SPL REPAIR TO BLDG NO TW-28 AND PROVN OF 02 X URINAL POT NEAR CTW MAIN GATE UNDER GE (MCTE) MHOW

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified

Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar, complete all as specified

Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified

Taking down cement plaster on brick wall/ceiling built in cement mortar including raking out joints, hacking for key scrubbing down with water complete all as specified

Taking down Chowkhats with shutters (without taking off shutters from the frame) area not exc 1.5 Sqm each complete all as specified

Taking down Chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but nexc 4.0Sqm each ccomplete all as specified

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door Chowkats of size 65 x 125mm double rebate of virgin PVC polymer of K value 58-60 (Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ ricehusk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strenght of 2200 N (Face) & 1100 N (Edge), minimum compressive strenght of 58 N/mm sqr, modules of elasticity 900 N/mm sqr and resistance to spread of flame of Class A category with property of being termite /borer proof, water/ mositure prooof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and lenght complete as per direction of Engineer-in-Charge. (MS hold fast/ lugs or SS dash fasteners etc. complete all as specified

S & F Factory made single extruded WPC (Wood Polymer Composite) solid DECORATIVE TYPE FLUSH DOOR SHUTTER of size 30mm thick comprising of virgin PVC polymer of K value 58-60 (Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ ricehusk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 650 kg/cum, screw withdrawal strenght of 1800 N (Face) & 900 N (Edge), minimum compressive strenght of 50 N/mm sqr, modules of elasticity 850 N/mm sqr and resistance to spread of flame of Class A category with property of being termite/ borer proof, water /mositure prooof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per the direction of Engr-in-Charge. (Note stainless steel butt hinges and necessary scews shall be paid seperately. Make : ECOCELL (Product of Kumar Arch Tech Pvt Ltd), Floresta, of equivalent

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain glazed and skeleton shutters open rebated and prepared to to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutterof size 30mm thick comprising of virgin PVC polymer of K value 58-60 (Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ ricehusk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 650 kg/cum, screw withdrawal strenght of 1800 N (Face) & 900 N (Edge), minimum compressive strenght of 50 N/mm sqr, modules of elasticity 850 N/mm sqr and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ mositure prooof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per the direction of Engr-in-Charge. (Note stainless steel butt hinges and necessary scews shall be paid seperately complete all as specified

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing with prelam sheet all as on drawing on Sl page No 178 of SSR Part-II, complete all as specified

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side Prelam PVC sheet used instead of plain colour PVC sheet with solvent cement for stiles and top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour Prelam PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F 125mm size, butt hinges, medium weight, cold rolled mild steel, complete all as specified

S&F 100mm size, butt hinges, medium weight, cold rolled mild steel, complete all as specified

S & F Aluminum handle cast type anodized size 150mm long, complete all as specified

S & F Aluminimum anolised barrel tower bolt of extroded section 150mm long, complete all as specified

S&F 300mm aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified

S&F Hasp & staple aluminium anodised, safety type, including bolt to hinge plate and fixed with screw 100mm size, complete all as specified

S&F door spring with 300mm mild steel rat rail rod pattern of standard quality including roller and roller plate complete Helical spring), complete all as specified

Providing and fixing fixed louvers fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 grams/Sqm) with thickness of 0.58mm coated sections to be primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33 x 58mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/ masonry walls by means of self expanding screws, complete all as specified

Providing and fixing pre painted steel sliding window 3-Track, 2 glass panel and 1 mesh panel sliding window fabricated from Roll formed sections made of galvanized Steel colour coated/ powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. Section for external frame should be of 107 x 44mm, Section for shutter should be of 35 x 49mm. Section of mesh should be of 35 x 49mm. The windows should be paneled with 5mm thick plain clear glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM). The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should be fixed to the concrete/ masonry walls by means of self expanding screws, complete all as specified

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified

M&L for rolled section/ hollow tube section as in post, main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecction plates including drilling hole for bolting, connecting to gusset plate etc complete all as specified

M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer ccomplete all as specified

M & L for Virified Ceramic tiles 10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified

M & L for Virified Ceramic tiles 10mm thick light shade (square/ rectangular) on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles, complete all as specified

M&L for nonskid ceramic tiles 7 to 8mm thick of any shade (square/ rectangular) area of each tile as in floors exc 0.11 and not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick screed bedding layer in cement sand mortar 1:6, complete all as specified

M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface 450 x 300 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in 1:4 CM complete all as specified

M&L for pre polished coloured cement concrete chequred tile of approved quality size 300 x 300 x 25mm thick on floors over and including 20mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified

M & L for 25mm thick PCC 1: 2: 4 type B-0 using 12.5mm graded stone aggregate as in base floor or maintain to even surface complete all as specified

M&L for 75mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finished even and fair incl cutting joints and filling with bitumen and sand mixture complete all as specified

M&L for Machine cut mirror polished kota stone slab flooring with rounded edge 20-25mm thick over cement screed bed (1:6) 15mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified

M&L for Machine cut kota stone skirting 18-20mm thick in riser of steps skirting, dado, and pillar over 10mm thick backing coat in cement mortar in (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and mirror polishing complete all as specified

M&L for mirror poishing of old kota stone complete all as specified

M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified

M &L for Brickwork with subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified

M&L for 75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base under floors complete all as specified

M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M & L for prepration of new wall surfaces & applying birla/ J.K. wall care white putty 2mm thick for levelling the surfaces and applying two coat of interior emulsion distemper over a coat of wall primer incl. preparation of surfaces of walls complete all as specified.

M&L for Rendering 15mm thick on fair faces of concrete/ brick exterior surfaces in cement mortar 1:4, finished fair and even without using extra cement complete all as specified

Supply only integral water proofing compound complete all as specified and directed.

M & L for Prepration of new surfaces and applying two coats exterior weather coat over one coat of exterior primer over and including 2mm thick wall putty etc,complete all as specified

M&L for complete removal of existing treatment from wall by scrapping of surfaces of old decorated (exterior)) walls etc, and applying Birla/ J.K. wall care white putty 2mm thick for levelling the surfaces including properly making of 'V' shape crakes and filling of all crakes with crakes seal of walls & applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified

M&L for complete removal of existing treatment from (interior) walls by scrapping & washing etc and applying Birla/ J.K. wall care white putty 2mm thick for levelling the surfaces including properly making of 'V' shape crakes and filling of all crakes with crakes seal of walls and applying two coats of oil emulsion distemper over a coat of primer complete all as specified

M&L for Cutting holes in brick/ block walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc half brick n.exc one brick complete as specified.

S&F in repair 25mm bore SS Pipe curtain rods including SS Brackets & SS Decorative dome, suitable for door/ widows curtain with fancy type powder coated SS dooms with ss brackets fitted to each end and fixed to wall incl. removal of existing rod and making good etc complete all as specified.

M&L for preparation of Old steel surfaces of any description, over 10 cm width or girth and applying one coats of synthetic enamelled paint complete all as specified

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including Nainital or similar pattern Roof covering complete all as specified

S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified

S&F rolled sections as in posts, main and cross beam, hip and jack rafters, purlins, where connected to common rafters (beam, tee, angle, channel pipes, tubes, plates and flat sections etc) including distances pieces, cleats etc cutting half brick thick wall and fixing with cement mortar complete all as speified and directed of grade FE-410, (gde-E-250) quality complete all as specified

Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs complete all as specified

Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24 x 38mm having 0.25mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25mm gauge at 1200mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200mm c/c in both directions using 3.0mm thick pre-straightened GI wire. laying 595 x 595 x 6mm thick E-Board Designer ceiling fixing 600mm x 60mm x 6mm grid (Frame work) complete all as specified.

S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe complete all as specified

S&F in repairs low leve flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified

S & F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified

S & F in repairs Vitreous China Thin Rim Table Top Basin. Shape -Round, Size - 360 x 360 x 120mm. Make : Jaquar Cat Part No SLS-WHT-6905 or equivalent complete all as specified

S&F Brass Bottle Trap 300mm (12") Designer wall connection pipes and wall flange complete all as specified

S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange without hand & over head Shower screwd down for 15mm GI bore pipe complete all as specified

S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified

S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook, complete all as specified

S&F in repairs kitchen plate rack with and including shelves and hanging arrangement for utensil for kitchen, made of stainless steel sheet 0.63mm thick size 30" x 36" x 10", complete all as specified

S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm, complete all as specified

S&F Grating 100mm dia of CP with or without hole, complete all as specified

S&F in repair 15mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified

S&F in repair 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified

S&F in repair chromium plated brass Sink mixer waste system complete screwd down for 15mm GI bore pipe complete all as specifed and directed. Unions complete all as specified

S & F in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified

S & F in repairs two way Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified

S & F in repairs Toielt Paper Holder Stainless Steel fixed to wall complete all as specified

S & F in reparis Stainless Steel Wall Mount Soap Case fixed to wall complete all as specified

S & F in repairs aluminium alloy brackets and guard rail 5.5mm Glass Shelf of Size 12mm wide 60mm long complete all as specified

S&F in repairs Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to Vitreous china, wash down water closet pan (pedestal pattern), Stop cock/ angle cock a complete all as specified.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing complete all as specified

S&F, laying and testing for 15mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors, complete all as specified

Taking up or down steel tubing and connections for bore of tube 20mm, complete all as specified and directed.

S&F GI tubing Medium grade galvanised with all fitting and fixed bore of tube 20mm, with necessary union, socket, nipleetc, complete all as specified

Cutting chases, pinning in, making good to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in Stone, concrete block or slab walls, complete all as specified

Taking down Old PVC or AC rainwater/ waste/ vent pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, complete all as specified

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall, complete all as specified

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fix to wall, complete all as specified

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified

S&F in repairs PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 75mm bore complete all as spcified.

S&F PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 110mm bore complete all as spcified.

S&F PVC floor trap, with grating 75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4) in repairs and including waterleak proor treatment complete all as spcified

Dismantling water tanks and removing to store exc 500 & n. exc 1000 litres capacity, complete all as specified

S & F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I 1000 litres capacity, complete all as specified

S&F in repair 20mm dia Ball valves, of PTMT high pressure, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15 to 25mm to 142 - 455 gms), complete all as specified

S&F in repair 20mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed, complete all as specified

S&F in repairs 18mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc, complete all as specified

S & F in repairs factory made PVC shelf/ partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement complete all as specified

S&F stainless steel shelf closing hinges 75mm size for PVC door shutters, complete all as specified

S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter, complete all as specified

S& F 100mm size MS mat/ glossy finish handle, complete all as specified

S&F modular type stainless steel Cutlery basket size 20 x 19 x 4 inches 9 dia of wire not less than 3.00mm of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arrangement complete all as specified and directed.

All as per item No.98 above but plain busket size 20 x 19 x 6 incles complete all as specifed and directed.

All as per item No.98 above but thali busket size 20 x 19 x 8 incles complete all as specifed and directed.

All as per item No.98 above but cup & saucer busket size 20 x 19 x 4 incles complete all as specifed and directed.

All as per item No.98 above but grain busket size 20 x 19x 6 incles complete all as specifed and directed.

All as per item No.98 above but plain busket size 20 x 19 x 8 incles complete all as specifed and directed.

Excavation in trenches n. exc. 1.50 m wide and n. exc. 1.50 m deep for foundation of sewage lines, man holes etc; n. exc. 10 sq m on plan and n. exc. 1.50 m depth and getting out in hard dense soil, complete all as specified

M & L for cement concrete type D-2, 1:4:8 mix (using 40mm graded stone aggregate) in foundation, complete all as specified

M & L for cement concrete type B-1, 1:2:4 mix (using 20 graded stone aggregate) as in benching including necessary formwork.

Extra for forming fair finished to channel or drain 30 cm inner girth in cement concrete using extra cement including mitred/ stopped ends, frames mould etc; complete.

M & L for cement concrete type C-1, 1:3:6 mix (using 20mm graded stone aggregate) in bed blocks, coping etc; including necessary formwork all as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 surface finished even and smooth without using extra cement.

M&L for Preparation of new plastered surfaces and applying one Coats of cement base paint on Walls complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n exc 25 cm in any type of soil

Removing excavated soil to a distance exceeding 250 metre but not exceeding 500 metere and depositing where directed at a level not exceeding 1.5 meter above the starting point.

Providing pre cast reinforced concrete type B-1, 1:2:4 mix (using 20mm graded stone aggregate) for cover slab, set in CM 1:4 including necessary form work.

M&L for Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete.

M&L for Rolled mild steel in joist, channel, angle, or tee sections, fixed independently without connecting plates, etc.Fe-410-W(Gde-E-250) Quality A

M&L for RCC pipe 200mm dia. Class - NP-2 one coller per length of pipe complete all as specified and directe.

Providing plain cement concrete type C-2, 1:3:6 mix (using 20mm graded stone aggregate) as in bed to drain pipes of 200mm bore including packing under and haunching against the sides of pipes after they are laid and tested as specified.

Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation etc. and getting out in hard/ dense soil.

M&L for RCC Nominal mix Type A 1 1: 1.5: 3 (20mm graded aggregate) including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L for RCC Nominal mix Type A 1 1: 1.5: 3 (20mm graded aggregate) as in lintels, plinth beams, bands, coping etc including necessory form work complete all as specified and directed.

M&L for RCC Nominal mix Type A-1;1.5;3 (using 20mm graded stone aggregate) as in column pillars post and strts, complete all as specified

M&L for RCC Nominal mix Type A 1 1: 1.5: 3 (20mm graded aggregate) for slabs supported on walls, beams and column in floors, roofs, alndings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified

M&L for formwork to sides and soffits of lintel/ lintel band for flat and rough finished surface of concrete complete all as specified

Formwork to sides of concrete in foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surfaces of concrete, complete all as specified

M&L for Formwork to sides of pillars, posts, struts, columns etc, rough finished surfaces of concrete.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L for mild steel TMT Bars 6mm dia to 10mm dia length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90mm dia or securing with chip), complete all as specified

All as per item No.127 above but 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders, complete all as specified

M&L for Brick work with sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified

M&L for rendering, 05mm thick in cm 1:4, on ceiling surfaces finished even and smooth without using extra cement, complete all as specified

M &L for preparation of newly plastered surface and applying three coats of white wash on ceiling surfaces complete all as specified

S&F 150mm size extruded aluminium alloy handles, fabricated type, complete all as specified

M&L for broken stone or bounders hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a floor/ true surface, complete all as specified

M & L for 75mm thick PCC type B-2 1:2:4 (40mm graded stone aggt) in top layer of floor to be finished even and smooth with using extra cement, complete all as specified

Removing excavated material exc 1.5 km but n exc 5 km away from MoD Land form the starting point, complete all as specified

S & F Vitreous china urinals, Half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2,securing urinal to plugs with and including 60mm long brass screws, with grating and union for discharge pipe incl 40mm waste coupling, 375mm long pvc connection and waste pipe complete all as specified

S&F vitreous china, white, wash hand basin, flat back size 550 x 400mm 'including MS brackets including cutting for and pinning in, including waste pipe, complete all as specified

S&F 15mm dia brass chromium plated swan neck pillar tap, fancy type with or without lettered 'Hot' or 'Cold', with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as specified

S&F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified

S&F powder coating anodised aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremess including removing old steel ventilators incl finishes the demolition surfaces with rendering 10-15mm thick CM 1:4 of fair finshes including filling the holdfast holes with PCC 1:2:4 (12.5mm graded aggregate) including 02 coat of cement based paints with primer incl all fittings, accessories complete all as specified.

M&L for Water proofing treatment on "Non approachable/ non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed complete including removal of existing treatment. (i) Surface prepration like opening the cracks/ removal of loose concerete. (ii) Pressure washing the entire roof to remove dirt, dust alage fungi or other contaminants from joints and entire surface. (iii) Saturation of surface nano technology based deep penetrating sealer application to block pores, capillaries and micro cracks. (iv) Filling the crack with flexible polymer based caulk and further sealing with reinforcement fabric elastomeric coating. (v) Sealing joints and coving area with flexi reinforcement fabric and elastomeric coating. (vi) Priming coat of dr fixit URP with fiber mesh (vii) First and Second coat of elastomeric dr fixit Roof Seal.

Taking down carefully copper/ alluminium point wiring (light, fan, sockets or power) complete including all fitings and fixtures such as switches, sockets, ceiling roses, pendens, rgulators, light fittings etc, removing matrials to store for taking credit and making good disturbed surfaces complete all as specified and directed.

Taking down carefully copper/ aluminium sub-main wiring any type and making good the disturbed surface of walls and floors complete all as specified

Taking down existing ceiling fans and exhaust fan of any size and re-fixing the same after B/R work including winding of fan, replacement of defective parts, painting of the complete fan with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter and providing three core flexible copper cable for connection from ceiling rose/ connector complete all as specified

Taking down existing Gysers 25 ltr in position and re-fixing the same after B/R work including overhauling, replacement of defective parts with new parts and painting of the same with synthetic enamel paint by spraying including overhaulling filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from Metal clad/ power socket to Gyser and unserviceable geyser deposit to MES store yard of AGE E/M-III complete all as specified

Taking down existing single/ three phase electric energy meter of any capacity after disconnecting all necessary electrical connections and refixing the same carefully on the wooden rectangular board of suitable size after compltion of B&R Work complete all as specified

Taking down carefully MCB DBs/ sheet metal earth plug socket any size and any type including MCBs any type and making good the disturbed surface of walls and floors complete all as specified

Taking down carefully light fitting any type or taken in schedule of credit complete all as specified

Point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular flush box with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for the following:- Note:- Make of modular GI box should be same with switch/ socket.

One light/ fan/ bell controlled by one, one way switch 5/6 Amps, complete all as specified

One 3 pin, 5/6 Amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch, complete all as specified

One 3 pin, 5/6 Amps socket outlet point on same board controlled by one, one way 5/6 Amps switch, complete all as specified

Point wiring with 2.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 2.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 Amps socket out-let point on an independent board including modular metal flush box, cover plate and cover frame of suitable size incl taking down carefully copper/ alluminium power point wiring switches, sockets and making good disturbed surface of walls and floors etc. complete all as specified and directed

All as per item No.150 here in before but using 4.0 Sqmm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for geyser point/AC point connecting to metal plug and socket DB incl necessary running of 4.0 Sqmm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC point) Note:- Make of modular GI box should be same with switch/ socket.

S & F of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V, complete all as specified

S & F modular switch 1 way 6 A, 1 module, complete all as specified

S & F modular socket 6 Amps 2/3 pin combined 2 module, complete all as specified

S & F switch modular type 16 A, 1 module complete all as specified

S & F socket modular type multipurposes 6/16 A, 2 module complete all as specified

S & F bell push flush type, 5 Amp, complete all as specified

S & F lamp holder insulated body with back plate for batten fittings, complete all as specified

S & F Buzzer Ding Dong AC 230 Volts Single pole, complete all as specified

Supply and fixing Inverter LED batten 4 feet 20 watt 6500K with squre profile and polycarbonate channel. Lithium lon battery with charging time 8 hourse -10 hourse and back up time upto 4-10 hours. with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories, complete all as specified

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified

Supply and fixing 10W LED 6500K lights fitting Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories complete all as specified

S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provision of LED bulb 10 watts complete all as specified

Supply and fix LED bulb of 7 watt, Of base B-22, Cat Part No LHLDBWHB4L8R007, lm 700, col tamp 6500 K suitable for fixing in lamp holder, complete all as specified

S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts, IP-43 IK-09 protection, double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of complete all as specified

S&F MCB DB SPN 8 way double door with 200 Amps rated bus bar, 230 volts, 50 Hz, IP-43 IK-09 protection including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall, complete all as specified

Supply and fixing Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 Amps and current carrying capacity in the MCB DB complete including connection with suitable size of aluminium/ copper lugs, testing and commissioning, complete all as specified

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB Complete including connection with suitable size of aluminium/ copper lugs, testing and commissioning, complete all as specified

Supply and fixing MCB TPN 63 Amp rating 4P, 240V, 10KA 'C' curveminiature circuit breaker and current carrying capacity in the MCB DB including connection with suitable size of aluminium/ copper lugs, testing and commissioning, complete all as specified

S&F replacement of ceiling fans complete with blades, down rods 15mm/ 12mm upto two mtr, electronic regulator and remote with battery and complete accessories, 230 V, 50Hz, 1200mm sweep and rated power 26W (+ 10%) and rate speed 350 RPM (+ 10%) Min air delivery 210 CFM with service value shall not be less than 8.46 BEE as per BIS. Five star rated with brushless direct current motor (BLDC), painting to match with existing surfaces including writing the MES number with synthetic enamel paint ,complete all as specified

S & F for energy efficient exhaust fan havey duty of 300mm sweep made of metal body Ventil Air -DS type complete with louver/ mesh wire with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writting the MES Number with synthetic enamel paint compelte all as specified and directed. Note :- Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted), complete all as specified

Supply & fix plastic body exhaust fan, AC single phase 230/ 240 V of size 250/200mm sweep with louver/ mesh wire, white in colour including cutting of wall for suitable opening and duly connection with copper wire from ceiling rose etc complete all as specified and directed incl making/ alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces, complete all as specified

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. necessary electrical connection incl taking down and safe deposit of old unserviceable Geyser to E/M Store complete all as directed by Engr-in-charge.

M & L for sub main wiring with 02 runs of 6 sqmm main wire along with 01 run of 06 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same & taking down complete all as specified and directed. Note:- Two runs of main copper conductor, one run of earth wire of same size and one run of PVC conduit shall be measured as one unit length.

All as per item No.174 here in above but with 2 runs of 4 sqmm main wire along with 01 runs of 4 sqmm earth wire complete all as specified

All as per item No.174 here in above but with 2 runs of 2.5 sqmm main wire along with 01 runs of 2.5 sqmm earth wire complete all as specified

All as per item No.150 here in before but using 4.0 sqmm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for geyser point/AC point connecting to metal plug and socket DB incl necessary running of 4.0 sqmm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC point)

M&L for single pole and earth encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with onesingle pole MCB SP 20 Amps complete all as specified and directed.

M& L for replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

Supply, laying and testing and commisioning cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core laid in pipes, trenches/ducts, on poles complete all as specified and directed. including taking down existing old unserviceble LT UG/ service/ unseviceble cable of any descrition and size

Supply laying and jointing GI pipe 'light grade' 50mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc 1.5m deep in hard/ dense soil and getting out complete all as specified and directed by Engr-in-Charge.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed.

Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed.

M&L for filling approved fine river sand in trenches as cable cushion to the full width of excavated trench, under and over cable complete all as specified and as directed. (Note : Punned thickness of sand shall be measured)

M&L for bricks slightly over burnt (kiln burnt), modular bricks, best quality, locally available, laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection all as specified and as directed.

S & F for Modular type TV Socket out let complete all as specified and as directed.

S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20/25 mm dia for TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster and exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipehooks etc complete all as specified and directed.

BHATIA ASSOCIATES (BID ID -3271427)

sunway associates (BID ID -3275624)