Loading
Loading…
Loading…
Tender Value
₹25.0 L
EMD Value
₹50,000
Closing Date
9 Oct 2026, 3:00 pm
Executive Engineer MID Shadipora
MID Shadipora
Supply installation testing and commissioning of 10 Cusec Horizontal pumping units(01No.) at Purandub Pump station Sadunara Hajin under Untied Grants (Distt Capex Budgets)
2026_IFC_325913_1
e-NIT No.12 of 2026-27
Open Tender
Machineries/ Mechanical Engg Items
Percentage
Shadipora
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
Executive Engineer MID Shadipora
₹50,000
24 Sept 2026
24 Sept 2026
10 Oct 2026
24 Sept 2026
9 Oct 2026
24 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Mechanical Part | 1 | job | - | - |
| 2 | Design, manufacture, supply, installation, testing and commissioning of horizontal pumping unit: 10 cusec (1020 m³/hr) discharge; dynamic head 6.50 m; 960 RPM; efficiency not less than 80%; raw water (Jhelum River); single stage; continuous duty; NPSHA 4.32 m. Casing: Cast Iron FG260; impeller: CF8M, ASTM A351; shaft and shaft sleeve: SS410; case wearing ring: CF8M. Motor: 40 HP, 50 Hz ±3%, 3-phase, 415 V ±10%, IE2, 960 RPM synchronous, Class F or above insulation, TEFC. Flexible all-metal coupling with flexible metal insert and coupling guard. Rigid common MS-channel base frame, duly painted, including foundation bolts and installation accessories. | 1 | Job | 10,00,000 | ₹10,00,000 |
| 3 | Fabrication, supply, installation, testing and commissioning of 450 mm ND MS suction pipe, 6.0 mm wall thickness; OD 457 mm; ERW; Fe410; MS plate as per IS 10748; pipe as per IS 3589; make: Prakash Surya/Jindal/SAIL/Tata/equivalent; two coats steel primer followed by two coats black bituminous paint. | 6 | job | 8,650 | ₹51,900 |
| 4 | Fabrication, supply and installation of 450 mm ND MS flanged bend for suction side, 6.0 mm thick, with MS flanges at both ends as per Table 11 of IS 6392, including two coats steel primer and bituminous paint. | 1 | job | 33,500 | ₹33,500 |
| 5 | Providing, fitting, testing and commissioning of 450 mm swing-type flanged MS foot valve with strainer, including nuts, bolts, RI cloth, washers and other consumables. | 1 | job | 32,500 | ₹32,500 |
| 6 | Fabrication, supply, installation and testing of 400 mm ND × 350 mm ND × 500 mm long MS eccentric reducer, 6.0 mm thick, flanged at both ends, for suction side; including nuts, bolts, washers and painting with two coats steel primer followed by two coats bituminous paint. | 1 | MM | 23,500 | ₹23,500 |
| 7 | Fabrication, supply, installation and testing of 450 mm ND × 350 mm ND × 500 mm long MS eccentric reducer, 6.0 mm thick, flanged at both ends, for suction side; including nuts, bolts, washers and painting with two coats steel primer followed by two coats bituminous paint. | 1 | job | 25,500 | ₹25,500 |
| 8 | Fabrication, supply, installation and testing of 400 mm ND, 6.0 mm thick MS delivery/rising-main pipe; OD 406.4 mm; ERW; Fe410; MS plate as per IS 10748; pipe as per IS 3589; make: Prakash Surya/Jindal/SAIL/Tata/equivalent; two coats steel primer followed by two coats black bituminous paint. | 12 | jobs | 7,700 | ₹92,400 |
| 9 | Fabrication, supply and installation of 400 mm ND MS flanged bend for delivery side, 6.0 mm thick, with MS flanges at both ends as per Table 11 of IS 6392, including two coats steel primer and bituminous paint. | 1 | Jobs | 28,500 | ₹28,500 |
| 10 | Fabrication, supply and fitting of 450 mm dia. MS flanges for suction pipe, including nuts, bolts and gaskets. | 4 | Job | 4,400 | ₹17,600 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.63 MB
BOQ_1101825.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .