Pipeline

Cutting open CC road surface including stocking of excavated materials for pipeline trench work with driling machine including labour charges all operational and incidental charges etc., complete Gayatri bank to Hanuman statue

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH For Chamber

Carting away the surplus excavated earth from work site upto 5 km lead including loading,unloading and conveyance etc. complete.

RBR-FNDN-22: Supply and Filling with HBG Stone Chips 12mm to 14 mm size with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) For restoration, For Chamber

Plain cement concrete (1:4:8) using 40 mm metal with Concrete mixture work up to plinth levelincluding cost and conveyance of all materials and labour charges etc complete excluding seignorage charges.

BLD-CSTN-4-1-(34) ; Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500/550/550D) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126 )

RBR-CCPV-5: Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. For bed, For walls and For restoration

Manufacture, supply, & delivery of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia stright length in6 M.) (Gayatri Bank to Hanuman statue) OD 110mm dia pipe (PE-100 grade= 6Kg/cm2)

Manufacture, supply, & delivery of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia stright length in6 M.) (Gayatri Bank to Hanuman statue) OD 140mm dia pipe (PE-100 grade= 6Kg/cm2)

Manufacture, supply and delivery of HDPE fittings conforming to IS -4984 -1995 including transporation to any where in T.G

HDPE end Caps (110mm OD )

HDPE end Caps (140mm OD )

HDPE Tees (110mm OD )

HDPE Tees (140mm OD )

HDPE Tees (180mm OD )

HDPE Reducers90 mm x 110 mm

HDPE Reducers125 mm x 140 mm

HDPE Reducers160 mm x 180 mm

Laying and Jointing of HDPE pipes by butt fusion welding as per IS :7634- Part-II/1975 as amended from time to time to the alignement and gradient and testing the pipeline to the requirement pressure 140mm

Laying and Jointing of HDPE pipes by butt fusion welding as per IS :7634- Part-II/1975 as amended from time to time to the alignement and gradient and testing the pipeline to the requirement pressure 110mm

Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2- 1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846- 2000/DIN 3202 F 4. All the valves should be withElectrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538.

Cost of M.S Flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness confirming to is:7322-1985 and flange dimensions confirming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site etc., complete.

100 mm dia x 15 mm thick

150 mm dia x 15 mm thick

Manufacture, Supply & Delivery of 20mm MDPE SDR-11 PN-12.5pipe conforming to ISO 4427 Part-2 (or any equivalent Bureau of Indian Standards code) of PE-80 grade material along with all fittings, including cost of materials, manufacturing, loading, unloading, stacking, transit insurance, transportation to any where in Telangana but excluding GST.

Lowering, Laying, jointing of 20mm PVC/HDPE/MDPE pipes as per BIS No.7634 part-III/75 for PVC and BIS No.7634 part-II/75 for HDPEpipes including earth work excavation, testing to hydraulic testpressure including cost of water with a water lead of complete, but excluding road cutting (BT/CC) charges.Complete.

Supply of tamper proof house hold non return cum flow control valve (with all three parts made by using sold steel bars of SS316) with CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.5 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle (as per CPHEEO manual) including cost of materials, manufacturing, loading, unloading, stacking, transit insurance, transportation but excluding GST.

PP Clamp Saddle (90X3/4")shall comply with AS/NZS 4793 or relevant international standards-Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/ IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP Saddles shall be blue with moulded SS female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and SS nut-bolt-washer. Maximum working pressure rating of 10 bar.

Supply of 20mm x ½” PPR Female Threaded Adaptoptor conforming to DIN Standards 8077/8092

Supply of 20mm x ½” PPR Female Threaded Elbow conforming to DIN Standards 8077/8092 E