Renovation works of School Building of Tipam Phakeyal M V School Tipam Dibrugarh Assam

Amount

10mm thick cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. (a) In cement mortar 1:4

15mm thick cement plaster in single coat on sigle or brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm in girth and finished even and smooth including curing complete as directed (A) on rough side (a) In cement mortar 1:4

Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade an new wall surface to give an even shade, over and includind a priming coat with distemper primer of approved brand and manufacture after thoroughly brooming the surface free from mortar dropping and other foreign matter and including preparing surface even and sand papered smooth (i) Priming coat with distemper primer

(ii)Top coat

Applying one coat of cement primer of approved brand and manufacture on new wall surface after thoroughly brooming the surface free from mortar droppings and other foreign matters including preparing surface even and sand papered smooth.

Finishing wall with waterproofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coat) to give an even shade after thoroughly brooming the surface to remove all dirt and remains of loose powdered materials.

Providing wood work in frames of false ceilings, partitions etc. sawn, wrought, framed hoisted and fixed in positions with spikes, nails , M.S. flat, angle / cleats with bolts and nuts completes including kiricide oiling two coats to unexposed surface of the timber (M. S. flats, angle cleats and bolts and nuts required for flats, angle cleats wherever necessary shall be measured and paid separately) . (a) With Gamari / Bonsum / sundi.

Providing, fitting and fixing hard board sheet ceiling wIth approved quality with necessary nails, wood screws including Ist class local wood 50mm x 12mm (hollock/ bonsum/ sundi) beading including painting two coats to timber beads complete as directed (ceiling joist to be measured and paid separately). a) 4.5 mm thick.

Providing, fitting, hoisting and fixing of roof trusses including purlins fabricated using M.S circular hollow section conforming to relevant I.S.Code as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paint complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawings as directed. b) Using other ISI marked approved circular hollow section.

Providing Corrugated galvanised iron sheet roofing of TATA SHAKTEE / SAIL / JSW steel including fitting and fixing necessary galvanised J or L hooks, bolts and nuts 8 mm dia with bitumen washer 25 mm dia x 3 mm thick and 1.6 mm thick limpet washer complete excluding the cost of roof truss, purlin etc. (Roof trusses and purlin etc. to be measured and paid separately) (a) 0.50 mm thick

Providing brick soling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewaterind, complete. (a) Brick on flat soling

25mm thick cement concrete topping 1:2:4 (1-cement : 2 coarse sand : 4 coarse aggregate of 12mm nominal size) finished with a floating coat of neat cement finish to be laid in panels including curing complete as directed.

Applying priming coat over new wood and wood based surfaces over 100mm in width/girth after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. a) With ready mixed paint, wood primer (Pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asiant paint/ Berger paint/ ICI paint, J & N paint / Nerolac) to give an even shade including cleaning the surfaces of dirt, dust and other foreign matter sand papering and stopping .i) Surface over 100mm in width or girth. a) General purpose (Asian paint / Berger / ICI / J&N / Nerolac)

Providing, fitting and fixing steel window / ventilator (openable) of standerd rolled steel section as per relevent I.S. code-1038 joints mitered and welded with 15mm x 3mm x 100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than than 65mm and not less than 15mm wide) bolting device and steel handles, pegs, stays of 300mm long etc. complete as per drawing including applying a priming coat of red lead paint.

Providing, fitting and fixing door frame made of M.S. equal angle of size 40mm x 40mm x 5mm fabricated, welded, mitred and jointed as per relevent I.S. codes including fitting 8nos. of M.S. hold fast, providing closing / holding device for two nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall / R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates).

Steel work riveted and / or bolted / riveted in built up sections, frame work including cutting, hoisting, fixing in position and applying a priming red-lead paint upto 4.6m height above plinth level including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed . a) In beams and joists with connecting plates / angle cleats.

a) Painting two coats (excluding priming coat) on new steel and other matel surfaces with enamel paint of approved brand and manufacture (Asian paint / Berger paint / ICI paint / J & N paint / Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter .i) Surface over 100mm in width or girth. a) General purpose (Asian paint / Berger / ICI / J&N / Nerolac)

ii) Surface up to 100mm in width or girth .a) General purpose (Asian paint / Berger / ICI / J&N / Nerolac)

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (l)in substructure up to plinth level including dewatering if necessary, (a) In propotion 1:3

Providing,fitting and fixing on walls,18 mm thick Makrana white marble tiles of size 80x60 cm,making groove for loggo and lettering including painting of loggo and letters as per specifications and directions of Engineer-in-charge

Bidder Name

Amount in Words

DHIREN SAIKIA

DURNA CHETIA

JATIN BORAH

DHIREN SAIKIA

DURNA CHETIA