Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹15.5 L
EMD Value
₹31,000
Closing Date
11 Nov 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer REW, Jammu
Office of the Executive Engineer REW, Jammu
Construction of Road, Drain and Small Culvert on link road to house of S. Jeeva Singh at W. No. 02, Nrdi Bala, Panchayat Nrdi Block Mira Mandria under Scheme District Capex Budget (Untied Component). for the year 2025-26.
2025_RDPR_293558_1
e-NIT No. 616-REWJ of 2025 Dated. 29-10-2025 (1st Call)
Open Tender
Civil Works
Percentage
100 days
Jammu
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Govt. Treasury
₹31,000
1 Nov 2025
29 Oct 2025
12 Nov 2025
29 Oct 2025
11 Nov 2025
29 Oct 2025
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5coarse sand :10 graded stone aggregate 40 mm nominal size)
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) 80%
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforcement for RCC work including straightening , cutting, bending, placing in position and binding all complete
Centering and shuttering including strutting propping etc and removal of form for: foundation footings, bases of columns etc for mass concret.
Centering and shuttering including strutting propping etc and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
Cetering and shuttering including strutting propping etc and removal of form for suspended floors, roofs, landing, balconies and access platform
Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls Above 20 cm wide
Providing and laying 80mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge
Carriage of Sand and Aggrigate with in average lead 10.00 Km by M.T
Add Provission for painting writing on Citizen information Board etc. all complete job
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.06 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.60 MB
BOQ_949068.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .