GE(S)/M-13/2020-21

Amount

M&L for 10mm thick rendering in CM 1:6 on brick work or concrete surfaces, finished even and smooth without using extra cement including taking down existing cement plaster, hacking for key, raking out joints, scrubbing down with water etc, complete all as specified and directed by Engineer-in-Charge.

M&L for 10mm thick rendering in CM 1:6 on brick work or concrete surfaces in patches, finished even and smooth without using extra cement including taking down existing cement plaster, hacking for key, raking out joints, scrubbing down with water etc, complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work or concrete surfaces with using liquid WPC @ 0.200ml / 50 Kg bag of cement, finished even and smooth without using extra cement including taking down existing cement plaster, hacking for key, raking out joints, scrubbing down with water etc, complete all as specified and directed by Engineer-in-Charge. Note :- WPC shall be measured and paid separately.

M&L for 10mm thick rendering CM 1:3 on facia / edging / ceiling of Chajjas, roof projections etc. including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface even and smooth without using extra cement, including taking down existing cement plaster, hacking for key, raking out joints, scrubbing down with water etc, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new surfaces of walls and applying two coats of oil bound distemper over one coat of chalk white primer, complete all as specified and directed.

M&L for preparation of new surfaces of walls and applying two coats of cement base paint over one coat of alkali resistant primer, complete all as specified and directed.

M&L for 5mm thick rendering in CM 1:3 on ceiling, finished even and smooth without using extra cement including taking down existing cement plaster, hacking for key, raking out joints, scrubbing down with water etc, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of ceiling, roof projection and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of cement base paint including curing before and after providing cement base paint, complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of OBD (Oil Bound Distemper), complete all as specified and directed.

M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying two coats of white wash, complete all as specified and directed.

Demolition of cement concrete and paving not exc 15cm thick in floors and the like, complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in sub base of floor, complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection and paving, laid in slope, finished even and fair including making joints at every 2.5 Mtr and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight, complete all as specified and directed by Engineer-in-Charge.

M&L for sand filling under paver blocks, complete all as specified and directed by Engineer-in-Charge.

M&L for Fly Ash glossy finished coloured chequered cement concrete tiles of size 30cm X 30cm X 25mm thick, set, jointed & pointed in neat cement slurry with grey cement and pigment to match as in floors over and including 15mm thick screed bed or bedding layers in CM 1:6, complete all as specified and directed.

M&L for coloured machine pressed precast rubber moulded conctete interlocking (Grey/red/yellow) paver block of any shape and size having high glossy finish confirming to IS : 15658-2006 of 60mm thickness, M-35 Grade, complete all as specified and directed.

M&L for coloured machine pressed precast rubber moulded conctete interlocking (Grey/red/yellow) paver block of any shape and size having high glossy finish confirming to IS 15658-2006 of 80mm thickness, M-40 Grade, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes including dismantling existing floor, hearth or wall tiling of any description, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes including dismantling existing floor, hearth or wall tiling of any description, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles including dismantling existing floor, hearth or wall tiling of any description including cement mortar bedding (but not backing), removing serviceable tiles from site and rubbish off the premises, complete all as specified and directed.

M&L for 20mm thick black granite (of any type) work (table rubbed and polished) in single piece as in cooking platform and the like, set and jointed in neat cement slurry including pointing in epoxy grout to match with granite shade including making hole for gas pipe, laid over and including 15mm thick screed bed in CM 1:4 including demolition of existing stone slabs/tiles ot tiles of any description, complete all as specified and directed.

M&L for brick work with Fly Ash bricks (Old size bricks), straight or curved on plan exc 6 Mtr mean radius, built in CM 1:6 including demolition of existing brick work, complete all as specified and directed by Engineer-in-Charge.

M&L for 10mm thick rendering in CM 1:6 on brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

S&F Rotational moulded polyethlene water storage tank of capacity 1000 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1 and including dismantling of existing PVC tank, complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tank of capacity 500 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1 and including dismantling of existing PVC tank, complete all as specified and directed.

S&F in replacement ball valve, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20mm bore pipe, complete all as specified and directed.

M&L for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down existing pipe, complete all as specified and directed.

M&L for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down existing pipe, complete all as specified and directed.

Cutting 15/20mm existing steel tubing for alterations or additions (Each cut measured) in position without taking down, complete all as specified and directed.

S&F in replacement gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed for 20mm bore iron pipe, complete all as specified and directed.

M&L for 20mm thick cement plaster on roof top in CM 1:4 on concrete surfaces, finished even and smooth with using liquid WPC as per manufacturer's instructions @ 0.200 Ltr in 50 Kg of cement, complete all as specified and directed.

S&F in replacement 15mm bore stop / angle valve with flange, cast copper alloy (ISI Marked), chromium plated, screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F in replacement 15mm bore stop valve, cast copper alloy (ISI Marked), fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F in replacement 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in replacement Vitreous china wash basin, white flat back of size 550mm x 400mm including 32mm size CP waste coupling full thread and 32mm dia PVC waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and directed.

S&F in replacement 15mm bore Pillar cock, fancy type, screwed down, high pressure with or without letters, hot or cold with long screwed shank and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F in replacement tubular towel rail, 20mm dia 'D' type, 60cm long between flanges, complete all as specified and directed.

S&F in replacement CP shower rose with or without swivel joints of any size including fixing to iron pipe or union, complete all as specified and directed.

S&F in replacement Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover for pedestal pan and connecting etc, complete all as specified and directed.

S&F in replacement PVC flushing cistern of 10 Ltrs capacity including PVC inlet and outlet connections, brackets, PVC flush pipe with bend 32mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.

S&F in replacement syphonic action kit for PVC flushing cistern of 10 Ltrs capacity, complete all as specified and directed.

S&F in replacement Jet Spray (with 1.50 Mtr tube), fixed to EWC and angular stop cock/valve, complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in replacement sink with drainage board, made of stainless steel 1mm thick, kitchen with plugs, washers, PVC waste pipe including CP waste copling and bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in replacement stainless steel kitchen plate rack of size 750mm x 900mm of approved make, fixed with SS screws, complete all as specified and directed.

S&F LDPE waste pipe, 32mm dia suitable for WHB / Sink including threaded PVC socket suitable for shank of waste coupling, complete all as specified and directed.

S&F in repair/replacement 100mm bore cast iron (sand cast) soil waste and vent pipes, ISI Marked in any length with or without ears, fixed to walls with clamps and cement joints, complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) not exc 1.50 Sqm each, complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.50 Sqm but not exc 4.0 Sqm each, complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.

S&F Box type steel window and ventilator, comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes shall be measured and paid separately under respective items of BOQ) with steel handles and steel peg stay dovetailed or welded including 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drawing, welded to FI frame work including other fittings such as hinges, handles, tarred hold fasts, fixed in PCC blocks and including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as shown on drawing No. CEPZ/TD-354/09 sheet 1/3 to 3/3.

S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 35mm thick factory made wire guazed and skeleton shutters (1st class softwood), open rebated and prepared to receive wire cloth, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire cloth etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats at site, complete all as specified and directed.

S&F 30mm thick Factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, fixed in the frame at site as per specifications & drawing.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm Wenga/Teak colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification and drawing.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame, glazed with putty or fixed with beads / clips, complete all as specified and directed.

S&F 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F 3.0mm thick Figured glass, pin head type in square not exc 0.50 Sqm each pane, fixed to aluminium framed (venilators) with oil putty or rubber beading, complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F stainless steel grating doom 100mm dia, fixed in floor, complete all as specified and directed.

S&F stainless steel grating doom 100mm dia with waste hole, fixed in floor, complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or fixed to walls with clamps, complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bend (any radius), complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from water tank and from mouths of circulating pipes without disconnecting of capacity exc 250 Ltrs but not exc 500 Ltrs, complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from water tank and from mouths of circulating pipes without disconnecting of capacity exc 500 Ltrs but not exc 1000 Ltrs, complete all as specified and directed.

Providing chemical emulsion for post constructional antitermite along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed.

M&L for treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors, complete all as specified and directed.

Providing chemical emulsion for post constructional antitermite of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors, complete all as specified and directed.

Providing chemical emulsion for post constructional antitermite at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.50 Litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and directed.

M/S CANTILEVER ENGINEERS

M/S AV BUILDERS

M/S TARA CHAND CONSTRUCTION CO.

M/s GIrdhari Lal Rakesh Kumar

PALSON ENGINEERS

M/S MALHOTRA ENGINEERS

M/s Ashoka Brothers

WALIA ENTERPRISES

M/S INDIAN ELECTRICAL

dadwal engineers

kewal builders

Alishan Builders

Walia trading co

SUBASH MAHAJAN