Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.8 LAccepted-AOC | L1 | Accepted-AOC BELOW RATE | |
| 2 | L2₹28.1 L+₹11.2 L (66.6%)Rejected-Finance | L2 | Rejected-Finance ABOVE RATE | |
| 3 | L3₹30.4 L+₹13.6 L (80.7%)Rejected-Finance | L3 | Rejected-Finance ABOVE RATE | |
| 4 | Not Admitted-PreQual/Technical | - | Not Admitted-PreQual/Technical Not Complied with technical specification |
Tender Value
₹24.5 L
EMD Value
₹49,500
Closing Date
22 Jul 2020, 6:00 pmClosed
EXECUTIVE ENGINEER
O/O EO MC BAHADURGARH
Construction of Toilet and Open Gym in Hoshiyar Singh Stadium, Railway Road Bahadurgarh
2020_HRY_134723_11
881 944 946 991 1054 1077 1176 1177 1180 1183 1184
Open Tender
Civil Works
Lump-sum
60 days
BAHADURGARH
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,000
EO MC BAHADURGARH
₹49,500
9 Sept 2020
8 Jul 2020
23 Jul 2020
8 Jul 2020
22 Jul 2020
8 Jul 2020
Amount
Earth filling under floors with earth brought from outside the campus irrespective lead and lift including laying in 15 cm layers including watering and consolidating complete in all respect and fully satisfaction of Engineer in charge (with an average lead of 10 km.)
SEATED CHEST PRESS All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing.Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter.The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage.Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters. Dimensions :86 X 26 X 71 in.
DIPS/CHIN UP/PUSH UPS All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions.Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm.Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant.All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters. Dimensions :56 X 48 X 84 in.
ROWING MACHINE All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters. Dimensions :43 X 35 X 43 in.
TWISTER/STAIR STEPPER All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters. Dimensions :39 X 31 X 55 in.
LEGPRESS All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters. Dimensions :90 X 20 X 75 in.
ARM WHEEL All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters. Dimensions :33 X 31 X 71 in.
HORSE RIDER STATION All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters. Dimensions :46 X 16 X 55 in.
ELLIPTICAL EXERCISER All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters. Dimensions :51 X 28 X 57 in.
DOUBLE CROSS WALKER All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters. Dimensions :59 X 26 X 65 in.
AIR SWING All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters. Dimensions :51 X 37 X 47 in.
EXERCISING BAR All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters. Dimensions :71 X 22 X 67 in.
AIR WALKER All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters. Dimensions :43 X 22 X 51 in.
MONKEY BAR Dimensions of Equipment 3277 x 1270 x 2261mm
Bidder Name
Amount
devender malik
M/s Signature Buildtech India
DEVENDER CONTRACTOR
M/s Signature Buildtech India
devender malik
M/s Signature Buildtech India
devender malik
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .