-charge.

Providing and fixing chain link fencing sourriding existing DTR S/S finical (37 feet) of 6’ height with chain ling fencing on MS Angle (50X50X6) mm support 7 nos. 7’ height with following feature. (A) Upper & lower frame of fencing will be of MS angle (25X25X4) mm size. (B) MS strip of (25X5) mm flat shall be used fro cross bracing of fencing (C) Double Gate (2 Nos. 2.5’X5’) of MS angle (50X50X6)mm. bracing of 25X5 mm flat with mesh & locking arrangement. (Complete as above AtoC) – one job.