Devolpment of Mata Chintpurni Temple under Under Sawdesh Darshan 2.0 at Chintpurni Tehsil Amb Distt Una SH Building portion including water supply sanitary installation Septic tank Rain water Harvesting system Boundary wall site development and

Excavation work by mechanical means (hydraulic excavator)/ manual in all height and depths and in all kind of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rocks, chiseling/ wedging out of rock (where blasting is prohibited) and their intermediate classification of soil , setting out true to the required line, grades, width, cutting and trimming of side slopes as shown in the drawing and if water is met with in the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailling out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-In-Charge and disposal all surplus excavated soil in acquired width or at an approved dumping site including its stacking leveling dressing including all lead and lifts by head load, mechnical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HP PWD specification. Any loss to the public/ private property during the course of execution and disposal of unserviceble meterial shall be the absolute responsibility of the contractor which shall have to be compensated by him in all case. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Excavation work by mechanical means (hydraulic excavator)/ manual in foundation trenches or drains or overall areas in earth work of all kind of soil such as pick work, jumper work, blasting work, jumper blasting work soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting is prohibited, chiseling or any other mixed variety of soil, including shoring, strutting or bailing out water upto any depth or any height quantum of water including dewatering removal of slush and stacking the serviceable and unserviceable material clear from the edge of excavation and as per direction of Engineer-In-Charge and returning the stacked soil in 15 cm (Fifteen centimetre) layers, when required into plinths, side of foundation etcetera consolidating each deposited layer by ramming watering and then disposing of all excavated earth as directed by the Engineer-In-Charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables, etcetera including excavation for sockets, and dressing of sides, ramming of bottoms, upto any depth including getting out the excavated soil, then returning the soil as required, in layers not exceeding 20 cm (Twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etcetera and disposing of surplus materials/excavated soil as per specification, approved drawing, design, specification and as per the entire satisfaction of Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. .

Supplying and filling in plinth with sand under floors,including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying Rubble stone flooring laid in cement mortar 1:3 (One cement : three coarse sand), and pointing and fill the joints with cement mortar 1:3 (One cement : three coarse sand) including curing dressing complete as per specify design pattern and approved colour etcetera including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and Filling in plinth with hard stone under floors, including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (One cement : four sand : eight graded stone aggregate 40mm (Forty millimetre) nominal size) and curing complete excluding cost of form work in Retaining wall/return wall/ breast wall and foundation and plinth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:5:10 (One cement : five sand : ten graded stone aggregate 40mm (Forty millimetre) nominal size) and curing complete excluding cost of form work in Retaining wall/return wall/ breast wall and foundation and plinth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:3:6 (One cement : three sand : six graded stone aggregate 40mm (Forty millimetre) nominal size) and curing complete excluding cost of form work in Retaining wall/return wall/ breast wall and foundation and plinth complete complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20N/mm square (Twenty newton per square millimetre) with cement contents not not less than @ 320 Kilogram/Cubic metres (at the rate Three hundred twenty kilogram per Per Cubic metre) or as per approved design mix. All works upto plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government..

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty newton per square millimetre) with cement contents not not less than @ 360 kg/cum (at the rate Three hundered sixty kilogram per cubic metre) or as per approved design mix. All works upto and above plinth level upto all floor level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-30 (M-thirty) design mix to obtain the compressive strength of 30 N/mm square (Thirty Newton per square millimetre) for reinforced cement concrete work, using cement contents not less than @ 450 Per Kilogram/Per cubic Metre (four hundered fifty kilogram per cubic metre) or as per approved design mix for All works upto plinth level to give a smooth surfaces mechanically mixed and vibrated including curring complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-30 (M-thirty) design mix to obtain the compressive strength of 30 N/mm (Thirty Newton per square millimetre) for reinforced cement concrete work, using cement contents not less than @ 450 Per Kilogram/Per cubic Metre (four hundered fifty kilogram per cubic metre) or as per approved design mix for All works above plinth level to all floor level to give a smooth surfaces mechanically mixed and vibrated including curring complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing plinth protection with 50 mm (Fifty millimetres) thick interlocking paver blocks of M -30 (M-thirty) grade of NTC or its equivalent with 23cm (Twenty three centimetres) diametre Half round stone ware pipe for drainage purpose laid over 25cm (twenty five centimetres) thick cement concrete 1:4:8 (One cement : four sand : eight graded) stone aggregate bedding complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying 110mm (one hundered ten millimetre) diametre with working pressure not less than 4.5 Per Kilogram/cm2 (four point zero five kilogram per centimetre square) ISI marked PVC pipe weep holes in brick masonry/stone masonry, plain reinforced concrete, Abutments, Wing walls, Return walls and retaining/breast walls extended through the full width of the structure with slope I(V) : 20(H) (One vertical : Twenty Horizontal) towards draining face complete as per drawing and MORD technical specification section 700 and 1200 and as per direction of Engineer-In-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkhana, toll tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete or other similar works including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings balconies and access platform or other similar works for upto plinth and all floors level including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced and plain concrete work in stairs cases with slopping or stepped soffits, (excluding landing) except spiral staircase upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters buttresses, plinth and string courses, vertcal fins and other similar works complete upto plinth and all floors level including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillar, piers, abutments, post and struts square, rectangular, polygonal etcetera for upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera; with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels sides and soffits of beams haunchings, cantilevers, bressumers and lintels for upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced and plain concrete work in edges of slab and breaks in floors and walls any thickness for upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuutering, strutting and propping etcetera with wooden battens and ballies for all height/depths and removal of the same for in situ-reinforced concrete and plain concrete work in window sills, cornice and moulding and the like upto all floors level including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all height/depths and removal of the same for insitu-reinforced concrete and plain concrete work in weather shades, Chhajjas, corbels etcetera including edges including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all height/depths and removal of the same for insitu-reinforced concrete and plain concrete work in vertical fins and vertical sun breakers or other similar works including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and erection of Tor steel reinforcement Thermo Mechanically Treated bars of grade Fe-550D (five hundered fifty -D ) of Sail / TATA for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per approved specifications, drawing, design, as per entire satsfaction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing, fabrication and erection in position structural steel work of Tata / Sail / Reliance/Jindal Steel work welded in built up sections, in railling, brackets, gates, gratings framed guard bars, stringers, treads, landings etcetera of stair cases, including use of chequered plate and other similar works wherever required including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetera as required and works as per approved make all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing, fabrication and erection in position structural steel work of Tata / Sail / Reliance/Jindal riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing Stainless Steel 316 (three hundered sixteen) grade, 50 mm (Fifty millimetres) or 38 mm (Thirty eight millimetres) diametre SST (Stainless steel) pipe handrail fixed with 35mm (Thirty five millimetres) diametre stainless steel baluster, as per detail in combination of 35mm (Thirty five millimetres) and 15/20mm (Fifteen or twenty millimetres) diametre SST pipe baluster knock down railing of KICH or its equivalent hand rail fixed on 10x50mm (Ten into fifty millimetres) stainless steel flat balusters, (DESIGN CODE DT53-2-163) placed at 1200 mm (One thousand two hundered millimetres) centre to centre along with 3 nos (Three Numbers) @ 16 mm (Sixteen millimetres) mid rail connected at the side of the baluster with fixtures. The baluster would be fixed on the floor with casted base plate minimum 6mm (six millimetre) thick base plate shall be concealed with suitable Stainless Steel 316 (three hundered six) grade cover cap railing made of Hollow tubes, channels, plates etcetera, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etcetera, of required size, on the top of the floor or the side of waist slab with suitable arrangement complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing Stainless Steel 316 (three hundered sixteen) grade, 50mm (Fifty millimetres) diametre SST (Stainless steel) pipe of KICH or its equivalent handrail slip resistant in ramp at two level, 75cm (Seventy five centimetres) and 90cm (Ninety centimetres) height welded with 25mm (Twenty five millimetres) diametre Stainless steel hollow pipe balusters embedded in cement concrete 60cm (Sixty centimeters) centre to centre and jointing with electrical gas welding at top alongwith hand rail of hollow Stainless steel pipe of 50mm (Fifty millimetres) diametre. It should extend 30cm (Thirty centimetres) beyond top and bottom of the ramp complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing ornamental Cast Iron brackets, pole, railing, and other similar works and applying a priming coat of approved steel primer complete complete as per approved drawing , design and specifications as per approved drawing, design and specifications, including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing angle iron frames for doors, windows and ventilators of Tata / Sail / Reliance/Jindal hisar having mild steel channel sections of size 75x40x4mm (seventy five into forty into four millimetre) and Mild Steel angle 25x20x3mm (twenty five into twenty into three millimetre), joints mitred and welded by Mild Steel flat iron 40x12mm (forty into twelve millimetre) to the existing T- iron frame size 25x25x3mm (twenty five into twenty five into three millimetre), and Z-sections as per detail to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing Single rebate angle iron door,window,clerestory window frame manufactured from steel iron section of 40X40X5mm, (forty millimetre into forty millimetre into five millimetre) thickness including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50X25 mm (fifty millimetre into twenty five millimetre) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two point five millimetre) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pre-treatment of the surface etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing first class deodar wood work in frames of doors,windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required diametre and length , including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 65 x 100mm (sixty five into one hundered millimetre) factory made single extruded WPC (Wood Polymer Composite) solid doors/ windows / Celestory windows and other Frames / Chowkhat approved make of Alstone, Floresta, Ecoste, Century ply, comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with ful body threaded star headed SS screws having minimum frame density of 850 Kilogram/Per Cubic metre (Eight hundered fifty kilogram per Per Cubic metre), screw withdrawal strength of 2200N (Face) and 1100N (Edge), minimum compressive strength of 58N/mm2 (fifty eight newton per millimetre square), modulus of elasticity 900N/mm2 (Nine hundered newton per millimetre square), and resistance to spread of flame of CIass A category with property of being Termite / borer proof, water / moisture proof and Fire retardant and fixed in position with M.S hold fast / lugs / SS dash fasteners of required diametre and length including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators approved make Fenesta, Aluplast, Prominance, comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm (one decimal sixty millimetre plus minus zero decimal two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm (one hundered into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge. (Single/double glass panes shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (all series) frame 47 x 50 mm (forty seven into fifty millimetre) and mullion 47 x 68 mm (forty seven into sixty eight millimetre) both having wall thickness of 1.9 ± 0.2 mm (one decimal ninety millimetre plus minus zero decimal two millimetre) and single glazing bead of appropriate dimension including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing factory made uPVC white colour sliding glazed window approved make of Fenesta, Aluplast, Prominance, comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm (one decimal sixty millimetre plus minus zero decimal two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Kilogram (forty kilogram), G.I fasteners 100 x 8 mm (one hundered into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 52 x 44 mm (fifty two into forty four millimetre) and sash 32 x 60 mm (thirty two into sixty millimetre) both having wall thickness of 1.9 ± 0.2 mm (one decimal ninety millimetre plus minus zero decimal two millimetre) and single glazing bead of appropriate dimension including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing factory made uPVC white colour sliding glazed window approved make of Fenesta, Aluplast, Prominance, upto all height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm (one decimal sixty millimetre plus minus zero decimal two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Kilogram (forty kilogram), G.I fasteners 100 x 8 mm (one hundered into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge. Three track three panels sliding window with fly proof Stainless Steel wire mesh (Two numbers glazed and one no. wire mesh panels) made of (small series) frame 92 x 44 mm (ninety two into forty four millimetre) and sash 32 x 60 mm (thirty two into sixty millimetre) both having wall thickness of 1.9 ± 0.2 mm (one decimal ninety millimetre plus minus zero decimal two millimetre) and single glazing bead of appropriate dimension including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows approved make of Fenesta, Aluplast, Prominance, comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm (one decimal sixty millimetre plus minus zero decimal two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm (one hundered into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame and sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge. (Single / double glass panes shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window double panels with top fixed with Stainless Steel friction hinges 350 x 19 x 1.9 mm (three hundered fifity into nineteen into one decimal nine millimetre) made of (all series) frame 47 x 50 mm (forty seven into fifty millimetre), sash 47 x 68 mm (forty seven into sixty eight millimetre) and mullion 47 x 68 mm (forty seven into sixty eight millimetre) all having wall thickness of 1.9 ± 0.2 mm (one decimal ninety millimetre plus minus zero decimal two millimetre) and single glazing bead of appropriate dimension including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing factory made uPVC white colour sliding glazed door approved make of Fenesta, Aluplast, Prominance, comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm (one decimal sixty millimetre plus minus zero decimal two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 Kilogram (one hundered twenty kilogram), G.I fasteners 100 x 8 mm (one hundered into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge. (Single/ double glass panes, wire mesh shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Two track two panels sliding door made of (big series) frame 67 x 50 mm (sixty four into fifty millimtere) and sash 46 x 82 mm (forty six into eighty two millimetre) both having wall thickness of 2.3 ± 0.2 mm (Two decimal three millimetre plus minus zero decimal two millimetre) and single glazing bead / double glazing bead of appropriate dimension including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door approved make of Fenesta, Aluplast, Prominance, comprising of uPVC multi- hambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm (one decimal sixty millimetre plus minus zero decimal two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm (One hundered into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame and sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge. (Single / double glass panes shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm (sixty seven into sixty four millimetre) and sash 67 x 110 mm (sixty seven into one hundered ten millimetre) both having wall thickness of 2.3 ± 0.2 mm (Two decimal three millimetre plus minus zero decimal two millimetre) and single glazing bead / double glazing bead of appropriate dimension including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing factory made coloured powder coated/anodised aluminium work (wooden or other shades) for frame of doors, windows, ventilators and glazed partitions of Jindal / Hindalco / Kunal aluminium with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS:1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera (Section No. 14081 of Jindal / Hindalco etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing factory made coloured powder coated/ anodised aluminium work (wooden or other shades) for shutters of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of Jindal /Hindalco approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge (Glazing and panel fill to be paid for separately). For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 35mm (Thirty millimetre) thick both side commercial phenol bonded ISI Marked flush door shutter of CENTURY/ALPRO/ DURO PLY / GREEN PLY No.1S-2202 decorative type, core of block board construction to be finished with mica lamination of approved shade with frame of 1st (first) class hard wood and well matched ply veneering with vertical grain or cross bands and face veneering on both faces of shutters including black enameled Stainless steel butt hinges with necessary screws etcetera complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 35mm (Thirty millimetre) thick both side commercial phenol bonded ISI Marked vision panel flush door shutter of CENTURY/ALPRO/ DURO PLY / GREEN PLY No.1S-2202 decorative type, core of block board construction to be finished with mica lamination of approved shade with frame of 1st (first) class hard wood and well matched ply veneering with vertical grain or cross bands and face veneering on both faces of shutters with providing vision panel not exceeding 0.10 (zero point one zero) Per square metre in all type of flush including Stainless steel butt hinges with necessary screws etcetera complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 35mm (thirty five millimetre) thick factory made singIe extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter approved make of Alstone, Floresta, Ecoste, Century ply in required size comprising of virgin polymer of K value 58 (fifty Eight) to 60 (Sixty) (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 (twelve) for 100gms (hundered grams)) having minimum density of 850 Kilogram/Per Cubic metre (Eight hundered fifty kilogram per Cubic metre) and screw withdrawaI strength of 1800 N (Eighteen hundered newton) (Face) and 900 N (Nine hundered newton) (Edge), minimum compressive strength 50 N/mm2 (fifty newton per sqaure millimetre), modulus of elasticity 850 N/mm2 (eight hundered fifty newton per sqaure millimetre) and resistance to spread of flame of Class A category with property of being Termite or borer proof, water or moisture proof and Fire retardant. WPC to be laminated with PVC foil of minimum 14 (fourteen) microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk, S.S screws, complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Provid ing and tixing 18mm (Eighteen millimetre) thick factory made singIe extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board Iaminated with PVC foil of mininum 14 (fourteen) micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom or kitchen cabinet etc . of required sizes comprising of virgin polymer of K value 58 (fifty Eight) to 60 (Sixty) (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 750 Kilogram/Per Cubic metre (seven hundered fifty kilogram per Cubic metre) and screw withdrawaI strength of 1800 N (Eighteen hundered newton) (Face) and 900 N (Nine hundered newton) (Edge)), minimum compressive strength 50 N/mm2 (fifty hundered fifty newton per sqaure millimetre), modulus of elasticity 850 N/mm2 (eight hundered fifty newton per sqaure millimetre) and resistance to spread of flame of Class A category with property of being Termite or borer proof, water or moisture proof and Fire retardant. WPC to be laminated with PVC foil of minimum 14 (fourteen) microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunI‹ S.S screws, all as per direction of Engineer-In- Charge including carriage of material within all leads, lifts and other incidentals . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 50mm (Fifty millimetre) thick glazed fire resistant door shutters of 60 (sixty) minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm (One hundered millimetre) wide, bottom rail 200mm (Two hundered millimetre) wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2 (One hundered twenty grams per sqaure metre)) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etcetera, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing in fire resistant door shutters, fixed panels and partitions etcetera, with G.I. (galvanised Iron) beading made out of 1.6mm (One point Six millimetre) thick G.I. (galvanised Iron) sheet (zinc coating not less than 120gm/m² (One hundered twenty grams per sqaure metre)) of size 20 x 33mm (twenty into thirty three millimetre) screwed with M4 x 38 mm (M4 into Thirty Eight millimetre) Stainless Steel screws at distance 75 mm (Seventy five millimetre) from the edges and 150 mm c/c (One hundered fifty millimetre centre to centre), including applying a coat of approved fire resistant primer/powder coating of not less than 30 (thirty) micron on G.I. (galvanised Iron) beading, and special ceramic tape of 5 x 20 mm (Five into twenty millimetre) size etcetera complete in all respect as per NBC 2016, IS 16231 (Part 3) : 2016 and as per direction of Engineer-in-charge with glass of required thickness having 60 (Sixty) minutes of fire resistance both integrity and radiation control (EW60) and minimum 20 (twenty) minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW and EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100mm (Eleven hundered millimetre) wide into 2200mm (Two thousand Two hundered millimetre) height or 2.42 sqm (Two decimal four two square metre), including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Supplying and fixing rolling shutters of approved make made of 80mm x 1.25mm (Eighty into One point two five millimetre) M.S. Laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring shutters , as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimetre) thick Commercial Board water proof shutters with PGI sheet lining inside in SDB shutter including fixing with SS-304 (three hundered four) butt hinges with screws etcetera of Nova pan / Kit ply / National /Archidply / Action Tesa/ Green Ply complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 12 mm (twelve millimetre) thick frameless toughened glass door shutter of Modi Guard/Saint Gobain/AIS/Atul/Gold Plus including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etcetra for fixing required door fittings, complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 12 mm (twelve millimetre) thick frameless toughened glass partitions of Modi Guard/Saint Gobain/AIS/Atul/Gold Plus including all necessary fixing arrangement with Methylated spirit, SS, patch fitting and making required holes etcetra complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 8.0 mm (eight milimetre) thick toughened glass weight should not be less than 20.0 kg/ sqm (twenty kilogram per square metre) glazing of Modi Guard/Saint Gobain/AIS/Atul/Gold Plus in aluminium/uPVC/wood door, window, ventilator shutters and partitions etcetra complete with necessary screws, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 6.0 mm (six milimetre) thick toughened glass panes (weight not less than 15.00 Kilogram/ Square Metre) (Fifteen point zero zero kilogram per sqaure metre) Glass panes of Modi Guard/Saint Gobain/AIS/Atul/Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 6mm (Six millimetre) thickness float glass panes (weight not less than 15.0 Kilogram/ Square Metre) Fifteen point zero kilogram per sqaure metre) of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing Double Glass Unit, having 6mm (Six Millimetre) thick toughened inside and outside clear toughened glass hermetically sealed glazing of KT series or its equivalent with 10mm (Ten Millimetre) wide argon gas filled air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etcetera in aluminium windows, ventilators and partition etcetera with glass both side, as per specifications, drawings and direction of Engineer-in-charge complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 6mm (Six millimetre) thick froasted glass panes (weight not less than 15.0 Kilogram/ Square metre) (fifteen point zero kilogram per sqaure metre) Glass panes of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve milimetres) thick Phenol bonded (both Side ) prelaminated BWP grade particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 of Action Tesa / Century / Greenlam / Merinolam / Kitlam / Vista of approved shade Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetera complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing Fly proof stainless steel grade 304 (three hundered four) wire guage with 0.5mm (Zero point five millimetres) diametre wire and 1.4mm (One point four millimetres) wide aperture for doors windows and clerestory windows with necessary screws complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 8mm (Eight millimetre) thick anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved make (Hidalco/Jindal) and as per approved design/pattern,with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm (at the rate two hundered millimetre) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete at all levels including entire carriage of material upto all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-In-Charge.The rate is inclusive of octroi, royality, Malkhana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. (Mild steel) grills of require pattern in wooden/steel frames of windows etcetera with 12 x 6mm (Twelve into six millimetre)Mild Steel Flats in combination with 10 x 10 (Ten into Ten millimetre)mm square bars with round headed bolts and nuts or by screws complete all as per Drawing and Techanical Specifications including entire carriage of materials within all leads, lifts and other incidentals, as per approved and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheet (ISI Marked-Z 120) of Tata Durashine or its equivalent, in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) diametre with prepainted limpet and rubber washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing Multi Wall polycarbonate transparent or Skylight sheet 10mm (Ten millimetre) thick in roofing/flashing/ridges,valleys etcetera with necessary Galvanised screws, nuts, washer etcetera complete with all accessories as required as per approved make (Lexun, Duratuff, Suntuff (PalRam) in all shades like Clear transparent, Bronze, Grey, Gold, Aqua Green (Solar Olympic), Solar Ice, etcetera including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing factory made ridges or hips having proper gola shape 60 cm (Sixty centimetres) overall with 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheets of Tata Durashine or its equivalent in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) dia and prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing valley 90cm (Ninety centimetres) overall 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet of Tata Durashine or its equivalent steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetres) dia with prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing flushing 38cm (Thirty eight centimetre) overall with 0.60mm (Zero point six zero millimetre) thick prepainted sheet of Tata Durashine or its equivalent in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia meter and prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 0.80 mm (Zero decimal eight millimetre) thick with zinc coating not less than 275 gm/m² (two hundered seventy five millimetre gram per square millimetre), 30cm (thirty centimetre) wide and 25cm (twenty five centimetre) deep, 80cm (eight centimetre) overall semi-circular / finished U-shaped as per design / plain prepainted G.S sheet gutter of Tata Durashine or its equivalent with iron brackets 40x3mm (forty into three millimetre) size, bolts, nuts and washers etcetera, including proving and fixing dome shape grating and making necessary connections with rain water pipes complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing Mild Steel B.P. sheet 2.0mm (Two point zero millimetres) thick eaves board/facia/soffits/ceiling of Tata/ Sail/ Jindal hisar including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-Incharge (Base members of steel work shall be measured and paid separately) including fixing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 600x600x6mm (six hundered into six hundered into six millimetre) Aluminium Composite Panel ceiling of Alstone,Aludecor,Eurobond, Alstrong with pre-painted GI (galvanised iron)channel framing @ 600mm (at the rate six hundered millimetre) centre to centre with suitable screw complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm (five hundered ninety five into five hundered ninety five millimetre) of Gyproc, Armstrong, Everest as per approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (zero decimal five zero) (minimum) as per IS 8225:1987, Light reflectance of 85% (eighty five percent) (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 and 7), humidity resistance of 100% (hundered percent), thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level on the existing frame work consisting of T-sections and Lsections suitably fixed according to tile size complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 12.5mm (twelve decimal five millimetre thick Gypsum board false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (one hundered twenty grams per square metre) (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm (twenty five millimetre) wide x 1.6 mm (one deimal six millimetre) thick with flanges of 27 mm (twenty seven millimetre) and 37mm (thirty seven millimetre), at 1200 mm (one thousand two hundered millimetre) centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm (twelve decimal five millimetre diametre into fifty millimetre) long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm (twenty five into ten into zero decimal five zero millimetre) of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm (forty five into fifteen into zero decimal five millimetre) running at the spacing of 1200 mm (one thousand two hundered millimetre) centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm (twenty six millimetre) each having lips of 10.5 mm (ten decimal five millimetre), at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm (two decimal sixty four millimetre diametre into two hundered thirty millimetre) long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm (twenty seven millimetre) high having flanges of 20mm (tweny millimetre) and 30 mm (Thirty millimetre) long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm (five hundered fifty millimetre) centre, with 25mm (twenty five millimetre) long dry wall screws @ 230 mm (at the rate two hundered thirty millimetre) interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws. of size 3.5x25mm (Thre decimal five into twenty five millimetre) at 230mm c/c (at the rate two hundered thirty millimetre centre to centre), including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes , finishing with jointing compound in 3 (three) layers covering upto 150mm (one hundered fifty millimetre) on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings,grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing plaster of Paris (gypsumanhydrous) ceiling for all floor level in combination with 12mm (twelve millimetre) thick second deodar wood for all floor level, over hot dipped galvanized steel sections (galvanized @ 120 grams/Square metre (one hundered twenty grams per square metre), both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm ( twenty four into thirty eight millimetre) made from 0.30 (zero point three zero millimetre) mm thick (minimum) sheet on desired grid with 10mm (ten millimetre) gap in between and reinforced with rabbit wiremesh fixed to G.I. frame and forming 4x4mm (four into four millimetre) uniform groove complete as per architectural drawings and approved pattern including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing plaster of Paris (gypsumanhydrous) ceiling for all floor level, overover hot dipped galvanized steel sections (galvanized @ 120 grams/Square metre (one hundered twenty grams per square metre), both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm ( twenty four into thirty eight millimetre) made from 0.30 (zero point three zero millimetre) mm thick (minimum) sheet on desired grid with 10mm (ten millimetre) gap in between and reinforced with rabbit wiremesh fixed to G.I. frame complete as per architectural drawings and approved pattern including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) thick mineral fibre false ceiling tiles at all heights of size 600x600mm (Six hundered into Six hundered millimetre) of approved texture, design and pattern with wood wool backing and Rai wood border The tiles should have Humidity Resistance (RH) of 99% (Ninety nine percent), Light Reflectance > 85% (Eighty five percent), Thermal Conductivity k = 0.052 - 0.057 w/m K (zero point zero five two - zero point zero five seven) , Fire Performance as per (BS 476 pt - 6 and 7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm (Zero point Three Three millimetre) thick (galvanized @120 gsm) (at the rate One hundered twenty grams per square metre) comprising of main T-runners of 15x32mm (Fifteen into thrity two millimetre) of length 3000 mm, (Three thousand millimetre) cross-T of size 15x32mm (Fifteen into thrity two millimetre) of length 1200 mm (One thousand two hundred millimetre) and secondary intermediate cross T of size 15x32 mm (Fifteen into thrity two millimetre) of length 600 mm ( six hundred millimetre) to form grid module of size 600x600 mm (Six hundered into Six hundered millimetre) suspended from ceiling using galvanized mild steel item (galvanised @ 80gsm) (At the rate Eighty grams per square metre ) 50mm (Fifty millimetre) long 8 mm (Eight millimetre) outer diameter M-6 (M-Six) dash fasteners, 6 mm (Six millimetre) diameter fully threaded hanger rod up to 1000 mm (One thousand millimetre) length and L-shape level adjuster of size 85x25x2 mm, (Eighty five onto twenty five into Two millimetre) spaced at 1200 mm (One thousand two hundered millimetre) centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size 24x24x3000 mm (Twenty four into Twenty four into Three Thousand millimetre) made of 0.40 mm (Zero point four zero millimetre) thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm (Four hundered fifty millimetre) centre to centre and 40 mm (Forty millimetre) long dry wall stainless steel screws complete. The exposed bottom portion of all Tsections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights.complete including curing complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including :- (a) Structural analysis and design and preparation of building drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b)Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 6mm (Six millimetre) thick aluminium composite panel material consisting of 3mm (three millimetre) thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm (zero point five millimetre) thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 (five hundered) based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 (one) and polymer (Service) coating on face # 2 (two)as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 (Six thousand five) T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, Stainless Steel 316 (three hundered sixteen) Pins and anchor bolts of approved make in Stainless Steel 316 (three hundered sixteen), Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material and labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP (Aluminium composite panel) cladding is payable under the relevant aluminium items The Contractor shall provide curtain wall with Aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm up to two decimal places, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 50mm (fifty millimetre) thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3 (Twenty four kilogram per cubic metre), 50mm thick, wrapped in 200 G (two hundered grams) Virgin Polythene Bags fixed to wall with screw, rawel plug and washers and held in position by criss crossing Galvanised Iron (GI) wire etcetra complete in all respect including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 50mm (fifty millimetre) thick thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3 (Forty kilogram per cubic metre), wrapped in 200 G (two hundered grams) Virgin Polythene Bags fixed to wall with screw, rawel plug and washers and held and in position by criss cossing Galvanised Iron (GI) wire etcetra complete in all respect including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and construction of 30cm (thirty centimetre) thick Cavity wall second class common burnt clay building bricks with 7cm (Seven centimetre) in wide cavity and consisting 11.5 cm ( Eleven decimal five centimetre) thick inner and outer wall laid in Cement mortar 1:4 (One cement : four sand) and strength with hoop iron and bituminious coated cross ties including making weep hole and vent pipe complete 2 Nos. (two numbers ) 6/8 ( six oblique eight ) width brass in Z- shape crossing each other shall be provided at the interval 90-100 cm ( ninety to hundered centimetre) length horizontal and vertical in cavity wall and curing complete (The mesurement of wall faces only one side will be considered for payment) complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and construction of brick work using Second class common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement : Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and construction of half brick masonary with second class common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in superstructure above plinth up to all floor level in cement mortar 1:4 (One cement : four sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and construction of second class half brick masonary for shaft with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to all floor levels in Cement Mortar 1:4 (one cement: four course sand) and strength with hoop iron and bituminious coated cross ties including making weep hole and vent pipe complete 2 Nos. (two number ) 6/8 ( six / eight ) width brass in Z- shape crossing each other shall be provided at the interval 90-100cm (ninety to hundred centimetre) length horizontal and vertical in cavity wall and curing complete). The measurement of wall faces only one side will be considered for payment), complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and construction of random rubble masonry with hard stone in foundation, plinth, retaining or returning/breast walls and other similar works including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate 20 mm (twenty millimetre) nominal size) upto plinth level with Cement mortar 1:6 (one cement : six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and plastering 20mm (twenty millimtere) lime surkhi plaster in two coats backing coat 10mm thick with 1:1:1(1 lime:1 surkhi:1 sand) mortar and finishing coat 10 mm thick with 1:2 (One lime : two sand) mortar on fair side of brick/stone masonry wall for interior plastering above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement : six sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in two coat on rough side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement : six sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and plastering 6mm (Six millimetres) thick cement plaster to ceiling in cement mortar 1:3 (One cement : three sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth with cement mortar 1:5 (One cement : five sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:3 (One cement : three sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and plastering 12mm (twelve millimetre) thick and 100mm (One hundered millimetre) wide plain cement mortar bands in cement mortar 1:4 (one cement : four fine sand) surface of brick/concrete/ stone walls for exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying 600x 600mm (Six hundered into six hundered millimetre), 10mm (ten millimetre thick) Double Charge / Ultra Charge vetrified tiles of Kajaria / NITCO / Somany / Simpolo/ Johnson with water absorption less than 0.08% (zero decimal zero eight percent) and conforming to IS: 15622, of approved shade and design, in flooring laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement : four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying 600x 600mm (Six hundered into six hundered millimetre), 10mm (ten millimetre thick)Double Charge / Ultra Charge Vitrified tiles of Kajaria / NITCO / Somany / Simpolo/ Johnson as per approved shade and design, with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement : Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram Per square metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying (200x1200x10)mm (Two hundered into Twelve hundered into ten millimetres) full body /full body anti skid vitrified tile planks with water absorption less than 0.5% (Zero point five percent) and conforming to IS: 15622 of approved make Nitco /Kajaria / Simpolo /Johnson / Somany in all colours and shades in flooring or other similar location etc., laid on 20mm (twenty millimetre) thick base of cement mortar 1:4 (One cement : four coarse sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etcetera complete in all respect including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying (200x1200x10)mm (Two hundered into Twelve hundered into ten millimetres) full body /full body anti skid vitrified tile planks of Nitco /Kajaria / Simpolo /Johnson / Somany as per approved shade and design of the office and thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement : Three coarse sand) jointing with grey cement slurry @ 3.3 Kilogram/ Square metre (Three point three kilogram per suare metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 300x300 mm (Three hundered into Three hundered millimetre) with 10mm (ten millimetre) thick first quality acid and alkali resistant tiles of Kajaria / NITCO / Somany / Simpolo/ Johnson and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 300x300 mm (Three hundered into Three hundered millimetre) with 10mm (ten millimetre) thick first quality acid and alkali resistant wall tiles of Kajaria / NITCO / Somany / Simpolo/ Johnson conforming to IS: 15622 , in all colours, shades except burgundy, bottle green, black in skirting, riser of steps, over 12 mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement : Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram Per square metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 400 x 400mm (Four hundered into Four hundered millimetres) with 10mm (ten millimetre) thickness of first quality antiskid full body vitrified floor tiles of Nitco /Kajaria / Simpolo /Johnson / Somany conforming to IS : 15622 of approved shade and design, laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement : four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 300x450mm (Three hundered into four hundered fifty millimetres) into 10mm (ten millimetre) thick Ceramic Glazed tiles of Nitco /Kajaria / Simpolo /Johnson / Somany in skirting risers of steps and dados with cement mortar 1:3 (One cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying (600x1200x10)mm (Six hundered into Twelve hundered into ten millimetres) vitrified tiles with glossy finish of Nitco /Kajaria (Eternity)/ Simpolo /Johnson / Somany as per approved shade and design of the office and thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement : Three coarse sand) jointing with grey cement slurry @ 3.3 Kilogram/ Square metre (Three point three kilogram per suare metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 300 x 600mm (Three hundered into Six hundered millimetres) with 10mm (ten millimetre) first quality glazed wall tiles, conforming to IS: 15622 , of approved make Nitco /Kajaria / Simpolo /Johnson / Somany in all colours, shades as approved by Engineer In Charge, in skirting, risers of steps and dados, over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement : three coarse sand) and jointing with grey cement slurry @ 3.3Kilogram per Square Metre,(at the rate three point three kilogram per square metre), including pointing in white cement mixed with pigment of matching shade complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying mirror polished 25mm (Twenty five millimetre) thick Kota stone minimum Size 55x55cm (Fifty five into Fifty five centimetre) of uniform colour with 15cm (Fifteen centimetre) wide Jaisalmer Yellow marble band of same shade that of flooring of approved shade as per detail slab flooring over 20 mm (twenty millimetre) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (One cement : Four coarse sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying Kota stone slabs 25mm (Twenty five millimetre) thick in risers of steps, skirting, dado and pillars laid on 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement : Three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimetre) thick white makrana marble work (Table rubbed and polished) having 7.5 cm (Seven decimal five centimetre) wide strip band of yellow jaisalmer stone in flooring on 20mm (Twenty millimetre) thick base in cement mortar 1:4 (One cement : four sand) including jointing with cement mortar 1:2 (One white cement : two marble dust) with an admixure of pigment to match the shade of the marble including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimetre) thick white makrana marble work for wall lining (veneer work) including dado, skirting, risers of steps etcetera, in required design and pattern wherever required, stones of different finished surface texture, on 12-15 mm (average) thick cement adhesive 1:1 (One cement : one adhesive) laid and screwed in position and jointed with white cement slurry @ 3.3kg/sqm (at the rate three point three kilogram Per square metre) including pointing with white cement slurry admixed with pigment of matching shade, including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 19 mm (Nineteen millimetre) thick Sadar Ali / Red lakha Granite in combination with 15cm (fifteen centimetre) wide black granite band and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings over 20 mm (Twenty millimetre) thick base cement mortar 1:4 (One cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera apto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying 19 mm (nineteen millimetre) thick Sadar Ali / Red lakha / black granite gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 19 mm (nineteen millimetre) thick Sadar Ali / Red lakha / black of required shade Granite stone in combination 80% (eighty percent) polished and 20% (twenty percent) unpolished slab with 50mm (fifty millimetre) wide flaming band near uniform double round nosing gang saw cut, mirror polished, premoulded and prepolished, machine cut for tread of steps and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 19 mm (nineteen millimetre) thick Sadar Ali / Red lakha / black / grey in risers of steps, skirting dado and pillars laid on with special adhesive over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement isyo three coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 40mm (forty centimetre) wide 20 mm (twenty millimetre) thick marble stone strip moulding above panneling work/ tile work/ other similar work, including machine polishing to edge to give high gloss finish etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing at all height wall panelling with 8mm (Eight millimetre) water proof/termite resistant teak ply conforming to IS:13958-1994 including fixing to frame work made of 50mm x 50mm (fifty millimetre into fifty millimetre) on 600mm (six hundered millimetre) centre to centre with hard wood frame including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing first class teak wood moulded cornice 55 x 30mm (fifty five into thirty milimetre) and 25x12 mm (twenty five into twelve millimetre) beading of triangular shape to the junction of panelling etcetera with iron screws all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 4mm (Four millimetre) one side decorative veneer of CENTURY/ALPRO/ DURO PLY / GREEN PLY, conforming to IS: 1328 (type-1), for plain lining or cladding on wall panneling, wooden ceiling or other similar places, including cost of adhesive of approved quality including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 200x1200 mm (two hundered into twelve hundered milliemtre) wall panelling with prelaminated wooden planks conforming to IS:13958-1994 including providing and fixing to frame work made of 50mm x 50mm (fifty millimetre into fifty millimetre) hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etcetra with iron screws all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 50 mm (Fifty millimetres) thick cement concrete flooring 1:2:4 (One cement : two sand into four graded stone aggregate 20mm (Twenty millimetres) nominal size) laid in one layer finished with a floating coat of neat cement complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying 40mm (forty millimetre) thick Red Mandana Sand stone slab in flooring and treads of steps on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including preparing of nosing, complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 40mm (forty millimetre) thick Red Mandana Sand stone slab in skirting and risers of steps on a bed of 20mm thick cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab rubbing and finishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 300x300mm (Three hundered into Three hundered millimetre) with 12mm (Twelve millimetre) thickness exterior grade tactile tile (for vision impaired persons as per standards) of having water absorption less than 0.5% (Zero point five percent) of Kajaria /Johnson or its equivalent in all colours and shades, in outdoor floors such as footpath, court yard, multimodals location, ramp area or other similar locations, conforming to IS : 15622, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (One cement : four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Heat Resistant Terrace Tiles 300mmx300mmx20mm (Three hundered millimetre into Three hundered millimetre) into (Twenty millimetre) thick with SRI (solar refractive index) > 78 (Sevety Eight) , solar reflection > 0.70 (Zero point Seventy) and initial emittance>0.75 (Zero point Seventy Five) on waterproof and sloped surface of terrace, on 20mm (Twenty millimetre) thick bed of cement mortar 1:4 (One cement : four coarse sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1 (one cement : one course sand) , including rubbing and polishing of the surface upto 3 (Three) cuts complete, including providing skirting upto 150mm (One hundred fifty millimetre) height along the parapet walls in the same manner including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 25mm (twenty millimetre) thick machine cut Red Mandana Sand stone work for wall in dado, skirting, risers of steps etcetera, in required design and pattern wherever required, stones of different finished surface texture, on 15 mm (fifteen millimetre) thick cement adhesive 1:1 (one cement : one adhesive) laid and screwed and clamping in position and jointed with white cement slurry @ 3.3 kg/sqm (at the rate three point three kilogram per square metre) including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing (100 x 100) mm (One hundered into one hundered millimetre) factory made red sand stone designer pillar or pier for railing with carving upto desirable hieghts complete as per techanical specifications including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing factory made red sand stone designer pillars of square, rectangular, polygon, circular or other geometrical shapes and all sizes with carving upto all heights including scaffolding, struting, centering etcetera complete as per techanical specifications including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 50mm (fifty millimetre) thick factory made vernacular and temple traditional designer arch of red sand stone in all sizes with making round edges including scaffolding, struting, centering etcetera complete as per techanical specifications including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 50mm (fifty millimetre) thick factory made artistic and h: ric monuments (Mata Chintpurni Sculpture, Himachali traditions or other Lords Sculpture) wall panels of red sand stone by grooving and making raised and scupltures and borders by chiesseling in one peice of stone in all sizes including scaffolding, struting, centering etcetera complete as per techanical specifications including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 12mm (twelve millimetre) thick Un: ne / NTC / Atlantic stone cladding on wall surface with 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement : three sand) and jointed with cement slurry to match the stone including scaffolding complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying 20mm (twenty millimtere) thick teraacotta pressed clay tiles (as per approved pattern of approved size) approved make of taylor or its equivalent on roofs jointed with cement mortar 1:4 (One cement : four coarse sand) mixed with 2 (two) integral waterproofing compound, laid over a bed of 20mm (twenty millimtere) thick cement mortar 1:4 (One cement : four coarse sand) and finished neat complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 760 x 760mm (Seven Hundered Sixty into Seven Hundered Sixty) with 50mm (fifty millimetre) thickness of precast factory made glass reinforced concrete Jali panels of approve size. Pattern, design, thickness and colour of NTC make or its equivalnent. the panels should be make from 53 (fifty three) grade of white Portland cement manufactured by "JK cement" or its equivalent Quartz, Fine Silica, Sand, alkali resistant Glass fiber manufactured by 'Ownes corning' or its equivalent, Super Plasticizers manufactured by 'BASF' or its equivalent Polymers manufactured by 'BASF'or its equivalent and UV resistant synthetic inorganic pigments should be used for pigmentation manufactured by 'BAYFERROX (Germany) or its equivalent.The material casting should take place in FRP Mould.The fixing of Screen should be 'DRy fixing' such that to be done with stainless steel (SS-304) 'L' shaped brackets, fasteners and pins complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 50mm (fifty millimetre) thick factory made red sand stone Jali panels making by water jet or CNC cutting moulding machine of approve size, Pattern, design, thickness and colour to be done with stainless steel (SS-304) 'L' shaped brackets, fasteners and pins with necessary scaffolding, struting, centering etcetera complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and applying Birla / J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface upto floor all level complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and painting Wall painting (two coats) with Premium acrylic emulsion of Asian / Dulux /Berger paints/Nerolac paints) for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and painting two coats wall painting with Plastic emulsion paint of Asian / Dulux /Berger paints/Nerolac paints) for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and painting two coats with silicon and acrylic emulsion of Asian / Dulux /Berger paints/Nerolac paints for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and painting (two or more coats) with acrylic washable emulsion of Asian paints / Berger paints/ Dulux paints/Nerolac paints (above Dado/skirting) of approved shade for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic,/special pigment siliceous aggregate anti fungicides anti-rusting and foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and applying distempering with oil bound washable distemper of Nerolac/ Asian Paints to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer Priming coat with distemper primer complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and painting walls with weather proof exterior emulsion of Nerolac/Asian or its equivalent of approved shade having VOC less than 50 gm/litre (Fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade with silicon additives New work (Two or more coats applied @ 1.43 litre/ 10 Square metre (One point forty three litre per ten square metre) over and including priming coat of exterior primer applied @ 0.90 litre/10 Square metre (Zero point ninety litre per ten square metre) upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and finishing surface with Epoxy paint (two or more coats) on steel work at all locations prepared and applied as per manufacturer's specifications including preparation of surface, etcetera complete as per approved brand (Berger Shalimar, Asian paints, ICI Nerolac) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and painting with oil type wood preservative of (Berger Shalimar, Asian paints, ICI Nerolac) for new wood work by applying two or more coats, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting etcetera complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matters sand papering and knotting of readymixed paint brushing with white lead for priming of Burger, Shalimar, Asian paints, ICI Nerolac complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stopping including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying Damp Proof Course 50mm (fifty millimetre) thick with cement concrete 1:2:4 (one cement : two sand : four graded/crushed stone aggregate) 20mm (Twenty millimetre nominal size) and curing complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and applying a coat of residual petroleum bitumen of grade of VG-10 (Viscosity grade-Ten) of approved quality using 1.7 Kilogram/Square metre (One point seven kilogram per square metre) on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil etcetera complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: i) Ist course of applying cement slurry @ 4.4 (four point four) Kilogram/Square metre mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20 mm cement plaster 1:3 (One cement : three coarse sand) mixedwith water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 (one point seven) Kilogram.per Square metre of area. iv) IVth course of 400 (four hundered) micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100mm (one hundered millimetre) wide and pasted to Each other with bitumen @ 1.7 (one point seven) Kilogram/Square metre. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying Dr. Fixit Torch Shield (P-3160-3mm), APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm (three millimetre) thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/Per Square Metre (at the rate zero point fourty litre per square metre) by the same membrane manufactured of density at 25°C, 0.87 - 0.89 Per Kilogram/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etcetera, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm (five centimetre) . Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM,D -5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and treatment of soil under proposed floors in proportion of dilute compound by using 1.0 (one) litre water @ 2.5 (two point five) millilitre chemical emulsion (Imidacloerid 30.5% SC) and using diluted compound @ one litre per hole, 300 mm (three hundered millimetre) and laying of PVC pipes condiuts of approved make (Termi Pores/ Irrigate Pores) apart including drilling 12 mm (twelve millimetre) diameter holes and plugging with cement mortar 1:2 (one cement : two Coarse sand) to match the floor: The laying of material shall be got done through the authorised applicator of the manufacturer of material including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimetre) thick Commercial Board waterproof termite resistant shutters for cup boards including fixing with SS 304 grade hinges with screws etcetera and finished with 25x6mm (twenty five into six millimetre) hard wood lipping / edging complete of Nova pan / Kit ply / National / Archidply / Action Tesa / Green Ply including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimetre) thick panelled or panelled and glazed shutters of commercial Board waterproof termite resistant shutters for cup boards including fixing of 4.0mm (Four point zero millimetre) thick float glass with beading and stainless steel butt hinges with screws etc. and finished with 25x6mm (twenty five into six millimetre) hard wood lipping / edging complete of Nova pan / Kit ply / National / Archidply / Action Tesa / Green Ply including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm (fifteen millimetre) thick Commercial board waterproof termite resistant proof shutters for cup boards and finishing the edges with 19x6mm (fifteen millimetre into six millimetre) hardwood beading including fixing with SS piano hinges with screws etcetera complete of Nova pan / Kit ply / National / Archidply / Action Tesa / Green Ply including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing complete box with 19mm (Nineteen millimetre) thick shelves and internal partition shall be made of 19 mm (Nineteen millimetre) thick waterproof termite resistant commercial board with butt joints and fixing with nails and screws etc. and back side of cup board shall have 8mm (eight millimetre) thick waterproof ply. The shutters from all side also have 6 mm (six millimetre) thick hard wood edges / lipping all round been mix fnished both side with 1 mm (one millimetre) thick lemination complete of Nova pan / Kit ply / National / Archidply / Action Tesa / Green Ply including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimetre) thick water proof termite resistant commercial board in shelves/box for cup board with butt joints and fixing with nails and screws etcetera complete of Nova pan / Kit ply / National / Archidply / Action Tesa / Green Ply including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing water proof 8 mm (eight millimetre) thick of standard quality ISI mark and approved shade and colour in panelling and wall linning including mitring at junctions, butt jointing and nails complete including frame work of 50x50mm (fifty into fifty millimetre) hard wood grid frame work at 600 mm C/C (six hundered millimetre centre to centre) of paneling, complete of Nova pan / Kit ply / National / Archidply / Action Tesa / Green Ply including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 1.00mm (one millimetre) thick colored and decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 1st (first) class deodar wood plain square edged cover fillets (beading) 50mmx25mm (fifty millimetre into twenty five millimetre) section, with wood screws in ceiling and lining including mitring at junction including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminum U beading 2.5mm (one point five millimetre) thick of required size to Pre-laminated/ flush door shutter, including fixing etcetera wherever necessary complete, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20 mm (twenty millimetre) diameter stainless steel curtain rods of wall thickness 1.25 mm (one point two five millimetre) with two brass brackets fixed with brass screws and wooden plugs etcetera wherever necessary complete, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing concealed hinges for windows / Ventilators/ all other works of approved quality for 20mm (twenty millimetre) thick for door with stainless steel screws complete, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 125mm (one hundered twenty five millimetre) bright finished brass double acting spring hinges with necessary brass screws etcetera complete, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 125x75x4 mm (one hundered twenty five into seventy five into four millimetre) ISI marked CED coated sellf closing hinges fitting with as per required colour or shade with necessary SS 304 grade screws etcetera complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing steel (white power coated) crescent lock for uPVC/aluminium sliding window/ door with necessary screws etcetra complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and filling the gap Upto 5mm (five millimetre) depth and 5 mm (five millimetre) width in between aluminium / uPVC frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundered into Sixteen millimetres) nominal size bright/matt finished Stainless steel sliding door bolts ISI marked or approved quality and make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 250x16mm (Two hundered fifty into Sixteen millimetres) nominal size bright/matt finished Stainless steel sliding door bolts ISI marked or approved quality and make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 250x10mm (Two hundered fifty into Ten millimetres) nominal size bright/matt finished Stainless steel Tower bolts (barrel type), ISI marked or approved quality and make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 100x10mm (One hundered into Ten millimetres) nominal size bright/matt finished Stainless steel Tower bolts (barrel type), ISI marked or approved quality and make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 100x16mm (one hundered into Sixteen millimetres) nominal size aluminium sliding door bolts ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 250x16mm (two hundered fifty into Sixteen millimetres) nominal size aluminium sliding door bolts ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 300x16mm (three hundred into sixteen millimeters) ISI marked oxidised M.S. sliding door bolts conforming to IS:5930 with screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.

Providing and fixing 150x16mm (One hundred fifty into sixteen millimeters) ISI marked oxidised M.S. door sliding door bolts conforming to IS:5930 with screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.

Providing and fixing aluminium 200x10mm (two hundered into Ten millimetres) nominal size Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium 150x10mm (One hundered fifty into Ten millimetres) nominal size Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 150x10mm (One hundered fifty into Ten millimetres) nominal size oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 100x10mm (One hundered into Ten millimetres) nominal size oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing bright finished brass 100 mm (one hundered millimetre) mortice latch and lock with 6 (six) levers and a pair of lever handles of approved quality with necessary screws complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 65x35mm (Sixty five into Thirty five millimetres) size special quality chromium plated brass cup board lock with six levers including necessary screws etcetera complete (Indian make approved quality) including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing double strip (horizontal type) 150mm (one hundered fifty millimetre) size Cup-board shutter magnetic catcher with necessary screws etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing powder coated telescopic drawer channels 450 mm (four hundered fifty millimetre) long with necessary screws etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing sliding arrangement in racks / cupboards / cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) complete as per architectural drawings specifications, design and as per the directions of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 125x34x24 mm (one hundered twenty five into thirty four into twnety four millimetre) weighing not less than 23 gms (twenty three grams) of bright finished PTMT handles with screws complete as per architectural drawings specifications, design and as per the directions of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 300mm (three hundered millimetre) long bright /matt finished Stainless Steel 304 Grade 22mm (twenty two millimetre) diameter H-handles of approved quality and make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing bright /matt finished Stainless Steel 304 Grade 125mm (one hundered twenty five millimetre of approved quality and make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (One hundered fifty millimetres) nominal size aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundered millimetres) nominal size aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 125mm (One hundered twenty five millimetres) nominal size M.S. Handles ISI marked with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundered millimetres) nominal size M.S. Handles ISI marked with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium hanging floor Twin door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium hanging floor Single door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 250mm (two hundered fifty millimetres) nominal size aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (One hundered fifty millimetres) nominal size aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 Per Kilogram (one hundered twenty five kilogram), for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 Per Kilogram to 80 Per Kilogram (thirty six kilogram to eighty kilogram) and door width from 701 mm to 1000 mm (seven hundered one millimetre to one thousand millimetre), with double speed adjustment with necessary accessories and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing of expansion joint, floor Joint of 40 mm (forty millimetre) gap, system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical location in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s preengineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures complete, (Material shall confirm to ASTM 6063). including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing sheet covering over expansion joints with iron screws as per design, Aluminium fluted strips 3.15 mm (three point one five millimetre) thick, 150 mm (one hundered fifty millimetre) wide including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (One hundered fifty millimetres) diametre on wall face PVC rain water pipes of working pressure 4/6 Per Kilogram/cm2 (Four/six kilograms/per centimeters square) ISI marked of Finolex / Vectus including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (One hundered fifty millimetres) nominal bore/diameter Plain bend ISI marked of Finolex / Vectus including fixing with approved adhesive complete. including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (One hundered fifty millimetres) diametre Shoe on wall face PVC rain water pipes working pressure 4/6 K.g/cm2 (Four/six kilogram/per centimetres square) ISI marked of Finolex / /Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (One hundered fifty millimetre) diametre PVC clamps ISI marked of Finolex / Vectus approved design to PVC rain water pipe including cost of cutting holes and steel screws, rawal plug and making good the walls etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing in position collapsible steel shutters of with vertical channels 20x10x2mm (twenty into ten into two millimetre) and braced with flat iron diagonals 20x5mm (twenty into five millimetre) size, with top and bottom rail of T-iron 40x40x6mm (forty into forty into six millimetre), with 40mm (forty millimetre) diametre steel pulleys, complete with bolts,nuts, locking arrangement, stoppers, handles, including applying apriming coat of approved steel primer including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying 80mm (eighty millimetre) thick faciory made cement concrete interlocking paver block of M-40 M-forty) grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over and including 50mm (fifty millimetre) thick compacted bed of coarse sand, filling the joints with fine sand etcetera all complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Consolidation of sub grade with Road Roller 8-10 (eight - ten) Tonne, including making good the undulation etcetera with earth or quarry soil etcetera and rerolling the sub-grade completed as per HP.PWD specifications including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and construction of granular sub-base 150mm (one hundered fifty milimeters) compacted thickness by providing well graded materials as per table 400.1 spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel roller 80-100 (Eighty-hundred) kN static roller to achieve the desired density, complete as per MORD Technical Specification section 400 for grading-I material, including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing, laying, spreading and compacting by mechanical means crushed stone aggregate size 63mm to 45mm ( sixty three millimetre to forty five millimetre) Grading-II [75mm ( seventy five millimetres) consolidated thickness) to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (eighty to one hundred) K.N. static roller in stages to proper grade and camber including applying and brooming, stone screening type-B of size 11.2mm ( eleven point two milimetres) nominal size at the rate of 0.20 cum ( zero point two zero cubic metres) per ten square metres and binding material at the rate of 0.06 cum ( zero point zero six cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. technical specifications section 400 and as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental The rate is including octroi, royality, Malkhana, toll tax, GST and any other taxes imposed by the Government.

Providing, laying, spreading and compacting by mechanically means stone aggregate size 53mm to 22.4mm (fifty three millimeter to twenty two point four millimeter) Grading-III size [75mm( seventy five millimeters) compacted thickness] to water bound macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (eighty-Hundred) K.N. static roller in stages to proper grade and camber, applying and brooming, stone screening type-B of size 11.2mm (eleven point two milimetres) nominal size at the rate of 0.18cum (zero point eighteen) cubic metres per 10 Sqm (per ten square metres) and to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD technical specifications section 400 and as per the entire satisfaction and direction of Engineer–In-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkhana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying 30mm (thirty millimetre) compacted thickness bituminous concrete with 100-120 (one hundered to one hundered twenty) TPH hot mix batch type plant with electronic control grading-II using crushed aggregate 13.2 mm (thirteen decimal two millimetre) nominal size of specified grading premixed with bituminous binder VG-10 (Viscosity grade-Ten) at the rate of 5.5% (five point five percent) of mix weight or as per design mix, using cement as filler with quantity not less than 2% (two percent) by weight of total aggregate or as per design mix transported to site, laid with sensor paver finisher hydraulic with sensor conrol to the required grade, level and alignment, over a previsiouly prepared surface and rolling complete with sommth three wheel roller 8-10 (eight to ten ) tonne capacity for initial break down rollng and vibratory roller 8-10 (eight to ten) tonne capacity or pneumatic tyre roller of 12-15 (twelve to fifteen) tonne with tyre pressure of atleast 0.56 MPa (Zero decimal five six) for intermediate rolling and finish rolling with 6-8 (six to eighty) tonne sommth wheeled tandom roller to achive the desire compaction as per MoRTH technical specification section 500 complete in all respect or as directed by the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and applying primer coat with BITUMEN emulsion (SS-1) on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer at the rate of 0.85 Kgs per Sqm. (zero point eight five kilogram) per square metre using mechanical means as per MORD technical specifications section 500 including hauling of material in all leads, lifts as per the entire satisfaction and as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkhana, toll tax, GST and any other taxes imposed by the Government.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kgs (Zero decimal Two Seven Five kilogram) per square metre on the prepared granular surface treated with primer and cleaned with Hydraulic broom as per MORD Technical Specification section 500 as per direction of Engineer-In-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkhana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundered ten millimetre) nominal bore/diameter High pressure PVC Spigot and Socket, waste and ventilating pipe 4.00 to 4.6 mm (Four point zero to four point six millimetre) thick of ISI marked of Finolex / Vectus including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (One hundered fifty millimetre) nominal bore/diameter High pressure PVC Spigot and Socket, waste and ventilating pipe 4.00 to 4.6 mm (Four point zero to four point six millimetre) thick of ISI marked of Finolex / Vectus including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter High pressure PVC Spigot and Socket, waste and ventilating pipe 4.00 to 4.6 mm (Four point zero to four point six millimetre) thick of ISI marked of Finolex / Vectus including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (One hundered ten millimetres) diametre Plain bend on wall face PVC rain water pipes working pressure 4/6 K.g/cm2 (Four/six kilogram/per centimetres square) ISI marked of Finolex / Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter Plain bend ISI marked of Finolex / Vectus including fixing with approved adhesive complete. including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (One hundered ten millimetre) diametre P.V.C door bend with oval access door, of Finolex / Vectus insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110x75mm (One hundered into seventy five millimetre) nominal size ISI marked P.V.C floor trap of Finolex / Vectus of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (One hundered fifty millimetre) nominal bore/diameter ISI marked PVC collar of Finolex / Vectus complete upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (One hundered ten millimetre) nominal bore/diameter ISI marked PVC collar of Finolex / Vectus complete upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (One hundered ten millimetre) nominal bore/diameter P.V.C clamps of Finolex / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter P.V.C cowl of Finolex / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 90mm (Ninety millimetre) nominal bore/diameter P.V.C cowl of Finolex / Vectus ISI marked for waste and ventilating pipes including finishing with approved design with steel screws and rawal plugs etcetera. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (One hundered ten millimetre) nominal bore/diameter P.V.C cowl of Finolex / Vectus ISI marked for waste and ventilating pipes including finishing with approved design with steel screws and rawal plugs etcetera. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundered into three hundered millimetre) size (inside) the weight of cover to be not less than 4.50 (four point five)Per Kilogram and frame to be not less than 2.70 Per Kilogram (two point seven zero kilogram)as per standard design: 100x100 mm (one hundered into one hundered millimetre) size P type, with common burnt clay F.P.S. (non modular) bricks of class designation 7.5. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china waterless urinal of size 600x330x315mm (Six hundered into three hundered thirty into three hundered fifteen millimetre) as per model no. B2050106 having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. with C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, of approved make Hindware/ Cera/ Jaguar Star white/ Snowhite including painting of fittings and cutting and making good the walls and floors wherever required:Range of three half stall urinals with 10 (ten) litre P.V.C. automatic flushing cistern. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 300 x 320 x 720mm (Three hundered into three hundered twenty into Seven Hundered twenty millimetre) vitreous china division plate for urinals of Hindware/cera/Jaquar of star white / snow white shade complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing vitreous china pedestal type/wash down floor mounted water closet (WC) with size 475x370x420 mm (four hundered sevenety five into three hundered seventy into four hundered twenty millimetre) model no. 92076 white colour studio set along with 8mm (eight millimetre) diametre C.P/ S.S JET, SEAT COVER, Flushing CISTERN 10 ltr. (ten litre) capacity and twin flushing valves etc. complete in all respect, water closet (European Type - WC pan) with integral 'p' or 's' trap including jointing the trap with soil pipe in cement mortar 1:1 ( one cement, one sand) (with cistern, seat cover and flush fitting) Star White of Jaguar of snow white/star white shade / Hindware / Neyeer /Cera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 370x665x750mm, (three hundered seventy into six hundered sixty five into seven hundered fifty millimetre) floor mounted, white vitreous china single piece (WC) water closet as per model no. CNS-WHT-853S220SPPSM , double traps syphonic of approved brand/make of (Jaguar,Cera), shape, size and pattern as per approval of Engineer-In-Charge, including integrated white vitreous china cistern of capacity 10 (ten) litres with dual flushing system, PP Soft Close Slim Seat Cover, Hinges and set along with 8mm (eight millimetre) diametre C.P pre-installed jet arrangement including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the S trap 220 mm (two hundered twenty millimetre), complete in all respect including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing water closet squatting pan Cat no. 20042 with size of (580x440x300)mm (five hundered eighty into four hundered forty into three hundered millimetre) (Indian type W.C. pan ) with integral type foot rests of Hindware/ Cera/ Jaguar Star white/ Snowhite with 100 mm (one hundered millimetre) sand cast Iron P or S trap, 10 (ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing vitreous china pedestal type/wash down floor mounted Matrix water closet (WC) for specially abled person Cat no. 7011 with size of (740x550x835)mm (Seven hundered forty into five hundered fifty into Eight hundered thirty five millimetre) with supporting arrangement, white colour studio set along with 8mm (eight millimetre) diametre C.P pre-installed jet arrangement, SEAT COVER, Flushing CISTERN 10ltr. (ten litre) capacity and twin flushing valves etc. complete in all respect, water closet (European Type - WC pan) with integral 'p' or 's' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement, one sand) (with cistern, seat cover and flush fitting) of approved make (Hindware/ Cera/ Jaguar Star white/ Snowhite), complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing Health faucet ABS with rubbit cleaning system, flexible tube upto 1.25 mtr (one point two five metre) long PVC Flexible tube and ABS wall hook to extended wall mounted type W.C. of quality and make Kingston / Gem / Parko / JAL, ESS / Jaquar / Seiko complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 550x400x225mm (Five hundered fifty into four hundered into two hundered twenty five millimetre), half pedestal type wash basin having 510mm (five hundered ten millimetre) height from floor level of Hindware/ Cera/ Jaquar as per details with 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 520x450x200mm (Five hundered twenty into four hundered fifty into two hundered millimetre), counter type wash basin of Hindware/ Cera/ Jaquar as per details with 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing (450x300)mm (Four hundered fifty into three hundered millimetre), as per model no. 7207 matrix wash basin of Hindware/ Cera/ Jaquar as per details with 15mm (fifteen millimetre) nominal bore C.P. brass pillar taps, 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing Stainless Steel kitchen sink with drain board of Diamond/Unik/ Preyag big size 1040x510x250 mm (One thousand forty into five hundered ten into two hundered fifty millimetres) including C.P. waste with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen millimetre) nominal bore, C.P. brass sensor based tap (RESF-103, AC+DC) model no. 8934, of Jal / ESS or its equivalent low voltage alarm Shock Resistant Anti-interference Auto cutt off, Battery life cycle:3000 cycles sensing distance: 0-6 inches, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal bore, C.P. brass wall mixer for bath with long headed bib cock and L-bend of continental series of Jaquar / Hindon series of Jal / ESS (superior or heavy type) approved quality conforming to IS:8934 including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass bib tap of conforming to IS:8931 of Jaquar / Hindware / Cera / Kerovite and Jal of approved quality (superior or heavy type) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass 98 mm (ninety eight millimetre) long push cock of approved quality and colour of Jaquar / Hindware / Cera / Kerovite and Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15 mm (Fifteen millimeters) nominal bore, C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms Jaquar / Hindware / Cera / Kerovite and Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass pillar tap of conforming to IS:8931 of Jaquar / Hindware / Cera / Kerovite and Jal of approved quality (superior or heavy type) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeter) diametre C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 Jaquar / Hindware / Cera / Kerovite and Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 32 mm (Thirty two millimetre) diametre P.V.C. flexible waste pipe of Finolex / Relpipe (Reliance )/Vectus for sink or wash basin including P.V.C. waste fittings complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing C. P. Brass overhead shower rose with 15mm (Fifteen millimeters) inlet 100mm (one hundered millimetre) with single flow and shower arm of Jaquar / Hindware / Cera / Kerovite and Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimetre) nominal size gun metal gate valve with C.I. wheel of approved quality (screwed end) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimeter) diametre C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, Jaquar / Hindware / Cera / Kerovite and Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 1216 (16mm (sixteen millimetre) OD pipe Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C (Eighty degree celcius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera with clamps at 1.00 metre (One metre) spacing for concealed works, including cutting chases, testing the joint and making good the wall etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 1620 (20mm (Twenty millimetre) OD pipe Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C (Eighty degree celcius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera with clamps at 1.00 metre (One metre) spacing for concealed works, including cutting chases, testing the joint and making good the wall etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) diametre to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimetre) diametre to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five millimetre) diametre to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 600x450mm (Six hundered into four hundered fifty millimeters) bevelled edge mirror of superior glass mounted on 6mm (Six millimeters) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 1500x750mm (one thousand five hundered into seven hundered fifty millimetre) beveled edge mirror of superior glass (of approved quality) for public toilet complete with 6 mm (Six millimetres) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 600x120x5 mm (Six hundered into one hundered twenty into five millimetre) glass shelf of Jaquar / Hindware / Cera / Kerovite and Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm (Forty millimetre) long screws, rawl plugs etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass soap Dish Holder having length of 138mm (one hundered thirty eight millimetre), breadth 102mm (one hundered two millimetre), height of 75mm (seenty five millimetre) with concealed fitting arrangements, weighing not less than 106 (one hundered six) gms complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and Fixing in position Aluminium C.P glossy wall mounted 6 (six) pegs hooks rail fixed with C.P. brass screws and rawl plugs etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass toilet paper Holder including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimeters) dia M.I. unions for wash basin and sink complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeter) diametre C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, Jaquar / Hindware / Cera / Kerovite and Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundered millimetre) diametre chromium plated grating of superior quality for floor, gully or nahani trap complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 8 mm (Eight millimetre) diametre C.P. / S.S. Jet of Jaquar / Hindware / Cera / Kerovite and Jal with flexible tube upto 1 metre (One metre) long with S.S. triangular plate to Eureopean type W.C. of approved quality and make as approved complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC connection pipe ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore with brass unions complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeters) nominal bore brass full way valve with wheel of Jaquar / Hindware / Cera / Kerovite and Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimeters) nominal bore brass full way valve with wheel of Jaquar / Hindware / Cera / Kerovite and Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (one hundered ten millimetre) diametre P.V.C single equal branch of Finolex / Relpipe (Relience) / Vectus with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetre) diametre P.V.C single equal branch of Finolex / Relpipe (Relience) / Vectus with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (one hundered fifty millimetre) diametre P.V.C single equal branch of Finolex / Relpipe (Relience) / Vectus with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (One hundered ten millimetre) diametre P.V.C double equal branch of Finolex / Relpipe (Relience) / Vectus with insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (one hundered fifty millimetre) diametre P.V.C double equal branch of Finolex / Relpipe (Relience) / Vectus with insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (One hundered ten millimetre) diametre P.V.C plain double equal branch with oval access door, of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (one hundered fifty millimetre) diametre P.V.C plain double equal branch with oval access door, of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass towel rail as per model no. FS007103 of Jaquar / Hindware / Cera / Kerovite and Jal with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm (six hundered millimetre) long towel rail with total length of 645 mm (six hundered forty five millimetre), width 78 mm and effective height of 88 mm (eighty eight millimetre), weighing not less than 190 (one hundered ninety) gms complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and Fixing Charomium plated 40mm (forty millimetres) diametre steel pipe for grab bars at 78cm (seventy eight centimetres) height M.S. plate as per details at the position of the seat and Wash Basin complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass towel ring of Jaquar / Hindware / Cera / Kerovite and Jal trapezoidal shape 215 mm (two hundered fifteen millimetre) long, 200 mm (two hundered millimetre) wide with minimum distances of 37 mm (thirty seven millimetre) from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 (eighty eight) gms including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of Finolex / Vectus having tripple layer of IS No: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including fittings but excluding the base support for tank complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40mm (Twenty milimetres to Forty milimetres) nominal bore by providing and fixing tees including cutting and threading the pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One Cement : four Sand : eight graded stone aggregate 40mm (Forty millimetre) nominal size ) all round for PVC. pipes of 150mm (One hundered fifty millimetre) internal diameters, for bedding , necessary form work and curing complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:3:6 (One Cement : three Sand : six graded stone aggregate 40mm (Forty millimetre) nominal size ) all round for PVC. pipes of 150mm (One hundered fifty millimetre) internal diameters, for hauching, necessary form work and curing complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 (One cement : Four coarse sand ) with R.C.C. top slab with 1:2:4 mix (One cement : two coarse sand (zone- III) : four graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:4:8 mix (One cement : Four coarse sand (zone- III) : Eight graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelve millimetre) thick with cement mortar 1:3 (One cement : Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement : Two coarse sand : Four graded stone aggregate 20 mm (Twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cm (Ninety into eighty centimetre) and 45cm (Forty five centimetre) deep including C.I. cover with frame (light duty) 455x610mm (Four hundered fifty five into six hundered ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 Per Kilogram (Thirty eight kilograms) (weight of cover 23 Per Kilogram (Twenty three kilograms) and weight of frame 15 Per Kilogram (Fifteen kilograms) With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 (One cement : Four coarse sand ) with R.C.C. top slab with :2:4 mix (One cement : two coarse sand (zone- III) : four graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:4:8 mix (One cement : Four coarse sand (zone- III) : Eight graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelve millimetre) thick with cement mortar 1:3 (One cement : Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement : Two coarse sand : four graded stone aggregate 20 mm (Twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90cm (One hundered twenty into ninety centimetre) and 90cm (Ninety centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (Four hundered fifty five into six hundered ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 Per Kilogram (Thirty eight kilograms) (weight of cover 23 Per Kilogram (Twenty three kilograms) and weight of frame 15 Per Kilogram Fifteen kilograms) With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (One cement : Four coarse sand) C.I. cover with frame (light duty) 455x610mm (Four hundered fifty five into six hundered ten millimetre) internal dimensions, total weight of cover with frame to be not less than 38 Per Kilogram (Thirty eight kilograms) (weight of cover 23 Per Kilogram (Twenty three kilograms) and weight of frame 15 Per Kilogram (Fifteen kilograms) ), R.C.C. top slab with 1:1.5:3 mix (One cement : One and Half Fine sand : Three graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:5:10 (One cement : Five fine sand : ten graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelev millemetre) thick with cement mortar 1:3 (One cement : Three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete as per standard design Inside dimensions 455x610 mm (Four hundered fifty five into six hundered ten millmetre) and 45 cm (Forty five centimetre) deep for single pipe line complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 455x610mm (Four hundered fifty five into six hundered ten millimetre) light duty rectangular cast iron manhole with frame cover weight 23Per Kilogram (Twenty three kilograms) single seal pattern complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Supplying and fixing C.I. cover 300x300 mm (three hundered into three hundered millimetre) without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 Per Kilogram (four point five kilogram) complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing S.F.R.C heavy duty manhole cover Circular shape 560mm (five hundered sixty millimetre) diametre precast R.C.C. manhole cover with frame - H.D. - 20 (twenty) within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Provision for water lifting pump 1.00 HP (One point zero zero horse power) of serex/Kirloskar/Crompton/Wortington including all necessary fittings complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 25 mm (twenty five millimetre) diametre fire hydrant inculuding all necessary fiting compelete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Consultancy fees for preparation of detailed survey plan, preparation of architectural & Good for Construction drawings (including architectural detailing, electrical installation, fire fighting, WS & SI services drawings etc) and structural drawings (including providing complete geotechnical reports, structural analysis & Drawings) by taking approval of the same from the competent authority, client department (Tourism Department) and third party vetting from NIT/IIT/PEC Chandigarh,complete in all respects as per the direction and entire satisfaction of the Engineer-in-charge.

Please Enable Macros to View BoQ information