Construction of New Hostel Building at RIRD in Krishnagiri Dam at Krishnagiri Block In Krishnagiri DT Under RIRD 2025-2026 Package No TN 04 KRI 266

Amount

Construction of New Hostel Building at RIRD in Krishnagiri Dam - Rs. 61.50 /- Lakhs

Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil as per SS20 B for foundation etc complete

Cement Concrete in 1 : 4 : 8 mix using 40 mm metal including cost and conveyance of all materials to site and labour charges etc complete

Brick work in cement Mortor 1:5 mix using second class Bricks of size 23 x 11.5 x 7.5 cms for the following including mixing mortar and all other labour charges etc complete.

Supplying and errecting shuttering including necessary support for plane surface including all R.C.C Works etc., Complete.ted 1 lit of water and strictly in accordance with the manufacturer's specification.

R.C.C. 1:1.5:3-using 20mm ISS HBGS metal including cost and conveyance of materials and labour charges etc. complete

Supplying, fabricating and placing in position inild steel or ribbed tor steel and all reinforced cement Concrete works as per the design given including cost of steel and binding wire in all floors etc complete complying with Standard

Paving the floor with coloured joint free virtified tiles of size 600x600x8mm of best quality and approved variety complying/conforming ISI specification land over cement mortar 1:3(one of cement and three of sand) 20 mm thick and pointed with same colour

Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete

Dadooing of walls with colour glazed tiles of size 300x200x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc complete.

Supplying and fixing of steel door size of 1.20x2.10m including all cost and labour charges etc., complete

Supplying and fixing of PVC door size of 0.75x2.10m including all cost and labour charges etc., complete

Supplying and fixing of Steel window size of 1.80x1.30m including all cost and labour charges etc., complete

Supplying and fixing of steel Ventilator size of 0.90x0.60m including all cost and labour charges etc., complete

Supplying and fixing of steel Gate & Window Grill size of following including all cost and labour charges etc., complete

Plastering with C. M 1:5 mix, 12 mm thick including cost and conveyance of all materials to site and labour charges etc complete.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Oil Distempering Two Coats over Plastering Surface including cost and conveyance of materials and labour charges etc complete

Exterior Emulsion Painting Two Coats with Approved Emulsion Paint over Cement Plastered surface including cost and conveyance of materials and labour charges etc complete.

Supply and fixing of Cuddapah slab including cost and conveyance of materials and labour charges etc complete.

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer

Provision for Water supply arrangements

2000 litre Sintex tank

32mm PVC pipe

32mm PVC Elbow

32mm PVC Tee

25mm PVC pipe

25mm PVC Elbow

25mm PVC Tee

SS Swan Neck Tap

Wash Basin

Provision for Sanitary arrangements

110mm PVC pipe

110mm PVC Bend

110mm PVC Tee

Provision for Rain water Harvesting pipe with specials (110mm PVC pipe)

Provision for Electrical arrangements

Light & Fan Point SD.no.24

Supply&Fixing of Tube Light SD.no.88

Supply & Fixing of Fan SD.no.107

Plug Point SD.no.12

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (SD No.125)

Service pipe SD.no.69

Service Connection SD.no.67

Service Charge to EB

Provision for Name board

Provision for Photograpic charges

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Alagesan Contractor (BID ID -1521794)