Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.8 LAccepted-AOC SPECIAL 1 INDUSTRIAL ESTATE NEW POWER HOUSE ROAD JODHPUR 342003 | JODHPUR | RAJASTHAN | 342003 | ₹18.8 L Quoted ₹19.5 L | L1 | Accepted-AOC Being Lowest |
| 2 | L2₹19.9 L+₹39,050 (2.00%)Rejected-Finance 205 PARSHAV VIHAR PLOT NO 50 IP EXTN PARPARGANJ DELHI 110092 | EAST | DELHI | 110092 | ₹19.9 L+₹39,050 (2.00%) | L2 | Rejected-Finance Being other than lowest |
| 3 | L3₹20.3 L+₹75,400 (3.87%)Rejected-Finance 205 PARSHAV VIHAR PLOT NO 50 1 P EXTN PATPARGANJ DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | ₹20.3 L+₹75,400 (3.87%) | L3 | Rejected-Finance Being other than lowest |
| 4 | L4₹26.8 L+₹7.3 L (37.3%)Rejected-Finance RZ A2 2 CHANAKYA PLACE PART I OPP C 1A BLOCK JANAK PURI NEW DELHI 110059 | NEW DELHI | WEST DELHI | DELHI | 110059 | ₹26.8 L+₹7.3 L (37.3%) | L4 | Rejected-Finance Being other than lowest |
| 5 | L5₹33.6 L+₹14.1 L (72.1%)Rejected-Finance | ₹33.6 L+₹14.1 L (72.1%) | L5 | Rejected-Finance Being other than lowest |
| Sl No | Description | Qty | Unit | SANJEEV ENTERPRISES L3 | INDO CONSTRUCTION L1 | Saini Enterprises L2 | sony engineering works L6 | RUCHIKA ENGG.WORKS L4 | SK ASSOCIATES L5 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking out filter from AHU up to 1000 CFM to 16000 CFM or any capacity and cleanning of coil with suitable chemical and jet of water pressure with pump and remove all the scale and foreign material deposited in side the coil followed with air pressure to sweep up all the particles and ensure thorough flow of air over the cooling coil , refixing of AHU filter after cleaning complete all as specified and directed. | 20 | Each Job | 1,000 ₹20,000 Lowest | 1,500 ₹30,000 | 3,000 ₹60,000 | 5,000 ₹1,00,000 | 2,000 ₹40,000 | 1,400 ₹28,000 |
| 2.00 | M&L for repairing/ servicing AHU Fan Motor of 5 HP/5.5 HP capacity, opening the motor, cutting & removing old and burnt winding wire, rewinding the motor with new super enameled copper winding of size & discription to match with existing including insulating materials, varnishing, drying, replacement of both driven end & non driven end bearings and base plate, reassembling, refixing in same position & connecting including testing and commissioning complete all as specified & directed:- | 5 | Each Job | 5,000 ₹25,000 | 6,000 ₹30,000 | 4,000 ₹20,000 | 3,000 ₹15,000 | 2,500 ₹12,500 Lowest | 7,200 ₹36,000 |
| 3.00 | Description all as item No. 2 above here in before but 7.5 HP Capacity | 2 | Each Job | 5,000 ₹10,000 | 6,000 ₹12,000 | 5,000 ₹10,000 | 4,000 ₹8,000 Lowest | 7,500 ₹15,000 | 8,500 ₹17,000 |
| 4.00 | Description all as item No. 2 above here in before but 10 HP Capacity | 2 | Each Job | 5,000 ₹10,000 Lowest | 6,000 ₹12,000 | 6,500 ₹13,000 | 5,000 ₹10,000 Lowest | 9,000 ₹18,000 | 10,000 ₹20,000 |
| 5.00 | Taking up or down 40 mm bore MS pipe from trenched/ wall surfaces or in any position complete all as specified and as directed. | 50 | RM | 10 ₹500 Lowest | 20 ₹1,000 | 10 ₹500 Lowest | 40 ₹2,000 | 15 ₹750 | 50 ₹2,500 |
| 6.00 | Description all as item No. 5 above here in before but 50 mm bore. | 40 | RM | 10 ₹400 Lowest | 20 ₹800 | 15 ₹600 | 50 ₹2,000 | 20 ₹800 | 50 ₹2,000 |
| 7.00 | Description all as item No. 5 above here in before but 65 mm bore. | 30 | RM | 10 ₹300 Lowest | 20 ₹600 | 20 ₹600 | 60 ₹1,800 | 20 ₹600 | 60 ₹1,800 |
| 8.00 | Description all as item No. 5 above here in before but 80 mm bore. | 40 | RM | 10 ₹400 Lowest | 20 ₹800 | 25 ₹1,000 | 70 ₹2,800 | 20 ₹800 | 65 ₹2,600 |
| 9.00 | Description all as item No. 5 above here in before but 100 mm bore. | 50 | RM | 10 ₹500 Lowest | 20 ₹1,000 | 30 ₹1,500 | 90 ₹4,500 | 20 ₹1,000 | 85 ₹4,250 |
| 10.00 | Description all as item No. 5 above here in before but 125 mm bore. | 30 | RM | 10 ₹300 Lowest | 20 ₹600 | 35 ₹1,050 | 110 ₹3,300 | 20 ₹600 | 100 ₹3,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
16 Oct 2025, 6:00 pmClosed
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
REPAIR/ REPLACEMENT OF UNSV SPARES OF COOLING TOWERS, AHUS, PUMPS AND REWINDING OF ITS MOTORS AND REPAIRING AND CONNECTED MISC E/M WORKS AT BHDC UNDER GE (EAST) DELHI CANTT-10
2025_MES_731495_1
GE/DE-97/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D/ Cat c (i)
9 documents required · 9 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹90,000
Yes
5 Jan 2026
18 Sept 2025
18 Oct 2025
18 Sept 2025
16 Oct 2025
2 Oct 2025
Amount
Taking out filter from AHU up to 1000 CFM to 16000 CFM or any capacity and cleanning of coil with suitable chemical and jet of water pressure with pump and remove all the scale and foreign material deposited in side the coil followed with air pressure to sweep up all the particles and ensure thorough flow of air over the cooling coil , refixing of AHU filter after cleaning complete all as specified and directed.
M&L for repairing/ servicing AHU Fan Motor of 5 HP/5.5 HP capacity, opening the motor, cutting & removing old and burnt winding wire, rewinding the motor with new super enameled copper winding of size & discription to match with existing including insulating materials, varnishing, drying, replacement of both driven end & non driven end bearings and base plate, reassembling, refixing in same position & connecting including testing and commissioning complete all as specified & directed:-
Description all as item No. 2 above here in before but 7.5 HP Capacity
Description all as item No. 2 above here in before but 10 HP Capacity
Taking up or down 40 mm bore MS pipe from trenched/ wall surfaces or in any position complete all as specified and as directed.
Description all as item No. 5 above here in before but 50 mm bore.
Description all as item No. 5 above here in before but 65 mm bore.
Description all as item No. 5 above here in before but 80 mm bore.
Description all as item No. 5 above here in before but 100 mm bore.
Description all as item No. 5 above here in before but 125 mm bore.
Description all as item No. 5 above here in before but 150 mm bore.
Supply and laying MS pipe for condenser water or cooling tower line of MS 'C' class 40 mm dia confirming to IS-1239 and IS- 3589 both revised till date as required and as specified and complete with bends, reducers tees, supports vibration, pipe supports, structures shall be painted with 2 coats of synthetic enamel paint over a coat of red oxide primer and complete all as specified & directed.
Description all as item No. 12 above here in before but 50 mm bore.
Description all as item No. 12 above here in before but 65 mm bore.
Description all as item No. 12 above here in before but 80 mm bore.
Description all as item No. 12 above here in before but 100 mm bore.
Description all as item No. 12 above here in before but 125 mm bore.
Description all as item No. 12 above here in before but 150 mm bore.
M&L for taking out Cooling Tower Motor of 3.0 HP capacity, opening the motor, cutting & removing old and burnt winding wire, rewinding the motor with new super enameled copper winding of size & discription to match with existing including insulating materials, varnishing, drying, replacement of both driven end & non driven end bearings and base plate, reassembling, refixing in same position & connecting including testing and commissioning complete all as specified & directed:-
Description all as item No. 19 above here in before but 5 HP Capacity.
Description all as item No. 19 above here in before but 7.5 HP Capacity.
Supply only, in replacement heating element capacity 3 KW, ISI marked and making electric connections and taking down old unserviceable heating elements, complete all as directed.
S&F in replacement Absolute HEPA filter of size 610x300x300mm having rated flow 1000 CFM, static pressure drop less than 25 mm of WG and efficiency more than 99.97 down to 0.3 micron, complete all as directed. Make - Thermadyne / Spectrum / Puromatic / Athlete
Supply & charge the refrigerent R - 407 Gas complete all as specified and directed. (Make:- Mafron/ Freon/ Floron)
Supply & charge the refrigerent R - 410 Gas complete all as specified and directed. (Make:- Mafron/ Freon/ Floron)
M&L for insulation of 40mm bore MS pipe with PUF slab 30 mm thick with applying bitumainous compound and GI cladding with 26 guage GI sheet etc cmplete including taking down existing PUF insulation all as specified and directed.
Description all as per item No 26 here-in-before but of pipe 50 mm bore.
Description all as per item No 26 here-in-before but of pipe 65 mm bore.
M&L for insulation of 80mm bore MS pipe with PUF slab 40 mm thick with applying bitumainous compound and GI cladding with 26 guage GI sheet etc cmplete including taking down existing PUF insulation all as specified and directed.
M & L for Painting of complete water cooled central AC plant / DX type AC plant of capacity 2x15 TR, including compressor, GI pipe lines, valve, pump sets, cooling tower, AHU pipe lines and chiller pipes etc complete all as specified and directed.
Description all as per item No 30 here-in-before but capacity 3x30 TR.
Description all as per item No 30 here-in-before but capacity 3x40 TR.
S&F in replacement of Butterfly Valve made out of Cast Iron, dia 150mm complete with all accessories with thermal insulation
Description all as per item No 33 here-in-before but of pipe 125 mm bore.
Description all as per item No 33 here-in-before but of pipe 100 mm bore.
Description all as per item No 33 here-in-before but of pipe 80 mm bore.
Description all as per item No 33 here-in-before but of pipe 65 mm bore.
Description all as per item No 33 here-in-before but of pipe 50 mm bore.
Description all as per item No 33 here-in-before but of pipe 40 mm bore.
S&F in replacement of Y-Strainers made out of Cast Iron, dia 65 mm complete with all accessories
Description all as per item No 40 here-in-before but of pipe 50 mm bore.
Description all as per item No 40 here-in-before but of pipe 40 mm bore.
Description all as per item No 40 here-in-before but of pipe 32 mm bore.
Description all as per item No 40 here-in-before but of pipe 25 mm bore.
S&F in replacement of 3 way modulating valves dia 80 mm for AHU complete with linkage modulating actuatator with all accessories complete in all respect as specified
Description all as per item No 45 here-in-before but of pipe 65 mm bore.
Description all as per item No 45 here-in-before but of pipe 50 mm bore.
Description all as per item No 45 here-in-before but of pipe 40 mm bore.
Description all as per item No 45 here-in-before but of pipe 32 mm bore.
Description all as per item No 45 here-in-before but of pipe 25 mm bore.
Supply only Air vent valves made out brass. 25mm dia Complete in all as specified and directed.
Supply only in replacment Pot stainer 150 mm dia Complete in all specified and directed.
Description all as per item No 52 here-in-before but 125 mm dia.
M&L for complete servicing of cooling tower of 180 TR/ 120 TR/ 90 TR / 40 TR AC plant installed at Base hospital including cleaning, descaling of PVC fills, applying the suitable chemical, removing all the deposited dust, foreign material, cleaning of filter and Checking electric connection of CT fan motor, sprinkler and PVC arms coating of FRP compound for filling of its tray joint and remove its leakage with testing, commissioning etc. complete all as specified and directed. Note:- The major parts to be replaced shall be measured and paid separately as supply only under respective item of this BoQ.
Supply only PVC fills 600 x 300 x 150 mm double folded complete all as specified and directed.
Supply only Fan assembly 1500 mm or 1800 mm complete all as specified and directed.
Supply only Sprinkler system complete all as specified and directed.
Supply only Tie Rod & Turn Buckle (04 Nos) complete all as specified and directed.
Supply only FRP Eliminator (04 Nos.) complete all as specified and directed.
Supply only PVC Eliminator (03 Nos.) complete all as specified and directed.
Supply only FRP (Fiber Reinforced Polymer) compound for basin repair complete all as specified and directed.
Modification in Air handling unit (AHU) in air conditioning system by supply, installation, and commissioning of SEMI -HYBRID HEPA class ( polarization based ) central air purification system using Filterless Magnetic Air Purification Process of different capacities inside AHU to improve the air quality by removing microbial, pollution inside the air combined with a high kill rate on airborne infectious diseases using Ultraviolet Germicidal Irradiation. The system shall be designed for providing protection from airborne infection and maintaining Indoor Air Quality in AHU unit with the following features and technical specifications.. The air purification system must be IS 17570:2021 : ISO16890:2016 certified in accordance to ASHRAE 52.2 2017 with valid test data by ASHRAE validated lab having in USA only. The system shall meet EUROVENT ePM 1.0 80% requirement and ASHRAE guideline for UV-C application for airborne infection inactivation. It should be a monobloc-structured unit specifically designed for integration in the Return Air path of units of all sizes, to centrally capture and kill germs. It shall be in grids of sizes 610x370x150mm (1000 CFM), and 610x680x150 mm (2000 CFM) to cover the full capacity (CFM) of the units.
M&L for insulation of 80mm bore MS pipe with PUF slab 100 mm thick with applying bitumainous compound and GI cladding with 26 guage GI sheet etc cmplete including taking down existing PUF insulation all as specified and directed.
Description all as per item No 63 here-in-before but of pipe125 mm bore.
Description all as per item No 63 here-in-before but of pipe 150 mm bore.
Saini Enterprises (BID ID -3446545)
SANJEEV ENTERPRISES (BID ID -3444092)
RUCHIKA ENGG.WORKS (BID ID -3447007)
SK ASSOCIATES (BID ID -3452752)
sony engineering works (BID ID -3446587)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .