8524 MISC BR ITEMS AND REPAIR AND MAINT OF MANGLORE TILES AND GALVALUMNE SHEETS, EVES BOARD , FALSE CEILING INCLUDING JOINERY IN AND OTM ACCN AND SOUTH CAMPUS AT AFMC AREA UNDER GE (CENTRAL) PUNE

Amount

M & L Roof tiles, Mangalore pattern, class 'AA' , inerlocking at side joints, laid dry including dismantling single layer Mangalore pattern or similar tiles in roofing Note : Rates quoted deemed to include as work will be carried out at any height with proper safety materials/ precaution should be implemented by you and your labours/ supervisor.

Re-fixing only for Roof tiles, Mangalore pattern, class 'AA' , inerlocking at side joints, laid dry including dismantling single layer Mangalore pattern or similar tiles in roofing Note : Rates quoted deemed to include as work will be carried out at any height with proper safety materials/ precaution should be implemented by you and your labours/ supervisor.

S&F ridge or hip tiles class ‘AA’ to suit manglore pattern roofing tiles bedded and jointed in CM 1:6 including dismantling single layer Mangalore pattern or similar tiles in roofing portions bedded in lime or cement mortar Note : Rates quoted deemed to include as work will be carried out at any height with proper safety materials/ precaution should be implemented by you and your labours/ supervisor.

Re-fixing only for ridge or hip tiles class ‘AA’ to suit manglore pattern roofing tiles bedded and jointed in CM 1:6 including dismantling single layer Mangalore pattern or similar tiles in roofing portions bedded in lime or cement mortar Note : Rates quoted deemed to include as work will be carried out at any height with proper safety materials/ precaution should be implemented by you and your labours/ supervisor.

M & L II nd class hard wood battens, clean sawn, at 30 cm centres, sectional area exceeding 5 Sqcm but not exceeding 15 Sqcm, fixed with nails including dismantling battens for tiles, shingles etc of any size including tilting fillets, spaced exc.15 cm.

Demolition of cement concrete of any description & in any position not otherwise specifically provided for.

M & L for II nd class hard wood boarding 20 mm thick, clean, sawn, planned one side with butt joints, fixed with nails in any situation including dismantling Boarding of any description fixed in any position with nails,with or without cover fillets. Note : Rates quoted deemed to include as work will be carried out for Eves Board at any height with proper safety materials/ precaution should be implemented by you and your labours/ supervisor.

Re-fixing only for II nd class hard wood boarding 20 mm thick, clean, sawn, planned one side with butt joints, fixed with nails in any situation including dismantling Boarding of any description fixed in any position with nails,with or without cover fillets. Note : Rates quoted deemed to include as work will be carried out for Eves Board at any height with proper safety materials/ precaution should be implemented by you and your labours/ supervisor.

S&F Galvanised, corrugated mild steel sheeting of 0.63mm thickness with two corrugations side lap, fixed with L type or J type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 including dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings ,any description and in any position, all as directed.

S&F galvanized plain mild steel sheeting 0.63 mm thick in ridges, hips, valley gutters, drip & straight flashings (length and firth as fixed ) with grade of zink coating 275 including dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings ,any description and in any position, all as directed.

M&L for Clean sawn Second class hard-wood in timber framed and fixed scantlings including dismantling timber scantlings 40 sq. cm and over in section, in any position of framed work

Re-fixing Clean sawn Second class hard-wood in timber framed and fixed scantlings including dismantling timber scantlings 40 sq. cm and over in section, in any position of framed work

M&L for 2nd class hardwood,plain fillets exc 13 Sqcm n exc 25 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads including dismantling fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section of un-framed work

M&L Tiles or slate battens, any size and spacing, prepared and treated all over with two coats of creosote oil

M&L Straight cutting and waste to square abutments, chimney stacks, verges, etc.

M&L for Raking cutting and waste to hips, valleys, etc.

M&L for filleting in any position & to any shape, sectional area exc.25 but n. exc. 50 sqcm. In CM 1:4 including all mitres , stops etc, complete all as specified.

M and L two coat of synthetic enamel painting to wooden surfaces over a coat of pink primer incl preparation of wooden surface, Surfaces of any description, not otherwise descri-bed, over 10cm width or girth

M and L preparation of old wooden surface and applying one coat of synthetic enamel painting to old wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets Fixed with L-type or J-type or cranked hook bolts in roofs, walls etc including dismantling old AC Sheet roofing or similar pattern roof coverings ,any description and in any position, all as directed.

M&L for Asbestos cement one piece plain angular ridge 6mm thick including dismantling old AC Sheet ridge or similar pattern roof coverings ,any description and in any position, all as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling Plain or corrugated steel sheeting, any gauge, thickness or similar pattern roof coverings ,any description and in any position, all as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling Plain or corrugated steel sheeting, any gauge, thickness or similar pattern roof coverings ,any description and in any position, all as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle leats or other connecting plates , Fe 410 -W (Gde- E- 250) quality-A

S&F Welded steel wire fabric supplied and fixed complete to wood or steel members Weight per square metre not exc 4 kg

S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; similar work conforming to Fe.290.Gde-E-165

S&F wind ties for roof including securing bolts, and similar work conforming to Fe-290 Gde E-165

M & L two coat of synthetic enamel paint on steel surfaces over one coat of zinc primer including preparation of new steel surfaces exceeding 10 cm width or girth

Complete removal of existing old bitumenous tarfelt (water proofing treatment) including cement screed bed and PCC padding and clean the surface with wire brush and washing with water to achieve the original surface of slab all as specified and directed and M & L water proofing treatment to RCC roof slab, walls, chajjas etc, shall be carried out as specified below and as directed by Engr-in-charge (a) M & L for 50mm avg thickness PCC 1:2:4 type B0 (by using stone aggregate size 12.5mm) as used in padding on the roof surface to provide proper slope towards the rain water pipe and laying 10 mm thick plaster screed bed layer in CM 1:3 on green concrete surfaces by using Water proofing compound @ manufactures instructions of SIKA/ Doctor FIXIT (b) Preparing plastered surfaces of roof slab, walls, chajjas etc, by brooming with broom sweeping free from dirt dust etc and evenly applying one coat of oil based cold bituminous primer @ 0.7Kg per Sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane, non woven, polyster, weighing not less than 3.6 Kg/Sqm and 3 mm thick with laps and overlaps as specified and joints sealed and applied complete by torch application method all as specified and directed by Engr-in-charge (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified and as directed by Engr-in-charge.

Supply only integral Waterproofing compound.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded agg as in PCC padding in roof , roof kerbs or mud stops, rounded and chamfered on edges and on chajjas laid over RCC surface finished even and smooth without using extra cement includng necessary water proofing chemicals all as specified and directed by the Engr-in-charge. (Note : WPC shall be measured and paid separately)

Complete removal of existing old bitumenous tarfelt (water proofing treatment)/ any type of old treatment on RCC/ PCC surface including cement screed bed and PCC padding and clean the surface with wire brush and washing with water to achieve the original surface of slab all as specified and directed and M & L water proofing treatment to RCC roof slab, walls, chajjas etc, shall be carried out as specified below and as directed by Engr-in-charge and Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Ultrablock Block 2K Suin 2 coats having 200 % elongation as per ASTM 2370 , resisting 5 bars hyrostatic pressure as per DIN 1048, crack bridging min. 2mm as per EN 1062 -7 :2004.Applying SC Ultra block 2k in two coats in SSD condiition at a coverage of 1.5 kg per sqm , Mixing of powder to Liquid in the ratio of 60:40 parts by weight complete with and including laying 10 mm thick plaster screed bed layer in CM 1:3 on green concrete surfaces by using Water proofing compound @ manufactures instructions of SIKA/ Doctor FIXIT

S&F in true horizonal level false ceiling using non asbestos (fibre cement) pre-painted decorative tiles of size 595x595x4mm thick manufactured by V- Board or equivalent including GI snap grid of size (600x600)mm, using hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm having 0.27mm gauge at every 1200mm, centre to centre maximum and rotary stitched cross tee of size 24x 32mm, having 0.25mm gauge at 1200mm c/c & Wall angle of size 19x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI wire with and including dismantling of boarding, any description fixed in any position with nails i.e. false ceiling and wall lining etc and similar position fixed with screws complete.

Taking down Chowkats or frames with shutters (w/o taking of shutters from the frame) exc. 1.5 Sqm but n.exc. 4 Sqm & removing from site.

Taking down Chowkats or frames with shutters (w/o taking of shutters from the frame) area n. exc 1.5 Sqm removing from site

Taking down shutter of any description and removing frome site exc. 1 Sqm & n. exc. 2 Sqm each.

S&F II nd class hard wood (haldu/ hallock) plain, solid, straight chowkats & frames , wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete.

Cutting holes in stone / brick walls built in cement mortar for inserting hold fasts measured from face of jambs into wall exc. one brick but n. exc.two bricks &making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required.

S&F mild steel flat iron as in hold fasts fitted to chowkats with nails & welded to angle iron frames complete.

S&F 2nd class 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

S/F 2nd Class H.W. Skeleton shutter 35 mm thick open rebated & prepared to receive glass, gauze, etc. divided into squares with plain chamfered or rounded & rebated sash bars (of any nos)as spd in SSR Pt-I Sec 8 Cl. 8.20.(a).

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F 100 mm long stainless steel but hinges medium weight colld rolld.

S&F 150 mm long stainless steel barrel tower bolt of extruded section.

Supply and fix 150mm long Extruded stainless steel handles, 150mm long fabricated type., anodised

S&F 300 mm long stainless steel sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alu allow.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Supply & fix in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones S&F 3 mm thick plain/frosted sheet glass ordinary quality & glazing with oil putty in squares n. exc. 0.5 Sqm in each pane.

S&F, Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

Parhar Enterprise (BID ID -3111547)

UNIQUE ENGINEERS (BID ID -3113902)

L.T Associate (BID ID -3113143)

M/s.BAJRANG CONSTRUCTION (BID ID -3106313)

PRASHANT CONSTRUCTION (BID ID -3112705)

L.K.R.TIWARI CONSTRUCTION (BID ID -3122996)